Context navigation

source: 3DVCSoftware/trunk/cfg/MV-HEVC/baseCfg_3view.cfg @ 1003

Visit:

Last change on this file since 1003 was 964, checked in by tech, 10 years ago
Merged 11.0-dev0@963. (Update to HM 14.0 + MV-HEVC Draft 8 HLS) Added coding results. Changed version number.
File size: 15.6 KB

Rev	Line
[608]	1	#======== Legend for comments =====================
	2	# (m) specification per layer/dimension/layerset possible
	3	# (c) cyclic repetition of values, if not given for all layers/dimensions/layersets. (e.g. 5 layers and 1 2 3 -> 1 2 3 1 2 )
	4
	5	#======== File I/O =====================
	6
	7	InputFile_0 : newspapercc_4.yuv
	8	InputFile_1 : newspapercc_2.yuv
	9	InputFile_2 : newspapercc_6.yuv
	10
	11	BitstreamFile : stream.bit
	12
	13	ReconFile_0 : rec_4.yuv
	14	ReconFile_1 : rec_2.yuv
	15	ReconFile_2 : rec_6.yuv
	16
	17	NumberOfLayers : 3 # number of layers to be coded
	18
	19	#======== VPS ============================
[622]	20	ScalabilityMask : 2 # Scalability Mask ( 2: View Scalability, shall be 2 for MV-HEVC )
[608]	21	DimensionIdLen : 3 # Number of bits to store Ids, per scalability dimension, (m)
[622]	22	ViewOrderIndex : 0 1 2 # ViewOrderIndex, per layer (m)
	23	LayerIdInNuh : 0 # Layer Id in NAL unit header, (0: no explicit signalling, otherwise per layer ) (m)
[608]	24	SplittingFlag : 0 # Splitting Flag
[622]	25	ViewId : 1 0 2 # ViewId, per ViewOrderIndex (m)
[608]	26
	27	#======== VPS / Layer sets ================
	28	VpsNumLayerSets : 4 # Number of layer sets
[872]	29	LayerIdsInSet_0 : 0 # Indices in VPS of layers in layer set 0
	30	LayerIdsInSet_1 : 0 1 # Indices in VPS of layers in layer set 1
	31	LayerIdsInSet_2 : 0 2 # Indices in VPS of layers in layer set 2
	32	LayerIdsInSet_3 : 0 1 2 # Indices in VPS of layers in layer set 3
[964]	33	LayerIdsInSet_4 :
	34	LayerIdsInSet_5 :
	35	LayerIdsInSet_6 :
[608]	36
[964]	37
[872]	38	DefaultTargetOutputLayerIdc : 0 # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
	39
	40	OutputLayerSetIdx : 1 2 # Indices of layer sets used to derive additional output layer sets
	41	LayerIdsInAddOutputLayerSet_0 : 1 # Indices in VPS of output layers in additional output layer set 0
	42	LayerIdsInAddOutputLayerSet_1 : 2 # Indices in VPS of output layers in additional output layer set 1
[964]	43	LayerIdsInAddOutputLayerSet_2 : # Indices in VPS of output layers in additional output layer set 1
	44	LayerIdsInAddOutputLayerSet_3 : # Indices in VPS of output layers in additional output layer set 1
	45	LayerIdsInAddOutputLayerSet_4 : # Indices in VPS of output layers in additional output layer set 1
[872]	46
[608]	47	ProfileLevelTierIdx : 0 0 0 0 0 0 # Indices to profile level tier (TBD)
	48
	49	#======== VPS / Dependencies ================
[872]	50	DirectRefLayers_1 : 0 # Indices in VPS of direct reference layers
	51	DirectRefLayers_2 : 0 # Indices in VPS of direct reference layers
[608]	52	DependencyTypes_1 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
	53	DependencyTypes_2 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
	54
	55	#======== Unit definition ================
	56	MaxCUWidth : 64 # Maximum coding unit width in pixel
	57	MaxCUHeight : 64 # Maximum coding unit height in pixel
	58	MaxPartitionDepth : 4 # Maximum coding unit depth
	59	QuadtreeTULog2MaxSize : 5 # Log2 of maximum transform size for
	60	# quadtree-based TU coding (2...6)
	61	QuadtreeTULog2MinSize : 2 # Log2 of minimum transform size for
	62	# quadtree-based TU coding (2...6)
	63	QuadtreeTUMaxDepthInter : 3
	64	QuadtreeTUMaxDepthIntra : 3
	65
	66	#======== Coding Structure =============
	67	IntraPeriod : 24 # Period of I-Frame ( -1 = only first)
	68	DecodingRefreshType : 1 # Random Accesss 0:none, 1:CDR, 2:IDR
	69	GOPSize : 8 # GOP Size (number of B slice = GOPSize-1)
	70
	71	# QPfactor betaOffsetDiv2 #ref_pics_active reference pictures deltaRPS reference idcs ilPredLayerIdc refLayerPicPosIl_L1
[622]	72	# Type POC QPoffset tcOffsetDiv2 temporal_id #ref_pics predict #ref_idcs #ActiveRefLayerPics refLayerPicPosIl_L0
[608]	73
	74	Frame1: B 8 1 0.442 0 0 0 4 4 -8 -10 -12 -16 0 0
	75	Frame2: B 4 2 0.3536 0 0 0 2 3 -4 -6 4 1 4 5 1 1 0 0 1 0
	76	Frame3: B 2 3 0.3536 0 0 0 2 4 -2 -4 2 6 1 2 4 1 1 1 1 0
	77	Frame4: B 1 4 0.68 0 0 0 2 4 -1 1 3 7 1 1 5 1 0 1 1 1 0
	78	Frame5: B 3 4 0.68 0 0 0 2 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 0
	79	Frame6: B 6 3 0.3536 0 0 0 2 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 0
	80	Frame7: B 5 4 0.68 0 0 0 2 4 -1 -5 1 3 1 1 5 1 0 1 1 1 0
	81	Frame8: B 7 4 0.68 0 0 0 2 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 0
	82
[622]	83	FrameI_l1: P 0 3 0.442 0 0 0 1 0 0 1 0 0 -1
	84	Frame1_l1: B 8 4 0.442 0 0 0 4 4 -8 -10 -12 -16 0 1 0 1 -1
	85	Frame2_l1: B 4 5 0.3536 0 0 0 3 3 -4 -6 4 1 4 5 1 1 0 0 1 1 0 1 -1
	86	Frame3_l1: B 2 6 0.3536 0 0 0 3 4 -2 -4 2 6 1 2 4 1 1 1 1 1 0 1 -1
	87	Frame4_l1: B 1 7 0.68 0 0 0 3 4 -1 1 3 7 1 1 5 1 0 1 1 1 1 0 1 -1
	88	Frame5_l1: B 3 7 0.68 0 0 0 3 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 1 0 2 -1
	89	Frame6_l1: B 6 6 0.3536 0 0 0 3 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 1 0 2 -1
	90	Frame7_l1: B 5 7 0.68 0 0 0 3 4 -1 -5 1 3 1 1 5 1 0 1 1 1 1 0 2 -1
	91	Frame8_l1: B 7 7 0.68 0 0 0 3 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 1 0 2 -1
[608]	92
[622]	93	FrameI_l2: P 0 3 0.442 0 0 0 1 0 0 1 0 0 -1
	94	Frame1_l2: B 8 4 0.442 0 0 0 4 4 -8 -10 -12 -16 0 1 0 1 -1
	95	Frame2_l2: B 4 5 0.3536 0 0 0 3 3 -4 -6 4 1 4 5 1 1 0 0 1 1 0 1 -1
	96	Frame3_l2: B 2 6 0.3536 0 0 0 3 4 -2 -4 2 6 1 2 4 1 1 1 1 1 0 1 -1
	97	Frame4_l2: B 1 7 0.68 0 0 0 3 4 -1 1 3 7 1 1 5 1 0 1 1 1 1 0 1 -1
	98	Frame5_l2: B 3 7 0.68 0 0 0 3 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 1 0 2 -1
	99	Frame6_l2: B 6 6 0.3536 0 0 0 3 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 1 0 2 -1
	100	Frame7_l2: B 5 7 0.68 0 0 0 3 4 -1 -5 1 3 1 1 5 1 0 1 1 1 1 0 2 -1
	101	Frame8_l2: B 7 7 0.68 0 0 0 3 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 1 0 2 -1
[608]	102
	103	#=========== Motion Search =============
	104	FastSearch : 1 # 0:Full search 1:TZ search
	105	SearchRange : 64 # (0: Search range is a Full frame)
	106	BipredSearchRange : 4 # Search range for bi-prediction refinement
	107	HadamardME : 1 # Use of hadamard measure for fractional ME
	108	FEN : 1 # Fast encoder decision
	109	FDM : 1 # Fast Decision for Merge RD cost
	110
	111	#======== Quantization =============
	112
	113	MaxDeltaQP : 0 # CU-based multi-QP optimization
	114	MaxCuDQPDepth : 0 # Max depth of a minimum CuDQP for sub-LCU-level delta QP
	115	DeltaQpRD : 0 # Slice-based multi-QP optimization
	116	RDOQ : 1 # RDOQ
	117	RDOQTS : 1 # RDOQ for transform skip
	118
	119	#=========== Deblock Filter ============
	120	DeblockingFilterControlPresent: 1 # Dbl control params present (0=not present, 1=present) (mc)
	121	LoopFilterOffsetInPPS : 0 # Dbl params: 0=varying params in SliceHeader, param = base_param + GOP_offset_param; 1=constant params in PPS, param = base_param)
	122	LoopFilterDisable : 0 # Disable deblocking filter (0=Filter, 1=No Filter) (mc)
	123	LoopFilterBetaOffset_div2 : 0 # base_param: -6 ~ 6
	124	LoopFilterTcOffset_div2 : 0 # base_param: -6 ~ 6
	125	DeblockingFilterMetric : 0 # blockiness metric (automatically configures deblocking parameters in bitstream)
	126
	127	#=========== Misc. ============
	128	InternalBitDepth : 8 # codec operating bit-depth
	129
	130	#=========== Coding Tools =================
	131	SAO : 1 # Sample adaptive offset (0: OFF, 1: ON) (mc)
	132	AMP : 1 # Asymmetric motion partitions (0: OFF, 1: ON)
	133	TransformSkip : 1 # Transform skipping (0: OFF, 1: ON)
	134	TransformSkipFast : 1 # Fast Transform skipping (0: OFF, 1: ON)
	135	SAOLcuBoundary : 0 # SAOLcuBoundary using non-deblocked pixels (0: OFF, 1: ON)
	136
	137	#============ Slices ================
	138	SliceMode : 0 # 0: Disable all slice options.
	139	# 1: Enforce maximum number of LCU in an slice,
	140	# 2: Enforce maximum number of bytes in an 'slice'
	141	# 3: Enforce maximum number of tiles in a slice
	142	SliceArgument : 1500 # Argument for 'SliceMode'.
	143	# If SliceMode==1 it represents max. SliceGranularity-sized blocks per slice.
	144	# If SliceMode==2 it represents max. bytes per slice.
	145	# If SliceMode==3 it represents max. tiles per slice.
	146
	147	LFCrossSliceBoundaryFlag : 1 # In-loop filtering, including ALF and DB, is across or not across slice boundary.
	148	# 0:not across, 1: across
	149
	150	#============ PCM ================
	151	PCMEnabledFlag : 0 # 0: No PCM mode
	152	PCMLog2MaxSize : 5 # Log2 of maximum PCM block size.
	153	PCMLog2MinSize : 3 # Log2 of minimum PCM block size.
	154	PCMInputBitDepthFlag : 1 # 0: PCM bit-depth is internal bit-depth. 1: PCM bit-depth is input bit-depth.
	155	PCMFilterDisableFlag : 0 # 0: Enable loop filtering on I_PCM samples. 1: Disable loop filtering on I_PCM samples.
	156
	157	#============ Tiles ================
	158	UniformSpacingIdc : 0 # 0: the column boundaries are indicated by ColumnWidth array, the row boundaries are indicated by RowHeight array
	159	# 1: the column and row boundaries are distributed uniformly
	160	NumTileColumnsMinus1 : 0 # Number of columns in a picture minus 1
	161	ColumnWidthArray : 2 3 # Array containing ColumnWidth values in units of LCU (from left to right in picture)
	162	NumTileRowsMinus1 : 0 # Number of rows in a picture minus 1
	163	RowHeightArray : 2 # Array containing RowHeight values in units of LCU (from top to bottom in picture)
	164
	165	LFCrossTileBoundaryFlag : 1 # In-loop filtering is across or not across tile boundary.
	166	# 0:not across, 1: across
	167
	168	#============ WaveFront ================
	169	WaveFrontSynchro : 0 # 0: No WaveFront synchronisation (WaveFrontSubstreams must be 1 in this case).
	170	# >0: WaveFront synchronises with the LCU above and to the right by this many LCUs.
	171
	172	#=========== Quantization Matrix =================
	173	ScalingList : 0 # ScalingList 0 : off, 1 : default, 2 : file read
	174	ScalingListFile : scaling_list.txt # Scaling List file name. If file is not exist, use Default Matrix.
	175
	176	#============ Lossless ================
	177	TransquantBypassEnableFlag: 0 # Value of PPS flag.
[872]	178	CUTransquantBypassFlagForce: 0 # Constant lossless-value signaling per CU, if TransquantBypassEnableFlag is 1.
[608]	179
	180	#============ Rate Control ======================
	181	RateControl : 0 # Rate control: enable rate control
	182	TargetBitrate : 1000000 # Rate control: target bitrate, in bps
	183	KeepHierarchicalBit : 1 # Rate control: keep hierarchical bit allocation in rate control algorithm
	184	LCULevelRateControl : 1 # Rate control: 1: LCU level RC; 0: picture level RC
	185	RCLCUSeparateModel : 1 # Rate control: use LCU level separate R-lambda model
	186	InitialQP : 0 # Rate control: initial QP
	187	RCForceIntraQP : 0 # Rate control: force intra QP to be equal to initial QP
	188
	189	### DO NOT ADD ANYTHING BELOW THIS LINE ###
	190	### DO NOT DELETE THE EMPTY LINE BELOW ###

Note: See TracBrowser for help on using the repository browser.

Download in other formats: