Index: branches/SHM-dev/cfg/encoder_intra_main.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_intra_main.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_intra_main.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main
+#Profile                      : main
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main        
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main
+#Profile for the enhancement layer
+Profile2                      : main
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/encoder_intra_main10.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_intra_main10.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_intra_main10.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main10
+#Profile                      : main10
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main10       
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main10
+#Profile for the enhancement layer
+Profile2                      : main10
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/encoder_lowdelay_P_main.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_lowdelay_P_main.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_lowdelay_P_main.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main
+#Profile                      : main
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main       
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main
+#Profile for the enhancement layer
+Profile2                      : main
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/encoder_lowdelay_P_main10.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_lowdelay_P_main10.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_lowdelay_P_main10.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main10
+#Profile                      : main10
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main10       
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main10
+#Profile for the enhancement layer
+Profile2                      : main10
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/encoder_lowdelay_main.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_lowdelay_main.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_lowdelay_main.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main
+#Profile                       : main
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main        
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main
+#Profile for the enhancement layer
+Profile2                      : main
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/encoder_lowdelay_main10.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_lowdelay_main10.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_lowdelay_main10.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main10
+#Profile                      : main10
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main10
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main10
+#Profile for the enhancement layer
+Profile2                      : main10
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/encoder_randomaccess_main.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_randomaccess_main.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_randomaccess_main.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main
+#Profile                      : main
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main       
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main
+#Profile for the enhancement layer
+Profile2                      : main
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/encoder_randomaccess_main10.cfg
===================================================================
--- branches/SHM-dev/cfg/encoder_randomaccess_main10.cfg	(revision 911)
+++ branches/SHM-dev/cfg/encoder_randomaccess_main10.cfg	(revision 941)
@@ -4,5 +4,12 @@
 
 #======== Profile/Level ================
-Profile                       : main10
+#Profile                      : main10
+NumProfileTierLevel           : 3
+#Profile for the whole bitstream
+Profile0                      : main10       
+#Profile for the base layer --- this will be ignored when BL is not HEVC
+Profile1                      : main10
+#Profile for the enhancement layer
+Profile2                      : main10
 
 #======== Unit definition ================
Index: branches/SHM-dev/cfg/layers.cfg
===================================================================
--- branches/SHM-dev/cfg/layers.cfg	(revision 911)
+++ branches/SHM-dev/cfg/layers.cfg	(revision 941)
@@ -59,2 +59,3 @@
 # ListOfOutputLayers0 need not be specified
 ListOfOutputLayers1	          : 1
+ListOfProfileTierLevelOls1    : 1 2
Index: branches/SHM-dev/cfg/layers_avcbase.cfg
===================================================================
--- branches/SHM-dev/cfg/layers_avcbase.cfg	(revision 911)
+++ branches/SHM-dev/cfg/layers_avcbase.cfg	(revision 941)
@@ -54,3 +54,5 @@
 NumLayersInOutputLayerSet     : 1           # The number of layers in the 0-th OLS should not be specified, 
 # ListOfOutputLayers0 need not be specified
-ListOfOutputLayers1	          : 1
+ListOfOutputLayers1	      : 1
+ListOfProfileTierLevelOls1    : 1 2
+
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-1.5x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 600         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BQTerrace_1920x1080_60.yuv
@@ -23,2 +30,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-2x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 600         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BQTerrace_1920x1080_60.yuv
@@ -29,3 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
-
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/BQTerrace-SNR.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 600         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BQTerrace_1920x1080_60.yuv
@@ -29,2 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-1.5x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 500         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BasketballDrive_1920x1080_50.yuv
@@ -23,2 +30,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-2x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 500         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BasketballDrive_1920x1080_50.yuv
@@ -29,3 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
-
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/BasketballDrive-SNR.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 500         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BasketballDrive_1920x1080_50.yuv
@@ -29,2 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-1.5x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 500         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Cactus_1920x1080_50.yuv
@@ -23,2 +30,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-2x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 500         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Cactus_1920x1080_50.yuv
@@ -29,3 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
-
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Cactus-SNR.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 500         # Number of frames to be coded
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Cactus_1920x1080_50.yuv
@@ -29,2 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-1.5x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 240         # Number of frames to be coded
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Kimono1_1920x1080_24.yuv
@@ -23,2 +30,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-2x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 240         # Number of frames to be coded
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : O:/Kimono1_1920x1080_24.yuv
@@ -29,2 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Kimono-SNR.cfg	(revision 941)
@@ -1,5 +1,12 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 240         # Number of frames to be coded
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 4
+#This is level of the enhancement layer
+Level2                         : 4
+
 
 #======== File I/O ===============
@@ -13,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Kimono1_1920x1080_24.yuv
@@ -29,2 +37,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-1.5x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 240         # Number of frames to be coded
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : ParkScene_1920x1080_24.yuv
@@ -23,2 +30,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-2x.cfg	(revision 941)
@@ -1,6 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 240         # Number of frames to be coded
-Level                         : 4
-
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 #======== File I/O ===============
 InputFile0                    : ParkScene_960x544_24_zerophase_0.9pi.yuv
@@ -13,4 +18,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : ParkScene_1920x1080_24.yuv
@@ -29,2 +35,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/ParkScene-SNR.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 240         # Number of frames to be coded
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 4
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : ParkScene_1920x1080_24.yuv
@@ -29,2 +36,3 @@
 ResamplePhaseSetPresentFlag1     : 0        # List of resample phase set present flags
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/PeopleOnStreet-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/PeopleOnStreet-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/PeopleOnStreet-2x.cfg	(revision 941)
@@ -1,6 +1,13 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 150         # Number of frames to be coded
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 5
 
+#======
 #======== File I/O ===============
 InputFile0                    : PeopleOnStreet_1280x800_30_crop_zerophase_0.9pi.yuv
@@ -13,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : PeopleOnStreet_2560x1600_30_crop.yuv
@@ -23,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/PeopleOnStreet-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/PeopleOnStreet-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/PeopleOnStreet-SNR.cfg	(revision 941)
@@ -1,6 +1,13 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 150         # Number of frames to be coded
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 5
+#This is level of the enhancement layer
+Level2                         : 5
 
+#======
 #======== File I/O ===============
 InputFile0                    : PeopleOnStreet_2560x1600_30_crop.yuv
@@ -13,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : PeopleOnStreet_2560x1600_30_crop.yuv
@@ -23,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Traffic-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Traffic-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Traffic-2x.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 150         # Number of frames to be coded
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 5
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Traffic_2560x1600_30_crop.yuv
@@ -23,2 +30,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc-avcbase/Traffic-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc-avcbase/Traffic-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc-avcbase/Traffic-SNR.cfg	(revision 941)
@@ -1,5 +1,11 @@
 FrameSkip                     : 0           # Number of frames to be skipped in input
 FramesToBeEncoded             : 150         # Number of frames to be coded
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 5
+#This is level of the enhancement layer
+Level2                         : 5
 
 #======== File I/O ===============
@@ -13,4 +19,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Traffic_2560x1600_30_crop.yuv
@@ -23,2 +30,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-1.5x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 600         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BQTerrace_1920x1080_60.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-2x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 600         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BQTerrace_1920x1080_60.yuv
@@ -24,4 +31,5 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
 
 #============= Reference location offset parameters ==================
Index: branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/BQTerrace-SNR.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 600         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BQTerrace_1920x1080_60.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-1.5x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 500         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BasketballDrive_1920x1080_50.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-2x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 500         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BasketballDrive_1920x1080_50.yuv
@@ -24,4 +31,5 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
 
 #============= Reference location offset parameters ==================
Index: branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/BasketballDrive-SNR.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 500         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BasketballDrive_1920x1080_50.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-Birthday-b10-1x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-Birthday-b10-1x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-Birthday-b10-1x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 10          # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_Birthday_1920x1080_60_10bit_zerophase_0.9pi.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-Birthday-b8-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-Birthday-b8-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-Birthday-b8-2x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 5.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 5.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 8           # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_Birthday_3840x2160_60_10bit.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 1           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart1-b10-1x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart1-b10-1x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart1-b10-1x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 10          # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_BirthdayFlashPart1_1920x1080_60_10bit_zerophase_0.9pi.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart1-b8-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart1-b8-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart1-b8-2x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 5.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 5.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 8           # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_BirthdayFlashPart1_3840x2160_60_10bit.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 1           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart2-b10-1x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart2-b10-1x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart2-b10-1x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 10          # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_BirthdayFlashPart2_1920x1080_60_10bit_zerophase_0.9pi.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart2-b8-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart2-b8-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-BirthdayFlashPart2-b8-2x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 5.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 5.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 8           # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_BirthdayFlashPart2_3840x2160_60_10bit.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 1           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-Parakeets-b10-1x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-Parakeets-b10-1x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-Parakeets-b10-1x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 250         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 10          # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_Parakeets_1920x1080_50_10bit_zerophase_0.9pi.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-Parakeets-b8-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-Parakeets-b8-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-Parakeets-b8-2x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 250         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 5.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 5.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 8           # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_Parakeets_3840x2160_50_10bit.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 1           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-TableCar-b10-1x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-TableCar-b10-1x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-TableCar-b10-1x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 10          # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_TableCar_1920x1080_60_10bit_zerophase_0.9pi.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/CGS-TableCar-b8-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/CGS-TableCar-b8-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/CGS-TableCar-b8-2x.cfg	(revision 941)
@@ -3,5 +3,11 @@
 FramesToBeEncoded             : 300         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 5.1
+#This is level of the base layer
+Level1                         : 4.1
+#This is level of the enhancement layer
+Level2                         : 5.1
 
 #======== File I/O ===============
@@ -16,4 +22,5 @@
 InternalBitDepth0             : 8           # codec operating bit-depth for layer 0
 RepFormatIdx0                 : 0           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex0                : 1 
 
 InputFile1                    : BT2020_TableCar_3840x2160_60_10bit.yuv
@@ -27,2 +34,3 @@
 InternalBitDepth1             : 10          # codec operating bit-depth for layer 1
 RepFormatIdx1                 : 1           # Index of corresponding rep_format() in the VPS
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/Cactus-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Cactus-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Cactus-1.5x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 500         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Cactus_1920x1080_50.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/Cactus-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Cactus-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Cactus-2x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 500         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Cactus_1920x1080_50.yuv
@@ -24,4 +31,5 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
 
 #============= Reference location offset parameters ==================
Index: branches/SHM-dev/cfg/per-sequence-svc/Cactus-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Cactus-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Cactus-SNR.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 500         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4.1
+#Level                         : 4.1
+#This is level of the whole bitstream
+Level0                         : 4.1
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4.1
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Cactus_1920x1080_50.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/Kimono-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Kimono-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Kimono-1.5x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 240         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Kimono1_1920x1080_24.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/Kimono-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Kimono-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Kimono-2x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 240         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Kimono1_1920x1080_24.yuv
@@ -24,4 +31,5 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
 
 #============= Reference location offset parameters ==================
Index: branches/SHM-dev/cfg/per-sequence-svc/Kimono-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Kimono-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Kimono-SNR.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 240         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 4
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Kimono1_1920x1080_24.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/ParkScene-1.5x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/ParkScene-1.5x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/ParkScene-1.5x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 240         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : ParkScene_1920x1080_24.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/ParkScene-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/ParkScene-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/ParkScene-2x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 240         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : ParkScene_1920x1080_24.yuv
@@ -24,4 +31,5 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
 
 #============= Reference location offset parameters ==================
Index: branches/SHM-dev/cfg/per-sequence-svc/ParkScene-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/ParkScene-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/ParkScene-SNR.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 240         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 4
+#Level                         : 4
+#This is level of the whole bitstream
+Level0                         : 4
+#This is level of the base layer
+Level1                         : 4
+#This is level of the enhancement layer
+Level2                         : 4
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : ParkScene_1920x1080_24.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/PeopleOnStreet-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/PeopleOnStreet-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/PeopleOnStreet-2x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 150         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 5
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : PeopleOnStreet_2560x1600_30_crop.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/PeopleOnStreet-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/PeopleOnStreet-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/PeopleOnStreet-SNR.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 150         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 5
+#This is level of the enhancement layer
+Level2                         : 5
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : PeopleOnStreet_2560x1600_30_crop.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/Traffic-2x.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Traffic-2x.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Traffic-2x.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 150         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 3.1
+#This is level of the enhancement layer
+Level2                         : 5
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Traffic_2560x1600_30_crop.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
Index: branches/SHM-dev/cfg/per-sequence-svc/Traffic-SNR.cfg
===================================================================
--- branches/SHM-dev/cfg/per-sequence-svc/Traffic-SNR.cfg	(revision 911)
+++ branches/SHM-dev/cfg/per-sequence-svc/Traffic-SNR.cfg	(revision 941)
@@ -2,5 +2,11 @@
 FramesToBeEncoded             : 150         # Number of frames to be coded
 PhaseAlignment                : 0           # Sample location alignment between layers (0: zero position aligned, 1: central position aligned)
-Level                         : 5
+#Level                         : 5
+#This is level of the whole bitstream
+Level0                         : 5
+#This is level of the base layer
+Level1                         : 5
+#This is level of the enhancement layer
+Level2                         : 5
 
 #======== File I/O ===============
@@ -14,4 +20,5 @@
 ConformanceMode0              : 1           # conformance mode
 QP0                           : 22
+LayerPTLIndex0                : 1 
 
 InputFile1                    : Traffic_2560x1600_30_crop.yuv
@@ -24,2 +31,3 @@
 ConformanceMode1              : 1           # conformance mode
 QP1                           : 20
+LayerPTLIndex1                : 2 
