Context navigation

TAppEncCfg.h @ 854

Visit:

Last change on this file since 854 was 854, checked in by tech, 10 years ago

Integrated following MV-HEVC HLS 7 items:

H_MV_HLS7_GEN Stub for further integrations (not tested)
H_MV_HLS_7_OUTPUT_LAYERS_5_10_22_27 Output layer sets, various

(VPS/P0300/alt output layer flag) #27 Change alt output layer flag to be signalled within the loop of output layer sets, from JCTVC-P0300-v2. Decision: Adopt.
(VPS/P0156/Num of output_layer_flag) #10 Proposal 3: The output_layer_flag[ i ][ j ] is signalled for j equal to 0 to NumLayersInIdList[ lsIdx ] inclusive. It was remarked that we might be able to just assume that the top layer is always output; however, this was not entirely clear , so the safe thing to do may be to also send the flag for this layer.
(VPS/P0295/Default output layer sets) #5 Discussion from (P0110). Decision: Three-state approach (text in P0295, decoder shall allow 3 to be present and shall treat 3 the same as the value 2).

H_MV_HLS_7_HRD_P0156_7 (HRD/P0156/MaxSubLayersInLayerSetMinus1) #7 Proposal 1: signal, in the VPS extension, the DPB parameters for an output layer set for sub-DPBs only up to the maximum temporal sub-layers in the corresponding layer set
H_MV_HLS_7_VPS_P0048_14 (VPS/P0048/profile_ref_minus1 rem) #14 Remove profile_ref_minus1 from the VPS extension, from JCTVC-P0048
H_MV_HLS_7_VPS_P0076_15 (VPS/P0076/video signal info move) #15 Move video signal information syntax structure earlier in the VPS VUI.
H_MV_HLS_7_SPS_P0155_16_32 (SPS/P0155/sps_sub_layer_ordering_info) #16, #32 Not signal the sps_max_num_reorder_pics[], sps_max_latency_increase_plus1[], and sps_max_dec_pic_buffering_minus1[] syntax elements in the SPS when nuh_layer_id > 0.
H_MV_HLS_7_GEN_P0166_PPS_EXTENSION (GEN/P0166/pps_extension) #17 Add PPS extension type flags for conditional presence of syntax extensions per extension type, aligned with the SPS extension type flags, from JCTVC-P0166. Further align the SPS extension type flags syntax between RExt and MV-HEVC/SHVC
H_MV_HLS_7_FIX_SET_DPB_SIZE Fix derivation dpb size parameters
H_MV_HLS_7_RESERVED_FLAGS Added flags

(SPS/P0312/SHVC reserved flag) The flag will be used for the syntax vert_phase_position_enable_flag in SHVC draft
(VPS/O0215/SHVC reserved flag): this flag will be used for the syntax cross_layer_phase_alignment_flag in SHVC draft.
(VPS VUI/O0199,P0312/SHVC reserved flags) the 3 reserved bits will be used for the syntaxes single_layer_for_non_irap_flag, higher_layer_irap_skip_flag and vert_phase_position_not_in_use_flag in SHVC draft.

H_MV_FIX_VPS_LAYER_ID_NOT_EQUAL_ZERO Discard VPS with nuh_layer_Id > 0
H_MV_HLS_7_MISC_P0130_EOS (MISC/P0130/EOS NAL layer id) #19 Require that end of bitstream NAL unit shall have nuh_layer_id equal to 0, from JCTVC-P0130. Decoders shall allow an end of bitstream NAL unit with nuh_layer_id > 0 to be present, and shall ignore the NAL unit.
H_MV_HLS_7_MISC_P0182_13 (MISC/P0182/BL PS Compatibility flag) #13 Define the flag (in VPS VUI) with the proposed semantics, without specifying an associated extraction process. Editors to select the position in the VPS VUI.
H_MV_HLS_7_MISC_P0068_21 (MISC/P0068/all irap idr flag) #21 Add flag in VUI to indicate that all IRAP pictures are IDRs and that all layer pictures in an AU are IDR aligned, from JCTVC-P0068 proposal 1.
H_MV_HLS_7_FIX_INFER_CROSS_LAYER_IRAP_ALIGNED_FLAG Fix inference of cross_layer_irap_aligned_flag
H_MV_HLS_7_MISC_P0079_18 (MISC/P0079/NumActiveRefLayerPics) #18 Modification of derivation of variable NumActiveRefLayerPics.

Property svn:eol-style set to native

File size: 31.0 KB

Line
1	/* The copyright in this software is being made available under the BSD
2	* License, included below. This software may be subject to other third party
3	* and contributor rights, including patent rights, and no such rights are
4	* granted under this license.
5	*
6	* Copyright (c) 2010-2014, ITU/ISO/IEC
7	* All rights reserved.
8	*
9	* Redistribution and use in source and binary forms, with or without
10	* modification, are permitted provided that the following conditions are met:
11	*
12	* * Redistributions of source code must retain the above copyright notice,
13	* this list of conditions and the following disclaimer.
14	* * Redistributions in binary form must reproduce the above copyright notice,
15	* this list of conditions and the following disclaimer in the documentation
16	* and/or other materials provided with the distribution.
17	* * Neither the name of the ITU/ISO/IEC nor the names of its contributors may
18	* be used to endorse or promote products derived from this software without
19	* specific prior written permission.
20	*
21	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
22	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS
25	* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
31	* THE POSSIBILITY OF SUCH DAMAGE.
32	*/
33
34	/** \file TAppEncCfg.h
35	\brief Handle encoder configuration parameters (header)
36	*/
37
38	#ifndef __TAPPENCCFG__
39	#define __TAPPENCCFG__
40
41	#include "TLibCommon/CommonDef.h"
42
43	#include "TLibEncoder/TEncCfg.h"
44	#include <sstream>
45	#if H_3D
46	#include "TAppCommon/TAppComCamPara.h"
47	#include "TLibRenderer/TRenModel.h"
48	#include "TLibRenderer/TRenModSetupStrParser.h"
49	#endif
50	//! \ingroup TAppEncoder
51	//! \{
52
53	// ====================================================================================================================
54	// Class definition
55	// ====================================================================================================================
56
57	/// encoder configuration class
58	class TAppEncCfg
59	{
60	protected:
61	// file I/O
62	#if H_MV
63	std::vector<char*> m_pchInputFileList; ///< source file names
64	#else
65	Char* m_pchInputFile; ///< source file name
66	#endif
67	Char* m_pchBitstreamFile; ///< output bitstream file
68	#if H_MV
69	std::vector<char*> m_pchReconFileList; ///< output reconstruction file names
70	Int m_numberOfLayers; ///< number of Layers to Encode
71	Int m_iNumberOfViews; ///< number of Layers that are views
72	#else
73	Char* m_pchReconFile; ///< output reconstruction file
74	#endif
75	#if H_MV
76	// VPS specification
77	std::vector< std::vector<Int> > m_dimIds; ///< dimension ids ( pointers to m_viewId and m_depthFlag
78	std::vector<Int> m_viewId; ///< view id
79	std::vector<Int> m_viewOrderIndex; ///< view order index
80	#if H_3D
81	std::vector<Int> m_depthFlag; ///< depth flag
82	#endif
83	std::vector<Int> m_layerIdInNuh; ///< layer Id in Nuh for each layer
84	Bool m_splittingFlag; ///< Splitting Flag
85	Int m_scalabilityMask; ///< Mask indicating scalabilities, 1: texture; 3: texture + depth
86	std::vector<Int> m_dimensionIdLen; ///< Length of scalability dimension s
87
88	// layer sets
89	Int m_vpsNumLayerSets; ///< Number of layer sets
90	std::vector< std::vector<Int> > m_layerIdsInSets; ///< LayerIds in vps of layer set
91	#if H_MV_HLS_7_OUTPUT_LAYERS_5_10_22_27
92	Int m_defaultTargetOutputLayerIdc; ///< Specifies output layers of layer sets, 0: output all layers, 1: output highest layers, 2: specified by LayerIdsInDefOuputLayerSet
93	#else
94	Int m_defaultOneTargetOutputLayerIdc; ///< Output highest layer of layer sets by default when equal to 1
95	#endif
96	std::vector<Int> m_outputLayerSetIdx; ///< Indices of layer sets used as additional output layer sets
97	std::vector< std::vector<Int> > m_layerIdsInAddOutputLayerSet; ///< LayerIds in vps of additional output layers
98	#if H_MV_HLS_7_OUTPUT_LAYERS_5_10_22_27
99	std::vector< std::vector<Int> > m_layerIdsInDefOutputLayerSet; ///< Indices in vps of output layers in layer sets
100	#endif
101	std::vector<Int> m_profileLevelTierIdx; ///< Indices of of profile level tier
102
103	// Dependencies
104	std::vector< std::vector<Int> > m_directRefLayers; ///< LayerIds of direct reference layers
105	std::vector< std::vector<Int> > m_dependencyTypes; ///< Dependency types of direct reference layers
106
107	// DBP Size
108	#if !H_MV_HLS_7_FIX_SET_DPB_SIZE
109	Bool m_subLayerFlagInfoPresentFlag;
110	#endif
111
112	// VPS VUI
113	Bool m_vpsVuiPresentFlag;
114	Bool m_crossLayerPicTypeAlignedFlag;
115	Bool m_crossLayerIrapAlignedFlag;
116	#if H_MV_HLS_7_MISC_P0068_21
117	Bool m_allLayersIdrAlignedFlag;
118	#endif
119	Bool m_bitRatePresentVpsFlag;
120	Bool m_picRatePresentVpsFlag;
121	std::vector< std::vector<Bool > > m_bitRatePresentFlag;
122	std::vector< std::vector<Bool > > m_picRatePresentFlag;
123	std::vector< std::vector<Int > > m_avgBitRate;
124	std::vector< std::vector<Int > > m_maxBitRate;
125	std::vector< std::vector<Int > > m_constantPicRateIdc;
126	std::vector< std::vector<Int > > m_avgPicRate;
127	Bool m_tilesNotInUseFlag;
128	std::vector< Bool > m_tilesInUseFlag;
129	std::vector< Bool > m_loopFilterNotAcrossTilesFlag;
130	Bool m_wppNotInUseFlag;
131	std::vector< Bool > m_wppInUseFlag;
132
133	std::vector< std::vector<Bool > > m_tileBoundariesAlignedFlag;
134	Bool m_ilpRestrictedRefLayersFlag;
135	std::vector< std::vector<Int > > m_minSpatialSegmentOffsetPlus1;
136	std::vector< std::vector<Bool > > m_ctuBasedOffsetEnabledFlag;
137	std::vector< std::vector<Int > > m_minHorizontalCtuOffsetPlus1;
138
139	#if H_3D_IV_MERGE
140	vector<Bool> m_ivMvPredFlag; ///< Interview motion vector prediction
141	#if H_3D_SPIVMP
142	Int m_iSubPULog2Size;
143	#endif
144	#endif
145	#if QC_SPIVMP_MPI_G0119
146	Int m_iSubPUMPILog2Size;
147	#endif
148	#if H_3D_ARP /// < flag and number of weighting factors in ARP
149	UInt m_uiUseAdvResPred;
150	UInt m_uiARPStepNum;
151	#endif
152	#if H_3D_IC
153	Bool m_abUseIC;
154	#endif
155	#if H_3D_NBDV_REF
156	Bool m_depthRefinementFlag;
157	#endif
158	#if H_3D_VSP
159	Bool m_viewSynthesisPredFlag;
160	#endif
161	#if H_3D
162	Bool m_ivMvScalingFlag;
163	#endif
164	#endif
165	Double m_adLambdaModifier[ MAX_TLAYER ]; ///< Lambda modifier array for each temporal layer
166	// source specification
167	Int m_iFrameRate; ///< source frame-rates (Hz)
168	UInt m_FrameSkip; ///< number of skipped frames from the beginning
169	Int m_iSourceWidth; ///< source width in pixel
170	Int m_iSourceHeight; ///< source height in pixel (when interlaced = field height)
171
172	Int m_iSourceHeightOrg; ///< original source height in pixel (when interlaced = frame height)
173
174	bool m_isField; ///< enable field coding
175	bool m_isTopFieldFirst;
176
177	Int m_conformanceMode;
178	Int m_confLeft;
179	Int m_confRight;
180	Int m_confTop;
181	Int m_confBottom;
182	Int m_framesToBeEncoded; ///< number of encoded frames
183	Int m_aiPad[2]; ///< number of padded pixels for width and height
184
185	// profile/level
186	Profile::Name m_profile;
187	Level::Tier m_levelTier;
188	Level::Name m_level;
189	Bool m_progressiveSourceFlag;
190	Bool m_interlacedSourceFlag;
191	Bool m_nonPackedConstraintFlag;
192	Bool m_frameOnlyConstraintFlag;
193
194	// coding structure
195	#if H_MV
196	std::vector<Int> m_iIntraPeriod; ///< period of I-slice (random access period)
197	#else
198	Int m_iIntraPeriod; ///< period of I-slice (random access period)
199	#endif
200	Int m_iDecodingRefreshType; ///< random access type
201	Int m_iGOPSize; ///< GOP size of hierarchical structure
202	#if H_MV
203	Int m_extraRPSsMvc[MAX_NUM_LAYERS]; ///< extra RPSs added to handle CRA for each layer
204	std::vector< GOPEntry* > m_GOPListMvc; ///< the coding structure entries from the config file for each layer
205	Int m_numReorderPicsMvc[MAX_NUM_LAYERS][MAX_TLAYER]; ///< total number of reorder pictures for each layer
206	Int m_maxDecPicBufferingMvc[MAX_NUM_LAYERS][MAX_TLAYER]; ///< total number of reference pictures needed for decoding for each layer
207	#else
208	Int m_extraRPSs; ///< extra RPSs added to handle CRA
209	GOPEntry m_GOPList[MAX_GOP]; ///< the coding structure entries from the config file
210	Int m_numReorderPics[MAX_TLAYER]; ///< total number of reorder pictures
211	Int m_maxDecPicBuffering[MAX_TLAYER]; ///< total number of pictures in the decoded picture buffer
212	#endif
213	Bool m_useTransformSkip; ///< flag for enabling intra transform skipping
214	Bool m_useTransformSkipFast; ///< flag for enabling fast intra transform skipping
215	Bool m_enableAMP;
216	// coding quality
217	#if H_MV
218	std::vector<Double> m_fQP; ///< QP value of key-picture (floating point) for each layer
219	std::vector<Int> m_iQP; ///< QP value of key-picture (integer) for each layer
220	#else
221	Double m_fQP; ///< QP value of key-picture (floating point)
222	Int m_iQP; ///< QP value of key-picture (integer)
223	#endif
224	Char* m_pchdQPFile; ///< QP offset for each slice (initialized from external file)
225	#if H_MV
226	std::vector<Int*> m_aidQP; ///< array of slice QP values for each layer
227	#else
228	Int* m_aidQP; ///< array of slice QP values
229	#endif
230	Int m_iMaxDeltaQP; ///< max. \|delta QP\|
231	UInt m_uiDeltaQpRD; ///< dQP range for multi-pass slice QP optimization
232	Int m_iMaxCuDQPDepth; ///< Max. depth for a minimum CuDQPSize (0:default)
233
234	Int m_cbQpOffset; ///< Chroma Cb QP Offset (0:default)
235	Int m_crQpOffset; ///< Chroma Cr QP Offset (0:default)
236
237	#if ADAPTIVE_QP_SELECTION
238	Bool m_bUseAdaptQpSelect;
239	#endif
240
241	Bool m_bUseAdaptiveQP; ///< Flag for enabling QP adaptation based on a psycho-visual model
242	Int m_iQPAdaptationRange; ///< dQP range by QP adaptation
243
244	#if H_MV
245	Int m_maxTempLayerMvc[MAX_NUM_LAYER_IDS]; ///< Max temporal layer for each layer
246	#else
247	Int m_maxTempLayer; ///< Max temporal layer
248	#endif
249
250	// coding unit (CU) definition
251	UInt m_uiMaxCUWidth; ///< max. CU width in pixel
252	UInt m_uiMaxCUHeight; ///< max. CU height in pixel
253	UInt m_uiMaxCUDepth; ///< max. CU depth
254
255	// transfom unit (TU) definition
256	UInt m_uiQuadtreeTULog2MaxSize;
257	UInt m_uiQuadtreeTULog2MinSize;
258
259	UInt m_uiQuadtreeTUMaxDepthInter;
260	UInt m_uiQuadtreeTUMaxDepthIntra;
261
262	// coding tools (bit-depth)
263	Int m_inputBitDepthY; ///< bit-depth of input file (luma component)
264	Int m_inputBitDepthC; ///< bit-depth of input file (chroma component)
265	Int m_outputBitDepthY; ///< bit-depth of output file (luma component)
266	Int m_outputBitDepthC; ///< bit-depth of output file (chroma component)
267	Int m_internalBitDepthY; ///< bit-depth codec operates at in luma (input/output files will be converted)
268	Int m_internalBitDepthC; ///< bit-depth codec operates at in chroma (input/output files will be converted)
269
270	// coding tools (PCM bit-depth)
271	Bool m_bPCMInputBitDepthFlag; ///< 0: PCM bit-depth is internal bit-depth. 1: PCM bit-depth is input bit-depth.
272
273	// coding tool (SAO)
274	#if H_MV
275	std::vector<Bool> m_bUseSAO;
276	#else
277	Bool m_bUseSAO;
278	#endif
279	Int m_maxNumOffsetsPerPic; ///< SAO maximun number of offset per picture
280	Bool m_saoLcuBoundary; ///< SAO parameter estimation using non-deblocked pixels for LCU bottom and right boundary areas
281	// coding tools (loop filter)
282	#if H_MV
283	std::vector<Bool> m_bLoopFilterDisable; ///< flag for using deblocking filter for each layer
284	#else
285	Bool m_bLoopFilterDisable; ///< flag for using deblocking filter
286	#endif
287	Bool m_loopFilterOffsetInPPS; ///< offset for deblocking filter in 0 = slice header, 1 = PPS
288	Int m_loopFilterBetaOffsetDiv2; ///< beta offset for deblocking filter
289	Int m_loopFilterTcOffsetDiv2; ///< tc offset for deblocking filter
290	Bool m_DeblockingFilterControlPresent; ///< deblocking filter control present flag in PPS
291	Bool m_DeblockingFilterMetric; ///< blockiness metric in encoder
292
293	// coding tools (PCM)
294	Bool m_usePCM; ///< flag for using IPCM
295	UInt m_pcmLog2MaxSize; ///< log2 of maximum PCM block size
296	UInt m_uiPCMLog2MinSize; ///< log2 of minimum PCM block size
297	Bool m_bPCMFilterDisableFlag; ///< PCM filter disable flag
298
299	// coding tools (encoder-only parameters)
300	Bool m_bUseASR; ///< flag for using adaptive motion search range
301	Bool m_bUseHADME; ///< flag for using HAD in sub-pel ME
302	Bool m_useRDOQ; ///< flag for using RD optimized quantization
303	Bool m_useRDOQTS; ///< flag for using RD optimized quantization for transform skip
304	Int m_rdPenalty; ///< RD-penalty for 32x32 TU for intra in non-intra slices (0: no RD-penalty, 1: RD-penalty, 2: maximum RD-penalty)
305	Int m_iFastSearch; ///< ME mode, 0 = full, 1 = diamond, 2 = PMVFAST
306	Int m_iSearchRange; ///< ME search range
307	Int m_bipredSearchRange; ///< ME search range for bipred refinement
308	Bool m_bUseFastEnc; ///< flag for using fast encoder setting
309	Bool m_bUseEarlyCU; ///< flag for using Early CU setting
310	Bool m_useFastDecisionForMerge; ///< flag for using Fast Decision Merge RD-Cost
311	Bool m_bUseCbfFastMode; ///< flag for using Cbf Fast PU Mode Decision
312	Bool m_useEarlySkipDetection; ///< flag for using Early SKIP Detection
313	Int m_sliceMode; ///< 0: no slice limits, 1 : max number of CTBs per slice, 2: max number of bytes per slice,
314	///< 3: max number of tiles per slice
315	Int m_sliceArgument; ///< argument according to selected slice mode
316	Int m_sliceSegmentMode; ///< 0: no slice segment limits, 1 : max number of CTBs per slice segment, 2: max number of bytes per slice segment,
317	///< 3: max number of tiles per slice segment
318	Int m_sliceSegmentArgument; ///< argument according to selected slice segment mode
319
320	Bool m_bLFCrossSliceBoundaryFlag; ///< 1: filter across slice boundaries 0: do not filter across slice boundaries
321	Bool m_bLFCrossTileBoundaryFlag; ///< 1: filter across tile boundaries 0: do not filter across tile boundaries
322	Int m_iUniformSpacingIdr;
323	Int m_iNumColumnsMinus1;
324	Char* m_pchColumnWidth;
325	Int m_iNumRowsMinus1;
326	Char* m_pchRowHeight;
327	UInt* m_pColumnWidth;
328	UInt* m_pRowHeight;
329	Int m_iWaveFrontSynchro; //< 0: no WPP. >= 1: WPP is enabled, the "Top right" from which inheritance occurs is this LCU offset in the line above the current.
330	Int m_iWaveFrontSubstreams; //< If iWaveFrontSynchro, this is the number of substreams per frame (dependent tiles) or per tile (independent tiles).
331
332	Bool m_bUseConstrainedIntraPred; ///< flag for using constrained intra prediction
333
334	Int m_decodedPictureHashSEIEnabled; ///< Checksum(3)/CRC(2)/MD5(1)/disable(0) acting on decoded picture hash SEI message
