Context navigation

source: 3DVCSoftware/branches/HTM-12.1-MV-draft-1/cfg/MV-HEVC/baseCfg_3view.cfg @ 1075

Visit:

Last change on this file since 1075 was 1066, checked in by tech, 10 years ago
Merged 12.0-dev1@1065.
File size: 17.1 KB

Line
1	#======== Legend for comments =====================
2	# (m) specification per layer/dimension/layerset possible
3	# (c) cyclic repetition of values, if not given for all layers/dimensions/layersets. (e.g. 5 layers and 1 2 3 -> 1 2 3 1 2 )
4
5	#======== File I/O =====================
6
7	InputFile_0 : newspapercc_4.yuv
8	InputFile_1 : newspapercc_2.yuv
9	InputFile_2 : newspapercc_6.yuv
10
11	BitstreamFile : stream.bit
12
13	ReconFile_0 : rec_4.yuv
14	ReconFile_1 : rec_2.yuv
15	ReconFile_2 : rec_6.yuv
16
17	NumberOfLayers : 3 # Number of layers
18
19	#======== VPS ============================
20	ScalabilityMask : 2 # Scalability Mask ( Scalability Mask: 2: Multiview, 8: Auxiliary, 10: Multiview + Auxiliary )
21	DimensionIdLen : 3 # Number of bits to store Ids, per scalability dimension, (m)
22	ViewOrderIndex : 0 1 2 # ViewOrderIndex, per layer (m)
23	LayerIdInNuh : 0 # Layer Id in NAL unit header, (0: no explicit signalling, otherwise per layer ) (m)
24	SplittingFlag : 0 # Splitting Flag
25	ViewId : 1 0 2 # ViewId, per ViewOrderIndex (m)
26
27	#======== VPS / Layer sets ================
28	VpsNumLayerSets : 4 # Number of layer sets
29	LayerIdsInSet_0 : 0 # Indices in VPS of layers in layer set 0
30	LayerIdsInSet_1 : 0 1 # Indices in VPS of layers in layer set 1
31	LayerIdsInSet_2 : 0 2 # Indices in VPS of layers in layer set 2
32	LayerIdsInSet_3 : 0 1 2 # Indices in VPS of layers in layer set 3
33
34	#======== VPS / Output layer sets ================
35	DefaultTargetOutputLayerIdc : 0 # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
36
37	OutputLayerSetIdx : 1 2 # Indices of layer sets used to derive additional output layer sets
38	LayerIdsInAddOutputLayerSet_0 : 1 # Indices in VPS of output layers in additional output layer set 0
39	LayerIdsInAddOutputLayerSet_1 : 2 # Indices in VPS of output layers in additional output layer set 1
40
41	#======== VPS / PTLI ================
42	Profile : main main multiview-main # Profile indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
43	Level : none none none # Level indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
44	Tier : main main main # Tier indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
45	InblFlag : 0 0 0 # Inbl indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
46
47	ProfileTierLevelIdx_0 : 1 # VpsProfileTierLevel indices of layers in output layer set 0 (m) (should be -1, when layer is not necessary)
48	ProfileTierLevelIdx_1 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 1 (m) (should be -1, when layer is not necessary)
49	ProfileTierLevelIdx_2 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 2 (m) (should be -1, when layer is not necessary)
50	ProfileTierLevelIdx_3 : 1 2 2 # VpsProfileTierLevel indices of layers in output layer set 3 (m) (should be -1, when layer is not necessary)
51	ProfileTierLevelIdx_4 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 4 (m) (should be -1, when layer is not necessary)
52	ProfileTierLevelIdx_5 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 5 (m) (should be -1, when layer is not necessary)
53
54	#======== VPS / Dependencies ================
55	DirectRefLayers_1 : 0 # Indices in VPS of direct reference layers
56	DirectRefLayers_2 : 0 # Indices in VPS of direct reference layers
57	DirectRefLayers_3 : # Indices in VPS of direct reference layers
58	DirectRefLayers_4 : # Indices in VPS of direct reference layers
59	DirectRefLayers_5 : # Indices in VPS of direct reference layers
60
61	DependencyTypes_1 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
62	DependencyTypes_2 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
63	DependencyTypes_3 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
64	DependencyTypes_4 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
65	DependencyTypes_5 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
66
67	#======== Unit definition ================
68	MaxCUWidth : 64 # Maximum coding unit width in pixel
69	MaxCUHeight : 64 # Maximum coding unit height in pixel
70	MaxPartitionDepth : 4 # Maximum coding unit depth
71	QuadtreeTULog2MaxSize : 5 # Log2 of maximum transform size for
72	# quadtree-based TU coding (2...6)
73	QuadtreeTULog2MinSize : 2 # Log2 of minimum transform size for
74	# quadtree-based TU coding (2...6)
75	QuadtreeTUMaxDepthInter : 3
76	QuadtreeTUMaxDepthIntra : 3
77
78	#======== Coding Structure =============
79	IntraPeriod : 24 # Period of I-Frame ( -1 = only first)
80	DecodingRefreshType : 1 # Random Accesss 0:none, 1:CDR, 2:IDR
81	GOPSize : 8 # GOP Size (number of B slice = GOPSize-1)
82
83	# QPfactor betaOffsetDiv2 #ref_pics_active reference pictures deltaRPS reference idcs ilPredLayerIdc refLayerPicPosIl_L1
84	# Type POC QPoffset tcOffsetDiv2 temporal_id #ref_pics predict #ref_idcs #ActiveRefLayerPics refLayerPicPosIl_L0
85
86	Frame1: B 8 1 0.442 0 0 0 4 4 -8 -10 -12 -16 0 0
87	Frame2: B 4 2 0.3536 0 0 0 2 3 -4 -6 4 1 4 5 1 1 0 0 1 0
88	Frame3: B 2 3 0.3536 0 0 0 2 4 -2 -4 2 6 1 2 4 1 1 1 1 0
89	Frame4: B 1 4 0.68 0 0 0 2 4 -1 1 3 7 1 1 5 1 0 1 1 1 0
90	Frame5: B 3 4 0.68 0 0 0 2 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 0
91	Frame6: B 6 3 0.3536 0 0 0 2 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 0
92	Frame7: B 5 4 0.68 0 0 0 2 4 -1 -5 1 3 1 1 5 1 0 1 1 1 0
93	Frame8: B 7 4 0.68 0 0 0 2 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 0
94
95	FrameI_l1: P 0 3 0.442 0 0 0 1 0 0 1 0 0 -1
96	Frame1_l1: B 8 4 0.442 0 0 0 4 4 -8 -10 -12 -16 0 1 0 1 -1
97	Frame2_l1: B 4 5 0.3536 0 0 0 3 3 -4 -6 4 1 4 5 1 1 0 0 1 1 0 1 -1
98	Frame3_l1: B 2 6 0.3536 0 0 0 3 4 -2 -4 2 6 1 2 4 1 1 1 1 1 0 1 -1
99	Frame4_l1: B 1 7 0.68 0 0 0 3 4 -1 1 3 7 1 1 5 1 0 1 1 1 1 0 1 -1
100	Frame5_l1: B 3 7 0.68 0 0 0 3 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 1 0 2 -1
101	Frame6_l1: B 6 6 0.3536 0 0 0 3 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 1 0 2 -1
102	Frame7_l1: B 5 7 0.68 0 0 0 3 4 -1 -5 1 3 1 1 5 1 0 1 1 1 1 0 2 -1
103	Frame8_l1: B 7 7 0.68 0 0 0 3 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 1 0 2 -1
104
105	FrameI_l2: P 0 3 0.442 0 0 0 1 0 0 1 0 0 -1
106	Frame1_l2: B 8 4 0.442 0 0 0 4 4 -8 -10 -12 -16 0 1 0 1 -1
107	Frame2_l2: B 4 5 0.3536 0 0 0 3 3 -4 -6 4 1 4 5 1 1 0 0 1 1 0 1 -1
108	Frame3_l2: B 2 6 0.3536 0 0 0 3 4 -2 -4 2 6 1 2 4 1 1 1 1 1 0 1 -1
109	Frame4_l2: B 1 7 0.68 0 0 0 3 4 -1 1 3 7 1 1 5 1 0 1 1 1 1 0 1 -1
110	Frame5_l2: B 3 7 0.68 0 0 0 3 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 1 0 2 -1
111	Frame6_l2: B 6 6 0.3536 0 0 0 3 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 1 0 2 -1
112	Frame7_l2: B 5 7 0.68 0 0 0 3 4 -1 -5 1 3 1 1 5 1 0 1 1 1 1 0 2 -1
113	Frame8_l2: B 7 7 0.68 0 0 0 3 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 1 0 2 -1
114
115	#=========== Motion Search =============
116	FastSearch : 1 # 0:Full search 1:TZ search
117	SearchRange : 64 # (0: Search range is a Full frame)
118	BipredSearchRange : 4 # Search range for bi-prediction refinement
119	HadamardME : 1 # Use of hadamard measure for fractional ME
120	FEN : 1 # Fast encoder decision
121	FDM : 1 # Fast Decision for Merge RD cost
122
123	#======== Quantization =============
124
125	MaxDeltaQP : 0 # CU-based multi-QP optimization
126	MaxCuDQPDepth : 0 # Max depth of a minimum CuDQP for sub-LCU-level delta QP
127	DeltaQpRD : 0 # Slice-based multi-QP optimization
128	RDOQ : 1 # RDOQ
129	RDOQTS : 1 # RDOQ for transform skip
130
131	#=========== Deblock Filter ============
132	DeblockingFilterControlPresent: 1 # Dbl control params present (0=not present, 1=present) (mc)
133	LoopFilterOffsetInPPS : 0 # Dbl params: 0=varying params in SliceHeader, param = base_param + GOP_offset_param; 1=constant params in PPS, param = base_param)
134	LoopFilterDisable : 0 # Disable deblocking filter (0=Filter, 1=No Filter) (mc)
135	LoopFilterBetaOffset_div2 : 0 # base_param: -6 ~ 6
136	LoopFilterTcOffset_div2 : 0 # base_param: -6 ~ 6
137	DeblockingFilterMetric : 0 # blockiness metric (automatically configures deblocking parameters in bitstream)
138
139	#=========== Misc. ============
140	InternalBitDepth : 8 # codec operating bit-depth
141
142	#=========== Coding Tools =================
143	SAO : 1 # Sample adaptive offset (0: OFF, 1: ON) (mc)
144	AMP : 1 # Asymmetric motion partitions (0: OFF, 1: ON)
145	TransformSkip : 1 # Transform skipping (0: OFF, 1: ON)
146	TransformSkipFast : 1 # Fast Transform skipping (0: OFF, 1: ON)
147	SAOLcuBoundary : 0 # SAOLcuBoundary using non-deblocked pixels (0: OFF, 1: ON)
148
149	#============ Slices ================
150	SliceMode : 0 # 0: Disable all slice options.
151	# 1: Enforce maximum number of LCU in an slice,
152	# 2: Enforce maximum number of bytes in an 'slice'
153	# 3: Enforce maximum number of tiles in a slice
154	SliceArgument : 1500 # Argument for 'SliceMode'.
155	# If SliceMode==1 it represents max. SliceGranularity-sized blocks per slice.
156	# If SliceMode==2 it represents max. bytes per slice.
157	# If SliceMode==3 it represents max. tiles per slice.
158
159	LFCrossSliceBoundaryFlag : 1 # In-loop filtering, including ALF and DB, is across or not across slice boundary.
160	# 0:not across, 1: across
161
162	#============ PCM ================
163	PCMEnabledFlag : 0 # 0: No PCM mode
164	PCMLog2MaxSize : 5 # Log2 of maximum PCM block size.
165	PCMLog2MinSize : 3 # Log2 of minimum PCM block size.
166	PCMInputBitDepthFlag : 1 # 0: PCM bit-depth is internal bit-depth. 1: PCM bit-depth is input bit-depth.
167	PCMFilterDisableFlag : 0 # 0: Enable loop filtering on I_PCM samples. 1: Disable loop filtering on I_PCM samples.
168
169	#============ Tiles ================
170	UniformSpacingIdc : 0 # 0: the column boundaries are indicated by ColumnWidth array, the row boundaries are indicated by RowHeight array
171	# 1: the column and row boundaries are distributed uniformly
172	NumTileColumnsMinus1 : 0 # Number of columns in a picture minus 1
173	ColumnWidthArray : 2 3 # Array containing ColumnWidth values in units of LCU (from left to right in picture)
174	NumTileRowsMinus1 : 0 # Number of rows in a picture minus 1
175	RowHeightArray : 2 # Array containing RowHeight values in units of LCU (from top to bottom in picture)
176
177	LFCrossTileBoundaryFlag : 1 # In-loop filtering is across or not across tile boundary.
178	# 0:not across, 1: across
179
180	#============ WaveFront ================
181	WaveFrontSynchro : 0 # 0: No WaveFront synchronisation (WaveFrontSubstreams must be 1 in this case).
182	# >0: WaveFront synchronises with the LCU above and to the right by this many LCUs.
183
184	#=========== Quantization Matrix =================
185	ScalingList : 0 # ScalingList 0 : off, 1 : default, 2 : file read
186	ScalingListFile : scaling_list.txt # Scaling List file name. If file is not exist, use Default Matrix.
187
188	#============ Lossless ================
189	TransquantBypassEnableFlag: 0 # Value of PPS flag.
190	CUTransquantBypassFlagForce: 0 # Constant lossless-value signaling per CU, if TransquantBypassEnableFlag is 1.
191
192	#============ Rate Control ======================
193	RateControl : 0 # Rate control: enable rate control
194	TargetBitrate : 1000000 # Rate control: target bitrate, in bps
195	KeepHierarchicalBit : 1 # Rate control: keep hierarchical bit allocation in rate control algorithm
196	LCULevelRateControl : 1 # Rate control: 1: LCU level RC; 0: picture level RC
197	RCLCUSeparateModel : 1 # Rate control: use LCU level separate R-lambda model
198	InitialQP : 0 # Rate control: initial QP
199	RCForceIntraQP : 0 # Rate control: force intra QP to be equal to initial QP
200
201	### DO NOT ADD ANYTHING BELOW THIS LINE ###
202	### DO NOT DELETE THE EMPTY LINE BELOW ###

Note: See TracBrowser for help on using the repository browser.

Download in other formats: