Changeset 854 in 3DVCSoftware for branches/HTM-10.0-dev0/cfg/MV-HEVC


Ignore:
Timestamp:
13 Feb 2014, 22:58:51 (11 years ago)
Author:
tech
Message:

Integrated following MV-HEVC HLS 7 items:

H_MV_HLS7_GEN Stub for further integrations (not tested)
H_MV_HLS_7_OUTPUT_LAYERS_5_10_22_27 Output layer sets, various

(VPS/P0300/alt output layer flag) #27 Change alt output layer flag to be signalled within the loop of output layer sets, from JCTVC-P0300-v2. Decision: Adopt.
(VPS/P0156/Num of output_layer_flag) #10 Proposal 3: The output_layer_flag[ i ][ j ] is signalled for j equal to 0 to NumLayersInIdList[ lsIdx ] inclusive. It was remarked that we might be able to just assume that the top layer is always output; however, this was not entirely clear , so the safe thing to do may be to also send the flag for this layer.
(VPS/P0295/Default output layer sets) #5 Discussion from (P0110). Decision: Three-state approach (text in P0295, decoder shall allow 3 to be present and shall treat 3 the same as the value 2).

H_MV_HLS_7_HRD_P0156_7 (HRD/P0156/MaxSubLayersInLayerSetMinus1) #7 Proposal 1: signal, in the VPS extension, the DPB parameters for an output layer set for sub-DPBs only up to the maximum temporal sub-layers in the corresponding layer set
H_MV_HLS_7_VPS_P0048_14 (VPS/P0048/profile_ref_minus1 rem) #14 Remove profile_ref_minus1 from the VPS extension, from JCTVC-P0048
H_MV_HLS_7_VPS_P0076_15 (VPS/P0076/video signal info move) #15 Move video signal information syntax structure earlier in the VPS VUI.
H_MV_HLS_7_SPS_P0155_16_32 (SPS/P0155/sps_sub_layer_ordering_info) #16, #32 Not signal the sps_max_num_reorder_pics[], sps_max_latency_increase_plus1[], and sps_max_dec_pic_buffering_minus1[] syntax elements in the SPS when nuh_layer_id > 0.
H_MV_HLS_7_GEN_P0166_PPS_EXTENSION (GEN/P0166/pps_extension) #17 Add PPS extension type flags for conditional presence of syntax extensions per extension type, aligned with the SPS extension type flags, from JCTVC-P0166. Further align the SPS extension type flags syntax between RExt and MV-HEVC/SHVC
H_MV_HLS_7_FIX_SET_DPB_SIZE Fix derivation dpb size parameters
H_MV_HLS_7_RESERVED_FLAGS Added flags

(SPS/P0312/SHVC reserved flag) The flag will be used for the syntax vert_phase_position_enable_flag in SHVC draft
 (VPS/O0215/SHVC reserved flag): this flag will be used for the syntax cross_layer_phase_alignment_flag in SHVC draft.
(VPS VUI/O0199,P0312/SHVC reserved flags) the 3 reserved bits will be used for the syntaxes single_layer_for_non_irap_flag, higher_layer_irap_skip_flag and vert_phase_position_not_in_use_flag in SHVC draft.

H_MV_FIX_VPS_LAYER_ID_NOT_EQUAL_ZERO Discard VPS with nuh_layer_Id > 0
H_MV_HLS_7_MISC_P0130_EOS (MISC/P0130/EOS NAL layer id) #19 Require that end of bitstream NAL unit shall have nuh_layer_id equal to 0, from JCTVC-P0130. Decoders shall allow an end of bitstream NAL unit with nuh_layer_id > 0 to be present, and shall ignore the NAL unit.
H_MV_HLS_7_MISC_P0182_13 (MISC/P0182/BL PS Compatibility flag) #13 Define the flag (in VPS VUI) with the proposed semantics, without specifying an associated extraction process. Editors to select the position in the VPS VUI.
H_MV_HLS_7_MISC_P0068_21 (MISC/P0068/all irap idr flag) #21 Add flag in VUI to indicate that all IRAP pictures are IDRs and that all layer pictures in an AU are IDR aligned, from JCTVC-P0068 proposal 1.
H_MV_HLS_7_FIX_INFER_CROSS_LAYER_IRAP_ALIGNED_FLAG Fix inference of cross_layer_irap_aligned_flag
H_MV_HLS_7_MISC_P0079_18 (MISC/P0079/NumActiveRefLayerPics) #18 Modification of derivation of variable NumActiveRefLayerPics.

Location:
branches/HTM-10.0-dev0/cfg/MV-HEVC
Files:
1 deleted
8 edited

Legend:

Unmodified
Added
Removed

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/NonCTC/gopCfg_IBP_3view.cfg

    r622 r854  
    99#======== VPS / Layer sets ================
    1010VpsNumLayerSets               : 3            # Number of layer sets   
    11 LayerIdsInSet_0               : 0            # LayerIdcs in vps of layer set
    12 LayerIdsInSet_1               : 0 1          # LayerIdcs in vps of layer set
    13 LayerIdsInSet_2               : 0 1 2        # LayerIdcs in vps of layer set
     11LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     12LayerIdsInSet_1               : 0 1          # Indices in VPS of layers in layer set 1
     13LayerIdsInSet_2               : 0 1 2        # Indices in VPS of layers in layer set 2
    1414
    15 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    16 OutputLayerSetIdx             : 1 2          # Indices of layer sets used as additional output layer sets
    17 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds in vps of additional output layers
    18 LayerIdsInAddOutputLayerSet_1 : 2            # LayerIds in vps of additional output layers
     15DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     16OutputLayerSetIdx             : 1 2          # Indices of layer sets used to derive additional output layer sets
     17LayerIdsInAddOutputLayerSet_0 : 1            # Indices in VPS of output layers in additional output layer set 0
     18LayerIdsInAddOutputLayerSet_1 : 2            # Indices in VPS of output layers in additional output layer set 1
     19
    1920ProfileLevelTierIdx           : 0 0 0 0 0    # Indices to profile level tier (TBD)
    2021
    2122#======== VPS / Dependencies ================
    22 DirectRefLayers_1             : 0           # LayerIds in vps of direct reference layers
    23 DirectRefLayers_2             : 0 1         # LayerIds in vps of direct reference layers
     23DirectRefLayers_1             : 0           # Indices in VPS of direct reference layers
     24DirectRefLayers_2             : 0 1         # Indices in VPS of direct reference layers
    2425DependencyTypes_1             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
    2526DependencyTypes_2             : 2 2         # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/NonCTC/gopCfg_IPB_on_IRAP_3view.cfg

    r622 r854  
    33#======== VPS / Layer sets ================
    44VpsNumLayerSets               : 4            # Number of layer sets   
    5 LayerIdsInSet_0               : 0            # LayerIds in vps of layer set
    6 LayerIdsInSet_1               : 0 1          # LayerIds in vps of layer set
    7 LayerIdsInSet_2               : 0 2          # LayerIds in vps of layer set
    8 LayerIdsInSet_3               : 0 1 2        # LayerIds in vps of layer set
     5LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     6LayerIdsInSet_1               : 0 1          # Indices in VPS of layers in layer set 1
     7LayerIdsInSet_2               : 0 2          # Indices in VPS of layers in layer set 2
     8LayerIdsInSet_3               : 0 1 2        # Indices in VPS of layers in layer set 3
    99
    10 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    11 OutputLayerSetIdx             : 1 2          # Indices of layer sets used as additional output layer sets
    12 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds in vps of additional output layers
    13 LayerIdsInAddOutputLayerSet_1 : 2            # LayerIds in vps of additional output layers
     10DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     11OutputLayerSetIdx             : 1 2          # Indices of layer sets used to derive additional output layer sets
     12LayerIdsInAddOutputLayerSet_0 : 1            # Indices in VPS of output layers in additional output layer set 0
     13LayerIdsInAddOutputLayerSet_1 : 2            # Indices in VPS of output layers in additional output layer set 1
     14
    1415ProfileLevelTierIdx           : 0 0 0 0 0 0  # Indices to profile level tier (TBD)
    1516
    1617#======== VPS / Dependencies ================
    17 DirectRefLayers_1             : 0           # LayerIds in vps of direct reference layers
    18 DirectRefLayers_2             : 0 1         # LayerIds in vps of direct reference layers
     18DirectRefLayers_1             : 0           # Indices in VPS of direct reference layers
     19DirectRefLayers_2             : 0 1         # Indices in VPS of direct reference layers
    1920DependencyTypes_1             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
    2021DependencyTypes_2             : 2 2         # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/NonCTC/gopCfg_NoIv_3view.cfg

    r622 r854  
    11#======== VPS / Layer sets ================
    22VpsNumLayerSets               : 4            # Number of layer sets   
    3 LayerIdsInSet_0               : 0            # LayerIds in vps of layer set
    4 LayerIdsInSet_1               : 0 1          # LayerIds in vps of layer set
    5 LayerIdsInSet_2               : 0 2          # LayerIds in vps of layer set
    6 LayerIdsInSet_3               : 0 1 2        # LayerIds in vps of layer set
     3LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     4LayerIdsInSet_1               : 1            # Indices in VPS of layers in layer set 0
     5LayerIdsInSet_2               : 2            # Indices in VPS of layers in layer set 0
     6LayerIdsInSet_3               : 0 1          # Indices in VPS of layers in layer set 1
     7LayerIdsInSet_4               : 0 2          # Indices in VPS of layers in layer set 2
     8LayerIdsInSet_5               : 1 2          # Indices in VPS of layers in layer set 2
     9LayerIdsInSet_6               : 0 1 2        # Indices in VPS of layers in layer set 3
    710
    8 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    9 OutputLayerSetIdx             : 1 2          # Indices of layer sets used as additional output layer sets
    10 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds in vps of additional output layers
    11 LayerIdsInAddOutputLayerSet_1 : 2            # LayerIds in vps of additional output layers
    12 ProfileLevelTierIdx           : 0 0 0 0 0 0  # Indices to profile level tier (TBD)
     11DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     12
     13OutputLayerSetIdx             :              # Indices of layer sets used to derive additional output layer sets
     14
    1315
    1416#======== VPS / Dependencies ================
    15 DirectRefLayers_1             :             # LayerIds in vps of direct reference layers
    16 DirectRefLayers_2             :             # LayerIds in vps of direct reference layers
     17DirectRefLayers_1             :             # Indices in VPS of direct reference layers
     18DirectRefLayers_2             :             # Indices in VPS of direct reference layers
    1719DependencyTypes_1             :             # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
    1820DependencyTypes_2             :             # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/NonCTC/gopCfg_PIP_on_IRAP_3view.cfg

    r622 r854  
    33#======== VPS / Layer sets ================
    44VpsNumLayerSets               : 4            # Number of layer sets   
    5 LayerIdsInSet_0               : 0            # LayerIds in vps of layer set
    6 LayerIdsInSet_1               : 0 1          # LayerIds in vps of layer set
    7 LayerIdsInSet_2               : 0 2          # LayerIds in vps of layer set
    8 LayerIdsInSet_3               : 0 1 2        # LayerIds in vps of layer set
     5LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     6LayerIdsInSet_1               : 0 1          # Indices in VPS of layers in layer set 1
     7LayerIdsInSet_2               : 0 2          # Indices in VPS of layers in layer set 2
     8LayerIdsInSet_3               : 0 1 2        # Indices in VPS of layers in layer set 3
    99
    10 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    11 OutputLayerSetIdx             : 1 2          # Indices of layer sets used as additional output layer sets
    12 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds in vps of additional output layers
    13 LayerIdsInAddOutputLayerSet_1 : 2            # LayerIds in vps of additional output layers
     10DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     11OutputLayerSetIdx             : 1 2          # Indices of layer sets used to derive additional output layer sets
     12LayerIdsInAddOutputLayerSet_0 : 1            # Indices in VPS of output layers in additional output layer set 0
     13LayerIdsInAddOutputLayerSet_1 : 2            # Indices in VPS of output layers in additional output layer set 1
     14
    1415ProfileLevelTierIdx           : 0 0 0 0 0 0  # Indices to profile level tier (TBD)
    1516
    1617#======== VPS / Dependencies ================
    17 DirectRefLayers_1             : 0           # LayerIds in vps of direct reference layers
    18 DirectRefLayers_2             : 0           # LayerIds in vps of direct reference layers
     18DirectRefLayers_1             : 0           # Indices in VPS of direct reference layers
     19DirectRefLayers_2             : 0           # Indices in VPS of direct reference layers
    1920DependencyTypes_1             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
    2021DependencyTypes_2             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/NonCTC/layerwise_startup_IBP_3view.cfg

    r738 r854  
    99#======== VPS / Layer sets ================
    1010VpsNumLayerSets               : 3            # Number of layer sets   
    11 LayerIdsInSet_0               : 0            # LayerIdcs in vps of layer set
    12 LayerIdsInSet_1               : 0 1          # LayerIdcs in vps of layer set
    13 LayerIdsInSet_2               : 0 1 2        # LayerIdcs in vps of layer set
     11LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     12LayerIdsInSet_1               : 0 1          # Indices in VPS of layers in layer set 1
     13LayerIdsInSet_3               : 0 1 2        # Indices in VPS of layers in layer set 3
    1414
    15 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    16 OutputLayerSetIdx             : 1 2          # Indices of layer sets used as additional output layer sets
    17 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds in vps of additional output layers
    18 LayerIdsInAddOutputLayerSet_1 : 2            # LayerIds in vps of additional output layers
     15DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     16OutputLayerSetIdx             : 1 2          # Indices of layer sets used to derive additional output layer sets
     17LayerIdsInAddOutputLayerSet_0 : 1            # Indices in VPS of output layers in additional output layer set 0
     18LayerIdsInAddOutputLayerSet_1 : 2            # Indices in VPS of output layers in additional output layer set 1
    1919ProfileLevelTierIdx           : 0 0 0 0 0    # Indices to profile level tier (TBD)
    2020
    2121#======== VPS / Dependencies ================
    22 DirectRefLayers_1             : 0           # LayerIds in vps of direct reference layers
    23 DirectRefLayers_2             : 0 1         # LayerIds in vps of direct reference layers
     22DirectRefLayers_1             : 0           # Indices in VPS of direct reference layers
     23DirectRefLayers_2             : 0 1         # Indices in VPS of direct reference layers
    2424DependencyTypes_1             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
    2525DependencyTypes_2             : 2 2         # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/baseCfg_2view.cfg

    r852 r854  
    2525#======== VPS/ Layer sets ================
    2626VpsNumLayerSets               : 2            # Number of layer sets   
    27 LayerIdsInSet_0               : 0            # LayerIds in vps of Layer set
    28 LayerIdsInSet_1               : 0 1          # LayerIds in vps of Layer set
     27LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     28LayerIdsInSet_1               : 0 1          # Indices in VPS of layers in layer set 3
    2929
    30 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    31 OutputLayerSetIdx             : 1            # Indices of layer sets used as additional output layer sets
    32 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds in vps of additional output layers
     30DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     31
     32OutputLayerSetIdx             : 1            # Indices of layer sets used to derive additional output layer sets
     33LayerIdsInAddOutputLayerSet_0 : 1            # Indices in VPS of output layers in additional output layer set 0
    3334ProfileLevelTierIdx           : 0 0 0        # Indices to profile level tier (TBD)
    3435
    3536#======== VPS / Dependencies ================
    36 DirectRefLayers_1             : 0           # LayerIds in vps of direct reference layers
     37DirectRefLayers_1             : 0           # Indices in VPS of direct reference layers
    3738DependencyTypes_1             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
    3839

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/baseCfg_3view.cfg

    r852 r854  
    2727#======== VPS / Layer sets ================
    2828VpsNumLayerSets               : 4            # Number of layer sets   
    29 LayerIdsInSet_0               : 0            # LayerIds in vps of layer set
    30 LayerIdsInSet_1               : 0 1          # LayerIds in vps of layer set
    31 LayerIdsInSet_2               : 0 2          # LayerIds in vps of layer set
    32 LayerIdsInSet_3               : 0 1 2        # LayerIds in vps of layer set
     29LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     30LayerIdsInSet_1               : 0 1          # Indices in VPS of layers in layer set 1
     31LayerIdsInSet_2               : 0 2          # Indices in VPS of layers in layer set 2
     32LayerIdsInSet_3               : 0 1 2        # Indices in VPS of layers in layer set 3
    3333
    34 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    35 OutputLayerSetIdx             : 1 2          # Indices of layer sets used as additional output layer sets
    36 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds in vps of additional output layers
    37 LayerIdsInAddOutputLayerSet_1 : 2            # LayerIds in vps of additional output layers
     34DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     35
     36OutputLayerSetIdx             : 1 2          # Indices of layer sets used to derive additional output layer sets
     37LayerIdsInAddOutputLayerSet_0 : 1            # Indices in VPS of output layers in additional output layer set 0
     38LayerIdsInAddOutputLayerSet_1 : 2            # Indices in VPS of output layers in additional output layer set 1
     39
    3840ProfileLevelTierIdx           : 0 0 0 0 0 0  # Indices to profile level tier (TBD)
    3941
    4042#======== VPS / Dependencies ================
    41 DirectRefLayers_1             : 0           # LayerIds in vps of direct reference layers
    42 DirectRefLayers_2             : 0           # LayerIds in vps of direct reference layers
     43DirectRefLayers_1             : 0           # Indices in VPS of direct reference layers
     44DirectRefLayers_2             : 0           # Indices in VPS of direct reference layers
    4345DependencyTypes_1             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
    4446DependencyTypes_2             : 2           # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion

  • branches/HTM-10.0-dev0/cfg/MV-HEVC/fullCfg.cfg

    r852 r854  
    3131#======== VPS/ Layer sets ================
    3232VpsNumLayerSets               : 4            # Number of layer sets   
    33 LayerIdsInSet_0               : 0            # LayerIds of Layer set
    34 LayerIdsInSet_1               : 0 1          # LayerIds of Layer set
    35 LayerIdsInSet_2               : 0 2          # LayerIds of Layer set
    36 LayerIdsInSet_3               : 0 1 2        # LayerIds of Layer set
     33LayerIdsInSet_0               : 0            # Indices in VPS of layers in layer set 0
     34LayerIdsInSet_1               : 0 1          # Indices in VPS of layers in layer set 1
     35LayerIdsInSet_2               : 0 2          # Indices in VPS of layers in layer set 2
     36LayerIdsInSet_3               : 0 1 2        # Indices in VPS of layers in layer set 3
    3737
    38 DefaultOneTargetOutputLayerFlag: 0           # Output highest layer of layer sets by default
    39 OutputLayerSetIdx             : 1 2          # Indices of layer sets used as additional output layer sets
    40 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds of additional output layers
    41 LayerIdsInAddOutputLayerSet_0 : 1            # LayerIds of additional output layers
     38DefaultTargetOutputLayerIdc   : 0            # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
     39LayerIdsInDefOutputLayerSet_0 :              # Indices in VPS of output layers in layer set 0 (when DefaultTargetOutputLayerIdc is equal to 2)
     40LayerIdsInDefOutputLayerSet_1 :              # Indices in VPS of output layers in layer set 1 (when DefaultTargetOutputLayerIdc is equal to 2)
     41LayerIdsInDefOutputLayerSet_2 :              # Indices in VPS of output layers in layer set 2 (when DefaultTargetOutputLayerIdc is equal to 2)
     42LayerIdsInDefOutputLayerSet_3 :              # Indices in VPS of output layers in layer set 3 (when DefaultTargetOutputLayerIdc is equal to 2)
     43
     44
     45OutputLayerSetIdx             : 1 2          # Indices of layer sets used to derive additional output layer sets
     46LayerIdsInAddOutputLayerSet_0 : 1            # Indices in VPS of output layers in additional output layer set 0
     47LayerIdsInAddOutputLayerSet_1 : 2            # Indices in VPS of output layers in additional output layer set 1
     48
     49
    4250ProfileLevelTierIdx           : 0 0 0 0      # Indices to profile level tier (TBD)
    43 
    4451#======== Unit definition ================
    4552MaxCUWidth                    : 64          # Maximum coding unit width in pixel
Note: See TracChangeset for help on using the changeset viewer.