335	Int m_recoveryPointSEIEnabled;
336	Int m_bufferingPeriodSEIEnabled;
337	Int m_pictureTimingSEIEnabled;
338	Bool m_toneMappingInfoSEIEnabled;
339	Int m_toneMapId;
340	Bool m_toneMapCancelFlag;
341	Bool m_toneMapPersistenceFlag;
342	Int m_toneMapCodedDataBitDepth;
343	Int m_toneMapTargetBitDepth;
344	Int m_toneMapModelId;
345	Int m_toneMapMinValue;
346	Int m_toneMapMaxValue;
347	Int m_sigmoidMidpoint;
348	Int m_sigmoidWidth;
349	Int m_numPivots;
350	Int m_cameraIsoSpeedIdc;
351	Int m_cameraIsoSpeedValue;
352	Int m_exposureCompensationValueSignFlag;
353	Int m_exposureCompensationValueNumerator;
354	Int m_exposureCompensationValueDenomIdc;
355	Int m_refScreenLuminanceWhite;
356	Int m_extendedRangeWhiteLevel;
357	Int m_nominalBlackLevelLumaCodeValue;
358	Int m_nominalWhiteLevelLumaCodeValue;
359	Int m_extendedWhiteLevelLumaCodeValue;
360	Int* m_startOfCodedInterval;
361	Int* m_codedPivotValue;
362	Int* m_targetPivotValue;
363	Int m_framePackingSEIEnabled;
364	Int m_framePackingSEIType;
365	Int m_framePackingSEIId;
366	Int m_framePackingSEIQuincunx;
367	Int m_framePackingSEIInterpretation;
368	Int m_displayOrientationSEIAngle;
369	Int m_temporalLevel0IndexSEIEnabled;
370	Int m_gradualDecodingRefreshInfoEnabled;
371	Int m_decodingUnitInfoSEIEnabled;
372	Int m_SOPDescriptionSEIEnabled;
373	Int m_scalableNestingSEIEnabled;
374	// weighted prediction
375	Bool m_useWeightedPred; ///< Use of weighted prediction in P slices
376	Bool m_useWeightedBiPred; ///< Use of bi-directional weighted prediction in B slices
377
378	UInt m_log2ParallelMergeLevel; ///< Parallel merge estimation region
379	UInt m_maxNumMergeCand; ///< Max number of merge candidates
380
381	Int m_TMVPModeId;
382	Int m_signHideFlag;
383	Bool m_RCEnableRateControl; ///< enable rate control or not
384	Int m_RCTargetBitrate; ///< target bitrate when rate control is enabled
385	Int m_RCKeepHierarchicalBit; ///< 0: equal bit allocation; 1: fixed ratio bit allocation; 2: adaptive ratio bit allocation
386	Bool m_RCLCULevelRC; ///< true: LCU level rate control; false: picture level rate control
387	Bool m_RCUseLCUSeparateModel; ///< use separate R-lambda model at LCU level
388	Int m_RCInitialQP; ///< inital QP for rate control
389	Bool m_RCForceIntraQP; ///< force all intra picture to use initial QP or not
390
391	#if KWU_RC_VIEWRC_E0227
392	vector<Int> m_viewTargetBits;
393	Bool m_viewWiseRateCtrl; ///< Flag for using view-wise rate control
394	#endif
395	#if KWU_RC_MADPRED_E0227
396	UInt m_depthMADPred;
397	#endif
398	Int m_useScalingListId; ///< using quantization matrix
399	Char* m_scalingListFile; ///< quantization matrix file name
400
401	Bool m_TransquantBypassEnableFlag; ///< transquant_bypass_enable_flag setting in PPS.
402	Bool m_CUTransquantBypassFlagForce; ///< if transquant_bypass_enable_flag, then, if true, all CU transquant bypass flags will be set to true.
403
404	Bool m_recalculateQPAccordingToLambda; ///< recalculate QP value according to the lambda value
405	Bool m_useStrongIntraSmoothing; ///< enable strong intra smoothing for 32x32 blocks where the reference samples are flat
406	Int m_activeParameterSetsSEIEnabled;
407
408	Bool m_vuiParametersPresentFlag; ///< enable generation of VUI parameters
409	Bool m_aspectRatioInfoPresentFlag; ///< Signals whether aspect_ratio_idc is present
410	Int m_aspectRatioIdc; ///< aspect_ratio_idc
411	Int m_sarWidth; ///< horizontal size of the sample aspect ratio
412	Int m_sarHeight; ///< vertical size of the sample aspect ratio
413	Bool m_overscanInfoPresentFlag; ///< Signals whether overscan_appropriate_flag is present
414	Bool m_overscanAppropriateFlag; ///< Indicates whether conformant decoded pictures are suitable for display using overscan
415	Bool m_videoSignalTypePresentFlag; ///< Signals whether video_format, video_full_range_flag, and colour_description_present_flag are present
416	Int m_videoFormat; ///< Indicates representation of pictures
417	Bool m_videoFullRangeFlag; ///< Indicates the black level and range of luma and chroma signals
418	Bool m_colourDescriptionPresentFlag; ///< Signals whether colour_primaries, transfer_characteristics and matrix_coefficients are present
419	Int m_colourPrimaries; ///< Indicates chromaticity coordinates of the source primaries
420	Int m_transferCharacteristics; ///< Indicates the opto-electronic transfer characteristics of the source
421	Int m_matrixCoefficients; ///< Describes the matrix coefficients used in deriving luma and chroma from RGB primaries
422	Bool m_chromaLocInfoPresentFlag; ///< Signals whether chroma_sample_loc_type_top_field and chroma_sample_loc_type_bottom_field are present
423	Int m_chromaSampleLocTypeTopField; ///< Specifies the location of chroma samples for top field
424	Int m_chromaSampleLocTypeBottomField; ///< Specifies the location of chroma samples for bottom field
425	Bool m_neutralChromaIndicationFlag; ///< Indicates that the value of all decoded chroma samples is equal to 1<<(BitDepthCr-1)
426	Bool m_defaultDisplayWindowFlag; ///< Indicates the presence of the default window parameters
427	Int m_defDispWinLeftOffset; ///< Specifies the left offset from the conformance window of the default window
428	Int m_defDispWinRightOffset; ///< Specifies the right offset from the conformance window of the default window
429	Int m_defDispWinTopOffset; ///< Specifies the top offset from the conformance window of the default window
430	Int m_defDispWinBottomOffset; ///< Specifies the bottom offset from the conformance window of the default window
431	Bool m_frameFieldInfoPresentFlag; ///< Indicates that pic_struct values are present in picture timing SEI messages
432	Bool m_pocProportionalToTimingFlag; ///< Indicates that the POC value is proportional to the output time w.r.t. first picture in CVS
433	Int m_numTicksPocDiffOneMinus1; ///< Number of ticks minus 1 that for a POC difference of one
434	Bool m_bitstreamRestrictionFlag; ///< Signals whether bitstream restriction parameters are present
435	Bool m_tilesFixedStructureFlag; ///< Indicates that each active picture parameter set has the same values of the syntax elements related to tiles
436	Bool m_motionVectorsOverPicBoundariesFlag; ///< Indicates that no samples outside the picture boundaries are used for inter prediction
437	Int m_minSpatialSegmentationIdc; ///< Indicates the maximum size of the spatial segments in the pictures in the coded video sequence
438	Int m_maxBytesPerPicDenom; ///< Indicates a number of bytes not exceeded by the sum of the sizes of the VCL NAL units associated with any coded picture
439	Int m_maxBitsPerMinCuDenom; ///< Indicates an upper bound for the number of bits of coding_unit() data
440	Int m_log2MaxMvLengthHorizontal; ///< Indicate the maximum absolute value of a decoded horizontal MV component in quarter-pel luma units
441	Int m_log2MaxMvLengthVertical; ///< Indicate the maximum absolute value of a decoded vertical MV component in quarter-pel luma units
442
443	#if H_3D
444	// Camera parameters
445	Char* m_pchCameraParameterFile; ///< camera parameter file
446	Char* m_pchBaseViewCameraNumbers;
447	TAppComCamPara m_cCameraData;
448	Int m_iCodedCamParPrecision; ///< precision for coding of camera parameters
449	#if H_3D_VSO
450	Char* m_pchVSOConfig;
451	Bool m_bUseVSO; ///< flag for using View Synthesis Optimization
452	Bool m_bVSOLSTable; ///< Depth QP dependent Lagrange parameter optimization (m23714)
453	Bool m_bVSOEarlySkip; ///< Early skip of VSO computation (JCT3V-A0093 modification 4)
454
455	//// Used for development by GT, might be removed later
456	Double m_dLambdaScaleVSO; ///< Scaling factor for Lambda in VSO mode
457	Bool m_bForceLambdaScaleVSO; ///< Use Lambda Scale for depth even if VSO is turned off
458	Bool m_bAllowNegDist; ///< Allow negative distortion in VSO
459	UInt m_uiVSOMode; ///< Number of VSO Mode, 1 = , 2 = simple, org vs. ren, 3 = simple, ren vs. ren, 4 = full
460
461	// SAIT_VSO_EST_A0033
462	Bool m_bUseEstimatedVSD; ///< Flag for using model based VSD estimation instead of VSO for some encoder decisions (JCT3V-A0033 modification 3)
463
464	// LGE_WVSO_A0119
465	Bool m_bUseWVSO; ///< flag for using View Synthesis Optimization
466	Int m_iVSOWeight;
467	Int m_iVSDWeight;
468	Int m_iDWeight;
469
470	// Ren Model String
471	TRenModSetupStrParser m_cRenModStrParser;
472	#endif
473	#if H_3D_DIM
474	Bool m_useDMM; ///< flag for using DMM
475	Bool m_useSDC; ///< flag for using SDC
476	Bool m_useDLT; ///< flag for using DLT
477	#endif
478	#if H_3D_QTLPC
479	Bool m_bUseQTL; ///< flag for using depth QuadTree Limitation
480	Bool m_bUsePC; ///< flag for using Predictive Coding with QTL
481	#endif
482	#if H_3D_INTER_SDC
483	Bool m_bDepthInterSDCFlag; ///< flag for inter SDC of depth map coding
484	#endif
485	#if H_3D_DBBP
486	Bool m_bUseDBBP; ///< flag for depth-based block partitioning
487	#endif
488	#if H_3D_IV_MERGE
489	Bool m_bMPIFlag; ///< flag for MPI of depth map coding
490	#endif
491	#endif
492	// internal member functions
493	Void xSetGlobal (); ///< set global variables
494	Void xCheckParameter (); ///< check validity of configuration values
495	Void xPrintParameter (); ///< print configuration values
496	Void xPrintUsage (); ///< print usage
497	#if H_MV
498	template <typename T>
499	Void xResizeVector( std::vector<T> & rpcVector )
500	{
501	for( Int layer = 0; rpcVector.size() < m_numberOfLayers; layer++ )
502	{
503	assert( rpcVector.size() > 0 );
504	rpcVector.push_back( rpcVector[layer] );
505	}
506
507	for( ; rpcVector.size() > m_numberOfLayers; )
508	{
509	rpcVector.pop_back( );
510	}
511	}
512
513	template <typename T>
514	Void xPrintParaVector( std::string description, std::vector<T> & rpcVector )
515	{
516	Int iSpace = max(1, ENC_CFG_CONSOUT_SPACE - (Int) description.length() );
517
518	for ( Int i = 0; i < iSpace; i++ )
519	description.append( " " );
520
521	description.append( ":" );
522	printf( "%s", description.c_str() );
523
524	for(Int i=0;i<rpcVector.size();i++)
525	xPrintVectorElem( rpcVector[i] );
526
527	printf("\n");
528	}
529
530	Void xPrintVectorElem( UInt elem ) { printf(" %d" , elem );};
531	Void xPrintVectorElem( Int elem ) { printf(" %d" , elem );};
532
533	Void xPrintVectorElem( Double elem ) { printf(" %5.2f", elem );};
534	Void xPrintVectorElem( Bool elem ) { printf(" %d" , ( elem ? 1 : 0 ));};
535	#endif
536	#if H_MV
537	Int getGOPSize() { return m_iGOPSize; }
538	#endif
539	public:
540	TAppEncCfg();
541	virtual ~TAppEncCfg();
542
543	public:
544	Void create (); ///< create option handling class
545	Void destroy (); ///< destroy option handling class
546	Bool parseCfg ( Int argc, Char* argv[] ); ///< parse configuration file to fill member variables
547
548	};// END CLASS DEFINITION TAppEncCfg
549
550	//! \}
551
552	#endif // __TAPPENCCFG__
553

Note: See TracBrowser for help on using the repository browser.

JCT-3V 3D-HEVC

Context navigation

source: 3DVCSoftware/branches/HTM-10.0-dev0/source/App/TAppEncoder/TAppEncCfg.h @ 854

Download in other formats: