Context navigation

TAppEncCfg.cpp @ 462

Visit:

Last change on this file since 462 was 269, checked in by seregin, 12 years ago
add config parameter for NumActiveRefLayers
File size: 101.6 KB

Rev	Line
[191]	1	/* The copyright in this software is being made available under the BSD
	2	* License, included below. This software may be subject to other third party
	3	* and contributor rights, including patent rights, and no such rights are
	4	* granted under this license.
	5	*
	6	* Copyright (c) 2010-2013, ITU/ISO/IEC
	7	* All rights reserved.
	8	*
	9	* Redistribution and use in source and binary forms, with or without
	10	* modification, are permitted provided that the following conditions are met:
	11	*
	12	* * Redistributions of source code must retain the above copyright notice,
	13	* this list of conditions and the following disclaimer.
	14	* * Redistributions in binary form must reproduce the above copyright notice,
	15	* this list of conditions and the following disclaimer in the documentation
	16	* and/or other materials provided with the distribution.
	17	* * Neither the name of the ITU/ISO/IEC nor the names of its contributors may
	18	* be used to endorse or promote products derived from this software without
	19	* specific prior written permission.
	20	*
	21	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	22	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	23	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	24	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS
	25	* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	26	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	27	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	28	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	29	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	30	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
	31	* THE POSSIBILITY OF SUCH DAMAGE.
	32	*/
	33
	34	/** \file TAppEncCfg.cpp
	35	\brief Handle encoder configuration parameters
	36	*/
	37
	38	#include <stdlib.h>
	39	#include <cassert>
	40	#include <cstring>
	41	#include <string>
	42	#include "TLibCommon/TComRom.h"
	43	#include "TAppEncCfg.h"
	44
	45	static istream& operator>>(istream &, Level::Name &);
	46	static istream& operator>>(istream &, Level::Tier &);
	47	static istream& operator>>(istream &, Profile::Name &);
	48
	49	#include "TAppCommon/program_options_lite.h"
	50	#include "TLibEncoder/TEncRateCtrl.h"
	51	#ifdef WIN32
	52	#define strdup _strdup
	53	#endif
	54
	55	using namespace std;
	56	namespace po = df::program_options_lite;
	57
	58	//! \ingroup TAppEncoder
	59	//! \{
	60
	61	// ====================================================================================================================
	62	// Constructor / destructor / initialization / destroy
	63	// ====================================================================================================================
	64
	65	#if SVC_EXTENSION
	66	TAppEncCfg::TAppEncCfg()
	67	: m_pBitstreamFile()
	68	#if AVC_BASE
	69	, m_avcBaseLayerFlag(0)
	70	#endif
	71	, m_pColumnWidth()
	72	, m_pRowHeight()
	73	, m_scalingListFile()
	74	#if REF_IDX_FRAMEWORK
	75	, m_elRapSliceBEnabled(0)
	76	#endif
	77	{
	78	for(UInt layer=0; layer<MAX_LAYERS; layer++)
	79	{
	80	m_acLayerCfg[layer].setAppEncCfg(this);
	81	}
[245]	82	memset( m_scalabilityMask, 0, sizeof(m_scalabilityMask) );
[191]	83	}
	84	#else
	85	TAppEncCfg::TAppEncCfg()
	86	: m_pchInputFile()
	87	, m_pchBitstreamFile()
	88	, m_pchReconFile()
	89	, m_pchdQPFile()
	90	, m_pColumnWidth()
	91	, m_pRowHeight()
	92	, m_scalingListFile()
	93	{
	94	m_aidQP = NULL;
	95	#if J0149_TONE_MAPPING_SEI
	96	m_startOfCodedInterval = NULL;
	97	m_codedPivotValue = NULL;
	98	m_targetPivotValue = NULL;
	99	#endif
	100	}
	101	#endif
	102
	103	TAppEncCfg::~TAppEncCfg()
	104	{
	105	#if SVC_EXTENSION
	106	free(m_pBitstreamFile);
	107	#else
	108	free(m_pchBitstreamFile);
	109	if ( m_aidQP )
	110	{
	111	delete[] m_aidQP;
	112	}
	113	#if J0149_TONE_MAPPING_SEI
	114	if ( m_startOfCodedInterval )
	115	{
	116	delete[] m_startOfCodedInterval;
	117	m_startOfCodedInterval = NULL;
	118	}
	119	if ( m_codedPivotValue )
	120	{
	121	delete[] m_codedPivotValue;
	122	m_codedPivotValue = NULL;
	123	}
	124	if ( m_targetPivotValue )
	125	{
	126	delete[] m_targetPivotValue;
	127	m_targetPivotValue = NULL;
	128	}
	129	#endif
	130	free(m_pchInputFile);
	131	#endif
	132	#if !SVC_EXTENSION
	133	free(m_pchReconFile);
	134	free(m_pchdQPFile);
	135	#endif
	136	free(m_pColumnWidth);
	137	free(m_pRowHeight);
	138	free(m_scalingListFile);
	139	}
	140
	141	Void TAppEncCfg::create()
	142	{
	143	}
	144
	145	Void TAppEncCfg::destroy()
	146	{
	147	#if VPS_EXTN_DIRECT_REF_LAYERS
	148	for(Int layer = 0; layer < MAX_LAYERS; layer++)
	149	{
	150	if( m_acLayerCfg[layer].m_numDirectRefLayers > 0 )
	151	{
	152	delete [] m_acLayerCfg[layer].m_refLayerIds;
	153	}
	154	}
[269]	155
	156	for(Int layer = 0; layer < MAX_LAYERS; layer++)
	157	{
	158	if( m_acLayerCfg[layer].m_numActiveRefLayers > 0 )
	159	{
	160	delete [] m_acLayerCfg[layer].m_predLayerIds;
	161	}
	162	}
[191]	163	#endif
	164	}
	165
	166	std::istringstream &operator>>(std::istringstream &in, GOPEntry &entry) //input
	167	{
	168	in>>entry.m_sliceType;
	169	in>>entry.m_POC;
	170	in>>entry.m_QPOffset;
	171	in>>entry.m_QPFactor;
	172	in>>entry.m_tcOffsetDiv2;
	173	in>>entry.m_betaOffsetDiv2;
	174	in>>entry.m_temporalId;
	175	in>>entry.m_numRefPicsActive;
	176	in>>entry.m_numRefPics;
	177	for ( Int i = 0; i < entry.m_numRefPics; i++ )
	178	{
	179	in>>entry.m_referencePics[i];
	180	}
	181	in>>entry.m_interRPSPrediction;
	182	#if AUTO_INTER_RPS
	183	if (entry.m_interRPSPrediction==1)
	184	{
	185	in>>entry.m_deltaRPS;
	186	in>>entry.m_numRefIdc;
	187	for ( Int i = 0; i < entry.m_numRefIdc; i++ )
	188	{
	189	in>>entry.m_refIdc[i];
	190	}
	191	}
	192	else if (entry.m_interRPSPrediction==2)
	193	{
	194	in>>entry.m_deltaRPS;
	195	}
	196	#else
	197	if (entry.m_interRPSPrediction)
	198	{
	199	in>>entry.m_deltaRPS;
	200	in>>entry.m_numRefIdc;
	201	for ( Int i = 0; i < entry.m_numRefIdc; i++ )
	202	{
	203	in>>entry.m_refIdc[i];
	204	}
	205	}
	206	#endif
	207	return in;
	208	}
	209
	210	#if SVC_EXTENSION
	211	void TAppEncCfg::getDirFilename(string& filename, string& dir, const string path)
	212	{
	213	size_t pos = path.find_last_of("\\");
	214	if(pos != std::string::npos)
	215	{
	216	filename.assign(path.begin() + pos + 1, path.end());
	217	dir.assign(path.begin(), path.begin() + pos + 1);
	218	}
	219	else
	220	{
	221	pos = path.find_last_of("/");
	222	if(pos != std::string::npos)
	223	{
	224	filename.assign(path.begin() + pos + 1, path.end());
	225	dir.assign(path.begin(), path.begin() + pos + 1);
	226	}
	227	else
	228	{
	229	filename = path;
	230	dir.assign("");
	231	}
	232	}
	233	}
	234	#endif
	235
	236	static const struct MapStrToProfile {
	237	const Char* str;
	238	Profile::Name value;
	239	} strToProfile[] = {
	240	{"none", Profile::NONE},
	241	{"main", Profile::MAIN},
	242	{"main10", Profile::MAIN10},
	243	{"main-still-picture", Profile::MAINSTILLPICTURE},
	244	};
	245
	246	static const struct MapStrToTier {
	247	const Char* str;
	248	Level::Tier value;
	249	} strToTier[] = {
	250	{"main", Level::MAIN},
	251	{"high", Level::HIGH},
	252	};
	253
	254	static const struct MapStrToLevel {
	255	const Char* str;
	256	Level::Name value;
	257	} strToLevel[] = {
	258	{"none",Level::NONE},
	259	{"1", Level::LEVEL1},
	260	{"2", Level::LEVEL2},
	261	{"2.1", Level::LEVEL2_1},
	262	{"3", Level::LEVEL3},
	263	{"3.1", Level::LEVEL3_1},
	264	{"4", Level::LEVEL4},
	265	{"4.1", Level::LEVEL4_1},
	266	{"5", Level::LEVEL5},
	267	{"5.1", Level::LEVEL5_1},
	268	{"5.2", Level::LEVEL5_2},
	269	{"6", Level::LEVEL6},
	270	{"6.1", Level::LEVEL6_1},
	271	{"6.2", Level::LEVEL6_2},
	272	};
	273
	274	template<typename T, typename P>
	275	static istream& readStrToEnum(P map[], unsigned long mapLen, istream &in, T &val)
	276	{
	277	string str;
	278	in >> str;
	279
	280	for (Int i = 0; i < mapLen; i++)
	281	{
	282	if (str == map[i].str)
	283	{
	284	val = map[i].value;
	285	goto found;
	286	}
	287	}
	288	/* not found */
	289	in.setstate(ios::failbit);
	290	found:
	291	return in;
	292	}
	293
	294	static istream& operator>>(istream &in, Profile::Name &profile)
	295	{
	296	return readStrToEnum(strToProfile, sizeof(strToProfile)/sizeof(*strToProfile), in, profile);
	297	}
	298
	299	static istream& operator>>(istream &in, Level::Tier &tier)
	300	{
	301	return readStrToEnum(strToTier, sizeof(strToTier)/sizeof(*strToTier), in, tier);
	302	}
	303
	304	static istream& operator>>(istream &in, Level::Name &level)
	305	{
	306	return readStrToEnum(strToLevel, sizeof(strToLevel)/sizeof(*strToLevel), in, level);
	307	}
	308
	309	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	310	Void readBoolString(const string inpString, const Int numEntries, Bool* &memberArray, const char *elementName);
	311	Void readIntString(const string inpString, const Int numEntries, Int* &memberArray, const char *elementName);
	312	#endif
	313	// ====================================================================================================================
	314	// Public member functions
	315	// ====================================================================================================================
	316
	317	/** \param argc number of arguments
	318	\param argv array of arguments
	319	\retval true when success
	320	*/
	321	Bool TAppEncCfg::parseCfg( Int argc, Char* argv[] )
	322	{
	323	Bool do_help = false;
	324
	325	#if SVC_EXTENSION
	326	string cfg_LayerCfgFile [MAX_LAYERS];
	327	string cfg_BitstreamFile;
	328	string* cfg_InputFile [MAX_LAYERS];
	329	string* cfg_ReconFile [MAX_LAYERS];
	330	Double* cfg_fQP [MAX_LAYERS];
	331
	332	Int* cfg_SourceWidth [MAX_LAYERS];
	333	Int* cfg_SourceHeight [MAX_LAYERS];
	334	Int* cfg_FrameRate [MAX_LAYERS];
	335	Int* cfg_IntraPeriod [MAX_LAYERS];
	336	Int* cfg_conformanceMode [MAX_LAYERS];
	337	#if VPS_EXTN_DIRECT_REF_LAYERS
	338	Int* cfg_numDirectRefLayers [MAX_LAYERS];
[269]	339	string cfg_refLayerIds [MAX_LAYERS];
	340	string* cfg_refLayerIdsPtr [MAX_LAYERS];
	341
	342	Int* cfg_numActiveRefLayers [MAX_LAYERS];
	343	string cfg_predLayerIds [MAX_LAYERS];
	344	string* cfg_predLayerIdsPtr [MAX_LAYERS];
[191]	345	#endif
	346	#if SCALED_REF_LAYER_OFFSETS
	347	Int* cfg_scaledRefLayerLeftOffset [MAX_LAYERS];
	348	Int* cfg_scaledRefLayerTopOffset [MAX_LAYERS];
	349	Int* cfg_scaledRefLayerRightOffset [MAX_LAYERS];
	350	Int* cfg_scaledRefLayerBottomOffset [MAX_LAYERS];
	351	#endif
[211]	352	#if RC_SHVC_HARMONIZATION
	353	Bool* cfg_RCEnableRateControl [MAX_LAYERS];
	354	Int* cfg_RCTargetBitRate [MAX_LAYERS];
	355	Bool* cfg_RCKeepHierarchicalBit[MAX_LAYERS];
	356	Bool* cfg_RCLCULevelRC [MAX_LAYERS];
	357	Bool* cfg_RCUseLCUSeparateModel[MAX_LAYERS];
	358	Int* cfg_RCInitialQP [MAX_LAYERS];
	359	Bool* cfg_RCForceIntraQP [MAX_LAYERS];
	360	#endif
[191]	361	for(UInt layer = 0; layer < MAX_LAYERS; layer++)
	362	{
	363	cfg_InputFile[layer] = &m_acLayerCfg[layer].m_cInputFile;
	364	cfg_ReconFile[layer] = &m_acLayerCfg[layer].m_cReconFile;
	365	cfg_fQP[layer] = &m_acLayerCfg[layer].m_fQP;
	366	cfg_SourceWidth[layer] = &m_acLayerCfg[layer].m_iSourceWidth;
	367	cfg_SourceHeight[layer] = &m_acLayerCfg[layer].m_iSourceHeight;
	368	cfg_FrameRate[layer] = &m_acLayerCfg[layer].m_iFrameRate;
	369	cfg_IntraPeriod[layer] = &m_acLayerCfg[layer].m_iIntraPeriod;
	370	cfg_conformanceMode[layer] = &m_acLayerCfg[layer].m_conformanceMode;
	371	#if VPS_EXTN_DIRECT_REF_LAYERS
	372	cfg_numDirectRefLayers [layer] = &m_acLayerCfg[layer].m_numDirectRefLayers;
	373	cfg_refLayerIdsPtr [layer] = &cfg_refLayerIds[layer];
[269]	374	cfg_numActiveRefLayers [layer] = &m_acLayerCfg[layer].m_numActiveRefLayers;
	375	cfg_predLayerIdsPtr [layer] = &cfg_predLayerIds[layer];
[191]	376	#endif
	377	#if SCALED_REF_LAYER_OFFSETS
	378	cfg_scaledRefLayerLeftOffset [layer] = &m_acLayerCfg[layer].m_scaledRefLayerLeftOffset;
	379	cfg_scaledRefLayerTopOffset [layer] = &m_acLayerCfg[layer].m_scaledRefLayerTopOffset;
	380	cfg_scaledRefLayerRightOffset [layer] = &m_acLayerCfg[layer].m_scaledRefLayerRightOffset;
	381	cfg_scaledRefLayerBottomOffset[layer] = &m_acLayerCfg[layer].m_scaledRefLayerBottomOffset;
	382	#endif
[211]	383	#if RC_SHVC_HARMONIZATION
	384	cfg_RCEnableRateControl[layer] = &m_acLayerCfg[layer].m_RCEnableRateControl;
	385	cfg_RCTargetBitRate[layer] = &m_acLayerCfg[layer].m_RCTargetBitrate;
	386	cfg_RCKeepHierarchicalBit[layer] = &m_acLayerCfg[layer].m_RCKeepHierarchicalBit;
	387	cfg_RCLCULevelRC[layer] = &m_acLayerCfg[layer].m_RCLCULevelRC;
	388	cfg_RCUseLCUSeparateModel[layer] = &m_acLayerCfg[layer].m_RCUseLCUSeparateModel;
	389	cfg_RCInitialQP[layer] = &m_acLayerCfg[layer].m_RCInitialQP;
	390	cfg_RCForceIntraQP[layer] = &m_acLayerCfg[layer].m_RCForceIntraQP;
	391	#endif
[191]	392	}
	393	#if AVC_BASE
	394	string cfg_BLInputFile;
	395	#endif
	396	#if AVC_SYNTAX
	397	string cfg_BLSyntaxFile;
	398	#endif
	399	#else
	400	string cfg_InputFile;
	401	string cfg_BitstreamFile;
	402	string cfg_ReconFile;
	403	string cfg_dQPFile;
	404	#endif
	405	string cfg_ColumnWidth;
	406	string cfg_RowHeight;
	407	string cfg_ScalingListFile;
	408	#if J0149_TONE_MAPPING_SEI
	409	string cfg_startOfCodedInterval;
	410	string cfg_codedPivotValue;
	411	string cfg_targetPivotValue;
	412	#endif
	413	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	414	string cfg_bitRateInfoPresentFlag;
	415	string cfg_picRateInfoPresentFlag;
	416	string cfg_avgBitRate;
	417	string cfg_maxBitRate;
	418	string cfg_avgPicRate;
	419	string cfg_constantPicRateIdc;
	420	#endif
	421	po::Options opts;
	422	opts.addOptions()
	423	("help", do_help, false, "this help text")
	424	("c", po::parseConfigFile, "configuration file name")
	425
	426	// File, I/O and source parameters
	427	#if SVC_EXTENSION
	428	("InputFile%d,-i%d", cfg_InputFile, string(""), MAX_LAYERS, "original YUV input file name for layer %d")
	429	("ReconFile%d,-o%d", cfg_ReconFile, string(""), MAX_LAYERS, "reconstruction YUV input file name for layer %d")
	430	("LayerConfig%d,-lc%d", cfg_LayerCfgFile, string(""), MAX_LAYERS, "layer %d configuration file name")
	431	("SourceWidth%d,-wdt%d", cfg_SourceWidth, 0, MAX_LAYERS, "Source picture width for layer %d")
	432	("SourceHeight%d,-hgt%d", cfg_SourceHeight, 0, MAX_LAYERS, "Source picture height for layer %d")
	433	("FrameRate%d,-fr%d", cfg_FrameRate, 0, MAX_LAYERS, "Frame rate for layer %d")
	434	("LambdaModifier%d,-LM%d", m_adLambdaModifier, ( double )1.0, MAX_TLAYER, "Lambda modifier for temporal layer %d")
	435	#if VPS_EXTN_DIRECT_REF_LAYERS
	436	("NumDirectRefLayers%d", cfg_numDirectRefLayers, -1, MAX_LAYERS, "Number of direct reference layers")
	437	("RefLayerIds%d", cfg_refLayerIdsPtr, string(""), MAX_LAYERS, "direct reference layer IDs")
[269]	438	("NumActiveRefLayers%d", cfg_numActiveRefLayers, -1, MAX_LAYERS, "Number of active reference layers")
	439	("PredLayerIds%d", cfg_predLayerIdsPtr, string(""), MAX_LAYERS, "inter-layer prediction layer IDs")
[191]	440	#endif
	441	("NumLayers", m_numLayers, 1, "Number of layers to code")
	442	("ConformanceMode%d", cfg_conformanceMode,0, MAX_LAYERS, "Window conformance mode (0: no cropping, 1:automatic padding, 2: padding, 3:cropping")
[245]	443	("ScalabilityMask0", m_scalabilityMask[0], 0, "scalability_mask[0] (multiview)")
	444	("ScalabilityMask1", m_scalabilityMask[1], 1, "scalability_mask[1] (scalable)" )
	445	("BitstreamFile,b", cfg_BitstreamFile, string(""), "Bitstream output file name")
	446	("InputBitDepth", m_inputBitDepthY, 8, "Bit-depth of input file")
	447	("OutputBitDepth", m_outputBitDepthY, 0, "Bit-depth of output file (default:InternalBitDepth)")
	448	("InternalBitDepth", m_internalBitDepthY, 0, "Bit-depth the codec operates at. (default:InputBitDepth)"
[191]	449	"If different to InputBitDepth, source data will be converted")
[245]	450	("InputBitDepthC", m_inputBitDepthC, 0, "As per InputBitDepth but for chroma component. (default:InputBitDepth)")
	451	("OutputBitDepthC", m_outputBitDepthC, 0, "As per OutputBitDepth but for chroma component. (default:InternalBitDepthC)")
	452	("InternalBitDepthC", m_internalBitDepthC, 0, "As per InternalBitDepth but for chroma component. (default:IntrenalBitDepth)")
[191]	453	#if SCALED_REF_LAYER_OFFSETS
	454	("ScaledRefLayerLeftOffset%d", cfg_scaledRefLayerLeftOffset, 0, MAX_LAYERS, "Horizontal offset of top-left luma sample of scaled base layer picture with respect to"
	455	" top-left luma sample of the EL picture, in units of two luma samples")
	456	("ScaledRefLayerTopOffset%d", cfg_scaledRefLayerTopOffset, 0, MAX_LAYERS, "Vertical offset of top-left luma sample of scaled base layer picture with respect to"
	457	" top-left luma sample of the EL picture, in units of two luma samples")
	458	("ScaledRefLayerRightOffset%d", cfg_scaledRefLayerRightOffset, 0, MAX_LAYERS, "Horizontal offset of bottom-right luma sample of scaled base layer picture with respect to"
	459	" bottom-right luma sample of the EL picture, in units of two luma samples")
	460	("ScaledRefLayerBottomOffset%d", cfg_scaledRefLayerBottomOffset,0, MAX_LAYERS, "Vertical offset of bottom-right luma sample of scaled base layer picture with respect to"
	461	" bottom-right luma sample of the EL picture, in units of two luma samples")
	462	#endif
	463	#if AVC_BASE
	464	("AvcBase,-avc", m_avcBaseLayerFlag, 0, "avc_base_layer_flag")
	465	("InputBLFile,-ibl", cfg_BLInputFile, string(""), "Base layer rec YUV input file name")
	466	#if AVC_SYNTAX
	467	("InputBLSyntaxFile,-ibs", cfg_BLSyntaxFile, string(""), "Base layer syntax input file name")
	468	#endif
	469	#endif
	470	#if REF_IDX_FRAMEWORK
	471	("EnableElRapB,-use-rap-b", m_elRapSliceBEnabled, 0, "Set ILP over base-layer I picture to B picture (default is P picture)")
	472	#endif
	473	#else
	474	("InputFile,i", cfg_InputFile, string(""), "Original YUV input file name")
	475	("BitstreamFile,b", cfg_BitstreamFile, string(""), "Bitstream output file name")
	476	("ReconFile,o", cfg_ReconFile, string(""), "Reconstructed YUV output file name")
	477	("SourceWidth,-wdt", m_iSourceWidth, 0, "Source picture width")
	478	("SourceHeight,-hgt", m_iSourceHeight, 0, "Source picture height")
	479	("InputBitDepth", m_inputBitDepthY, 8, "Bit-depth of input file")
	480	("OutputBitDepth", m_outputBitDepthY, 0, "Bit-depth of output file (default:InternalBitDepth)")
	481	("InternalBitDepth", m_internalBitDepthY, 0, "Bit-depth the codec operates at. (default:InputBitDepth)"
	482	"If different to InputBitDepth, source data will be converted")
	483	("InputBitDepthC", m_inputBitDepthC, 0, "As per InputBitDepth but for chroma component. (default:InputBitDepth)")
	484	("OutputBitDepthC", m_outputBitDepthC, 0, "As per OutputBitDepth but for chroma component. (default:InternalBitDepthC)")
	485	("InternalBitDepthC", m_internalBitDepthC, 0, "As per InternalBitDepth but for chroma component. (default:IntrenalBitDepth)")
	486	("ConformanceMode", m_conformanceMode, 0, "Window conformance mode (0: no window, 1:automatic padding, 2:padding, 3:conformance")
	487	("HorizontalPadding,-pdx",m_aiPad[0], 0, "Horizontal source padding for conformance window mode 2")
	488	("VerticalPadding,-pdy", m_aiPad[1], 0, "Vertical source padding for conformance window mode 2")
	489	("ConfLeft", m_confLeft, 0, "Left offset for window conformance mode 3")
	490	("ConfRight", m_confRight, 0, "Right offset for window conformance mode 3")
	491	("ConfTop", m_confTop, 0, "Top offset for window conformance mode 3")
	492	("ConfBottom", m_confBottom, 0, "Bottom offset for window conformance mode 3")
	493	("FrameRate,-fr", m_iFrameRate, 0, "Frame rate")
	494	#endif
	495	("FrameSkip,-fs", m_FrameSkip, 0u, "Number of frames to skip at start of input YUV")
	496	("FramesToBeEncoded,f", m_framesToBeEncoded, 0, "Number of frames to be encoded (default=all)")
	497
	498	// Profile and level
	499	("Profile", m_profile, Profile::NONE, "Profile to be used when encoding (Incomplete)")
	500	("Level", m_level, Level::NONE, "Level limit to be used, eg 5.1 (Incomplete)")
	501	("Tier", m_levelTier, Level::MAIN, "Tier to use for interpretation of --Level")
	502
	503	#if L0046_CONSTRAINT_FLAGS
	504	("ProgressiveSource", m_progressiveSourceFlag, false, "Indicate that source is progressive")
	505	("InterlacedSource", m_interlacedSourceFlag, false, "Indicate that source is interlaced")
	506	("NonPackedSource", m_nonPackedConstraintFlag, false, "Indicate that source does not contain frame packing")
	507	("FrameOnly", m_frameOnlyConstraintFlag, false, "Indicate that the bitstream contains only frames")
	508	#endif
	509
	510	// Unit definition parameters
	511	("MaxCUWidth", m_uiMaxCUWidth, 64u)
	512	("MaxCUHeight", m_uiMaxCUHeight, 64u)
	513	// todo: remove defaults from MaxCUSize
	514	("MaxCUSize,s", m_uiMaxCUWidth, 64u, "Maximum CU size")
	515	("MaxCUSize,s", m_uiMaxCUHeight, 64u, "Maximum CU size")
	516	("MaxPartitionDepth,h", m_uiMaxCUDepth, 4u, "CU depth")
	517
	518	("QuadtreeTULog2MaxSize", m_uiQuadtreeTULog2MaxSize, 6u, "Maximum TU size in logarithm base 2")
	519	("QuadtreeTULog2MinSize", m_uiQuadtreeTULog2MinSize, 2u, "Minimum TU size in logarithm base 2")
	520
	521	("QuadtreeTUMaxDepthIntra", m_uiQuadtreeTUMaxDepthIntra, 1u, "Depth of TU tree for intra CUs")
	522	("QuadtreeTUMaxDepthInter", m_uiQuadtreeTUMaxDepthInter, 2u, "Depth of TU tree for inter CUs")
	523
	524	// Coding structure paramters
	525	#if SVC_EXTENSION
	526	("IntraPeriod%d,-ip%d", cfg_IntraPeriod, -1, MAX_LAYERS, "intra period in frames for layer %d, (-1: only first frame)")
	527	#else
	528	("IntraPeriod,-ip", m_iIntraPeriod, -1, "Intra period in frames, (-1: only first frame)")
	529	#endif
	530	("DecodingRefreshType,-dr", m_iDecodingRefreshType, 0, "Intra refresh type (0:none 1:CRA 2:IDR)")
	531	("GOPSize,g", m_iGOPSize, 1, "GOP size of temporal structure")
	532	#if !L0034_COMBINED_LIST_CLEANUP
	533	("ListCombination,-lc", m_bUseLComb, true, "Combined reference list for uni-prediction estimation in B-slices")
	534	#endif
	535	// motion options
	536	("FastSearch", m_iFastSearch, 1, "0:Full search 1:Diamond 2:PMVFAST")
	537	("SearchRange,-sr", m_iSearchRange, 96, "Motion search range")
	538	("BipredSearchRange", m_bipredSearchRange, 4, "Motion search range for bipred refinement")
	539	("HadamardME", m_bUseHADME, true, "Hadamard ME for fractional-pel")
	540	("ASR", m_bUseASR, false, "Adaptive motion search range")
	541
	542	#if SVC_EXTENSION
	543	("LambdaModifier%d,-LM%d", m_adLambdaModifier, ( double )1.0, MAX_TLAYER, "Lambda modifier for temporal layer %d")
	544	#else
	545	// Mode decision parameters
	546	("LambdaModifier0,-LM0", m_adLambdaModifier[ 0 ], ( Double )1.0, "Lambda modifier for temporal layer 0")
	547	("LambdaModifier1,-LM1", m_adLambdaModifier[ 1 ], ( Double )1.0, "Lambda modifier for temporal layer 1")
	548	("LambdaModifier2,-LM2", m_adLambdaModifier[ 2 ], ( Double )1.0, "Lambda modifier for temporal layer 2")
	549	("LambdaModifier3,-LM3", m_adLambdaModifier[ 3 ], ( Double )1.0, "Lambda modifier for temporal layer 3")
	550	("LambdaModifier4,-LM4", m_adLambdaModifier[ 4 ], ( Double )1.0, "Lambda modifier for temporal layer 4")
	551	("LambdaModifier5,-LM5", m_adLambdaModifier[ 5 ], ( Double )1.0, "Lambda modifier for temporal layer 5")
	552	("LambdaModifier6,-LM6", m_adLambdaModifier[ 6 ], ( Double )1.0, "Lambda modifier for temporal layer 6")
	553	("LambdaModifier7,-LM7", m_adLambdaModifier[ 7 ], ( Double )1.0, "Lambda modifier for temporal layer 7")
	554	#endif
	555
	556	/* Quantization parameters */
	557	#if SVC_EXTENSION
	558	("QP%d,-q%d", cfg_fQP, 30.0, MAX_LAYERS, "Qp value for layer %d, if value is float, QP is switched once during encoding")
	559	#else
	560	("QP,q", m_fQP, 30.0, "Qp value, if value is float, QP is switched once during encoding")
	561	#endif
	562	("DeltaQpRD,-dqr",m_uiDeltaQpRD, 0u, "max dQp offset for slice")
	563	("MaxDeltaQP,d", m_iMaxDeltaQP, 0, "max dQp offset for block")
	564	("MaxCuDQPDepth,-dqd", m_iMaxCuDQPDepth, 0, "max depth for a minimum CuDQP")
	565
	566	("CbQpOffset,-cbqpofs", m_cbQpOffset, 0, "Chroma Cb QP Offset")
	567	("CrQpOffset,-crqpofs", m_crQpOffset, 0, "Chroma Cr QP Offset")
	568
	569	#if ADAPTIVE_QP_SELECTION
	570	("AdaptiveQpSelection,-aqps", m_bUseAdaptQpSelect, false, "AdaptiveQpSelection")
	571	#endif
	572
	573	("AdaptiveQP,-aq", m_bUseAdaptiveQP, false, "QP adaptation based on a psycho-visual model")
	574	("MaxQPAdaptationRange,-aqr", m_iQPAdaptationRange, 6, "QP adaptation range")
	575	#if !SVC_EXTENSION
	576	("dQPFile,m", cfg_dQPFile, string(""), "dQP file name")
	577	#endif
	578	("RDOQ", m_useRDOQ, true )
	579	("RDOQTS", m_useRDOQTS, true )
	580	#if L0232_RD_PENALTY
	581	("RDpenalty", m_rdPenalty, 0, "RD-penalty for 32x32 TU for intra in non-intra slices. 0:disbaled 1:RD-penalty 2:maximum RD-penalty")
	582	#endif
	583	// Entropy coding parameters
	584	("SBACRD", m_bUseSBACRD, true, "SBAC based RD estimation")
	585
	586	// Deblocking filter parameters
	587	("LoopFilterDisable", m_bLoopFilterDisable, false )
	588	("LoopFilterOffsetInPPS", m_loopFilterOffsetInPPS, false )
	589	("LoopFilterBetaOffset_div2", m_loopFilterBetaOffsetDiv2, 0 )
	590	("LoopFilterTcOffset_div2", m_loopFilterTcOffsetDiv2, 0 )
	591	("DeblockingFilterControlPresent", m_DeblockingFilterControlPresent, false )
	592	#if L0386_DB_METRIC
	593	("DeblockingFilterMetric", m_DeblockingFilterMetric, false )
	594	#endif
	595
	596	// Coding tools
	597	("AMP", m_enableAMP, true, "Enable asymmetric motion partitions")
	598	("TransformSkip", m_useTransformSkip, false, "Intra transform skipping")
	599	("TransformSkipFast", m_useTransformSkipFast, false, "Fast intra transform skipping")
	600	("SAO", m_bUseSAO, true, "Enable Sample Adaptive Offset")
	601	("MaxNumOffsetsPerPic", m_maxNumOffsetsPerPic, 2048, "Max number of SAO offset per picture (Default: 2048)")
	602	("SAOLcuBoundary", m_saoLcuBoundary, false, "0: right/bottom LCU boundary areas skipped from SAO parameter estimation, 1: non-deblocked pixels are used for those areas")
	603	("SAOLcuBasedOptimization", m_saoLcuBasedOptimization, true, "0: SAO picture-based optimization, 1: SAO LCU-based optimization ")
	604	("SliceMode", m_sliceMode, 0, "0: Disable all Recon slice limits, 1: Enforce max # of LCUs, 2: Enforce max # of bytes, 3:specify tiles per dependent slice")
	605	("SliceArgument", m_sliceArgument, 0, "Depending on SliceMode being:"
	606	"\t1: max number of CTUs per slice"
	607	"\t2: max number of bytes per slice"
	608	"\t3: max number of tiles per slice")
	609	("SliceSegmentMode", m_sliceSegmentMode, 0, "0: Disable all slice segment limits, 1: Enforce max # of LCUs, 2: Enforce max # of bytes, 3:specify tiles per dependent slice")
	610	("SliceSegmentArgument", m_sliceSegmentArgument, 0, "Depending on SliceSegmentMode being:"
	611	"\t1: max number of CTUs per slice segment"
	612	"\t2: max number of bytes per slice segment"
	613	"\t3: max number of tiles per slice segment")
	614	("LFCrossSliceBoundaryFlag", m_bLFCrossSliceBoundaryFlag, true)
	615
	616	("ConstrainedIntraPred", m_bUseConstrainedIntraPred, false, "Constrained Intra Prediction")
	617
	618	("PCMEnabledFlag", m_usePCM, false)
	619	("PCMLog2MaxSize", m_pcmLog2MaxSize, 5u)
	620	("PCMLog2MinSize", m_uiPCMLog2MinSize, 3u)
	621	("PCMInputBitDepthFlag", m_bPCMInputBitDepthFlag, true)
	622	("PCMFilterDisableFlag", m_bPCMFilterDisableFlag, false)
	623
	624	("LosslessCuEnabled", m_useLossless, false)
	625
	626	("WeightedPredP,-wpP", m_useWeightedPred, false, "Use weighted prediction in P slices")
	627	("WeightedPredB,-wpB", m_useWeightedBiPred, false, "Use weighted (bidirectional) prediction in B slices")
	628	("Log2ParallelMergeLevel", m_log2ParallelMergeLevel, 2u, "Parallel merge estimation region")
	629	("UniformSpacingIdc", m_iUniformSpacingIdr, 0, "Indicates if the column and row boundaries are distributed uniformly")
	630	("NumTileColumnsMinus1", m_iNumColumnsMinus1, 0, "Number of columns in a picture minus 1")
	631	("ColumnWidthArray", cfg_ColumnWidth, string(""), "Array containing ColumnWidth values in units of LCU")
	632	("NumTileRowsMinus1", m_iNumRowsMinus1, 0, "Number of rows in a picture minus 1")
	633	("RowHeightArray", cfg_RowHeight, string(""), "Array containing RowHeight values in units of LCU")
	634	("LFCrossTileBoundaryFlag", m_bLFCrossTileBoundaryFlag, true, "1: cross-tile-boundary loop filtering. 0:non-cross-tile-boundary loop filtering")
	635	("WaveFrontSynchro", m_iWaveFrontSynchro, 0, "0: no synchro; 1 synchro with TR; 2 TRR etc")
	636	("ScalingList", m_useScalingListId, 0, "0: no scaling list, 1: default scaling lists, 2: scaling lists specified in ScalingListFile")
	637	("ScalingListFile", cfg_ScalingListFile, string(""), "Scaling list file name")
	638	("SignHideFlag,-SBH", m_signHideFlag, 1)
	639	("MaxNumMergeCand", m_maxNumMergeCand, 5u, "Maximum number of merge candidates")
	640
	641	/* Misc. */
	642	("SEIDecodedPictureHash", m_decodedPictureHashSEIEnabled, 0, "Control generation of decode picture hash SEI messages\n"
	643	"\t3: checksum\n"
	644	"\t2: CRC\n"
	645	"\t1: use MD5\n"
	646	"\t0: disable")
	647	("SEIpictureDigest", m_decodedPictureHashSEIEnabled, 0, "deprecated alias for SEIDecodedPictureHash")
	648	("TMVPMode", m_TMVPModeId, 1, "TMVP mode 0: TMVP disable for all slices. 1: TMVP enable for all slices (default) 2: TMVP enable for certain slices only")
	649	("FEN", m_bUseFastEnc, false, "fast encoder setting")
	650	("ECU", m_bUseEarlyCU, false, "Early CU setting")
	651	("FDM", m_useFastDecisionForMerge, true, "Fast decision for Merge RD Cost")
	652	("CFM", m_bUseCbfFastMode, false, "Cbf fast mode setting")
	653	("ESD", m_useEarlySkipDetection, false, "Early SKIP detection setting")
[212]	654	#if FAST_INTRA_SHVC
	655	("FIS", m_useFastIntraScalable, false, "Fast Intra Decision for Scalable HEVC")
	656	#endif
[191]	657	#if RATE_CONTROL_LAMBDA_DOMAIN
[211]	658	#if RC_SHVC_HARMONIZATION
	659	("RateControl%d", cfg_RCEnableRateControl, false, MAX_LAYERS, "Rate control: enable rate control for layer %d")
	660	("TargetBitrate%d", cfg_RCTargetBitRate, 0, MAX_LAYERS, "Rate control: target bitrate for layer %d")
	661	("KeepHierarchicalBit%d", cfg_RCKeepHierarchicalBit, false, MAX_LAYERS, "Rate control: keep hierarchical bit allocation for layer %d")
	662	("LCULevelRateControl%d", cfg_RCLCULevelRC, true, MAX_LAYERS, "Rate control: LCU level RC")
	663	("RCLCUSeparateModel%d", cfg_RCUseLCUSeparateModel, true, MAX_LAYERS, "Rate control: Use LCU level separate R-lambda model")
	664	("InitialQP%d", cfg_RCInitialQP, 0, MAX_LAYERS, "Rate control: initial QP")
	665	("RCForceIntraQP%d", cfg_RCForceIntraQP, false, MAX_LAYERS, "Rate control: force intra QP to be equal to initial QP")
	666	#else
[191]	667	( "RateControl", m_RCEnableRateControl, false, "Rate control: enable rate control" )
	668	( "TargetBitrate", m_RCTargetBitrate, 0, "Rate control: target bitrate" )
	669	( "KeepHierarchicalBit", m_RCKeepHierarchicalBit, false, "Rate control: keep hierarchical bit allocation in rate control algorithm" )
	670	( "LCULevelRateControl", m_RCLCULevelRC, true, "Rate control: true: LCU level RC; false: picture level RC" )
	671	( "RCLCUSeparateModel", m_RCUseLCUSeparateModel, true, "Rate control: use LCU level separate R-lambda model" )
	672	( "InitialQP", m_RCInitialQP, 0, "Rate control: initial QP" )
	673	( "RCForceIntraQP", m_RCForceIntraQP, false, "Rate control: force intra QP to be equal to initial QP" )
[211]	674	#endif
[191]	675	#else
	676	("RateCtrl,-rc", m_enableRateCtrl, false, "Rate control on/off")
	677	("TargetBitrate,-tbr", m_targetBitrate, 0, "Input target bitrate")
	678	("NumLCUInUnit,-nu", m_numLCUInUnit, 0, "Number of LCUs in an Unit")
	679	#endif
	680
	681	("TransquantBypassEnableFlag", m_TransquantBypassEnableFlag, false, "transquant_bypass_enable_flag indicator in PPS")
	682	("CUTransquantBypassFlagValue", m_CUTransquantBypassFlagValue, false, "Fixed cu_transquant_bypass_flag value, when transquant_bypass_enable_flag is enabled")
	683	("RecalculateQPAccordingToLambda", m_recalculateQPAccordingToLambda, false, "Recalculate QP values according to lambda values. Do not suggest to be enabled in all intra case")
	684	("StrongIntraSmoothing,-sis", m_useStrongIntraSmoothing, true, "Enable strong intra smoothing for 32x32 blocks")
	685	("SEIActiveParameterSets", m_activeParameterSetsSEIEnabled, 0, "Enable generation of active parameter sets SEI messages")
	686	("VuiParametersPresent,-vui", m_vuiParametersPresentFlag, false, "Enable generation of vui_parameters()")
	687	("AspectRatioInfoPresent", m_aspectRatioInfoPresentFlag, false, "Signals whether aspect_ratio_idc is present")
	688	("AspectRatioIdc", m_aspectRatioIdc, 0, "aspect_ratio_idc")
	689	("SarWidth", m_sarWidth, 0, "horizontal size of the sample aspect ratio")
	690	("SarHeight", m_sarHeight, 0, "vertical size of the sample aspect ratio")
	691	("OverscanInfoPresent", m_overscanInfoPresentFlag, false, "Indicates whether conformant decoded pictures are suitable for display using overscan\n")
	692	("OverscanAppropriate", m_overscanAppropriateFlag, false, "Indicates whether conformant decoded pictures are suitable for display using overscan\n")
	693	("VideoSignalTypePresent", m_videoSignalTypePresentFlag, false, "Signals whether video_format, video_full_range_flag, and colour_description_present_flag are present")
	694	("VideoFormat", m_videoFormat, 5, "Indicates representation of pictures")
	695	("VideoFullRange", m_videoFullRangeFlag, false, "Indicates the black level and range of luma and chroma signals")
	696	("ColourDescriptionPresent", m_colourDescriptionPresentFlag, false, "Signals whether colour_primaries, transfer_characteristics and matrix_coefficients are present")
	697	("ColourPrimaries", m_colourPrimaries, 2, "Indicates chromaticity coordinates of the source primaries")
	698	("TransferCharateristics", m_transferCharacteristics, 2, "Indicates the opto-electronic transfer characteristics of the source")
	699	("MatrixCoefficients", m_matrixCoefficients, 2, "Describes the matrix coefficients used in deriving luma and chroma from RGB primaries")
	700	("ChromaLocInfoPresent", m_chromaLocInfoPresentFlag, false, "Signals whether chroma_sample_loc_type_top_field and chroma_sample_loc_type_bottom_field are present")
	701	("ChromaSampleLocTypeTopField", m_chromaSampleLocTypeTopField, 0, "Specifies the location of chroma samples for top field")
	702	("ChromaSampleLocTypeBottomField", m_chromaSampleLocTypeBottomField, 0, "Specifies the location of chroma samples for bottom field")
	703	("NeutralChromaIndication", m_neutralChromaIndicationFlag, false, "Indicates that the value of all decoded chroma samples is equal to 1<<(BitDepthCr-1)")
	704	("DefaultDisplayWindowFlag", m_defaultDisplayWindowFlag, false, "Indicates the presence of the Default Window parameters")
	705	("DefDispWinLeftOffset", m_defDispWinLeftOffset, 0, "Specifies the left offset of the default display window from the conformance window")
	706	("DefDispWinRightOffset", m_defDispWinRightOffset, 0, "Specifies the right offset of the default display window from the conformance window")
	707	("DefDispWinTopOffset", m_defDispWinTopOffset, 0, "Specifies the top offset of the default display window from the conformance window")
	708	("DefDispWinBottomOffset", m_defDispWinBottomOffset, 0, "Specifies the bottom offset of the default display window from the conformance window")
	709	("FrameFieldInfoPresentFlag", m_frameFieldInfoPresentFlag, false, "Indicates that pic_struct and field coding related values are present in picture timing SEI messages")
	710	("PocProportionalToTimingFlag", m_pocProportionalToTimingFlag, false, "Indicates that the POC value is proportional to the output time w.r.t. first picture in CVS")
	711	("NumTicksPocDiffOneMinus1", m_numTicksPocDiffOneMinus1, 0, "Number of ticks minus 1 that for a POC difference of one")
	712	("BitstreamRestriction", m_bitstreamRestrictionFlag, false, "Signals whether bitstream restriction parameters are present")
	713	("TilesFixedStructure", m_tilesFixedStructureFlag, false, "Indicates that each active picture parameter set has the same values of the syntax elements related to tiles")
	714	("MotionVectorsOverPicBoundaries", m_motionVectorsOverPicBoundariesFlag, false, "Indicates that no samples outside the picture boundaries are used for inter prediction")
	715	("MaxBytesPerPicDenom", m_maxBytesPerPicDenom, 2, "Indicates a number of bytes not exceeded by the sum of the sizes of the VCL NAL units associated with any coded picture")
	716	("MaxBitsPerMinCuDenom", m_maxBitsPerMinCuDenom, 1, "Indicates an upper bound for the number of bits of coding_unit() data")
	717	("Log2MaxMvLengthHorizontal", m_log2MaxMvLengthHorizontal, 15, "Indicate the maximum absolute value of a decoded horizontal MV component in quarter-pel luma units")
	718	("Log2MaxMvLengthVertical", m_log2MaxMvLengthVertical, 15, "Indicate the maximum absolute value of a decoded vertical MV component in quarter-pel luma units")
	719	("SEIRecoveryPoint", m_recoveryPointSEIEnabled, 0, "Control generation of recovery point SEI messages")
	720	("SEIBufferingPeriod", m_bufferingPeriodSEIEnabled, 0, "Control generation of buffering period SEI messages")
	721	("SEIPictureTiming", m_pictureTimingSEIEnabled, 0, "Control generation of picture timing SEI messages")
	722	#if J0149_TONE_MAPPING_SEI
	723	("SEIToneMappingInfo", m_toneMappingInfoSEIEnabled, false, "Control generation of Tone Mapping SEI messages")
	724	("SEIToneMapId", m_toneMapId, 0, "Specifies Id of Tone Mapping SEI message for a given session")
	725	("SEIToneMapCancelFlag", m_toneMapCancelFlag, false, "Indicates that Tone Mapping SEI message cancels the persistance or follows")
	726	("SEIToneMapPersistenceFlag", m_toneMapPersistenceFlag, true, "Specifies the persistence of the Tone Mapping SEI message")
	727	("SEIToneMapCodedDataBitDepth", m_toneMapCodedDataBitDepth, 8, "Specifies Coded Data BitDepth of Tone Mapping SEI messages")
	728	("SEIToneMapTargetBitDepth", m_toneMapTargetBitDepth, 8, "Specifies Output BitDepth of Tome mapping function")
	729	("SEIToneMapModelId", m_toneMapModelId, 0, "Specifies Model utilized for mapping coded data into target_bit_depth range\n"
	730	"\t0: linear mapping with clipping\n"
	731	"\t1: sigmoidal mapping\n"
	732	"\t2: user-defined table mapping\n"
	733	"\t3: piece-wise linear mapping\n"
	734	"\t4: luminance dynamic range information ")
	735	("SEIToneMapMinValue", m_toneMapMinValue, 0, "Specifies the minimum value in mode 0")
	736	("SEIToneMapMaxValue", m_toneMapMaxValue, 1023, "Specifies the maxmum value in mode 0")
	737	("SEIToneMapSigmoidMidpoint", m_sigmoidMidpoint, 512, "Specifies the centre point in mode 1")
	738	("SEIToneMapSigmoidWidth", m_sigmoidWidth, 960, "Specifies the distance between 5% and 95% values of the target_bit_depth in mode 1")
	739	("SEIToneMapStartOfCodedInterval", cfg_startOfCodedInterval, string(""), "Array of user-defined mapping table")
	740	("SEIToneMapNumPivots", m_numPivots, 0, "Specifies the number of pivot points in mode 3")
	741	("SEIToneMapCodedPivotValue", cfg_codedPivotValue, string(""), "Array of pivot point")
	742	("SEIToneMapTargetPivotValue", cfg_targetPivotValue, string(""), "Array of pivot point")
	743	("SEIToneMapCameraIsoSpeedIdc", m_cameraIsoSpeedIdc, 0, "Indicates the camera ISO speed for daylight illumination")
	744	("SEIToneMapCameraIsoSpeedValue", m_cameraIsoSpeedValue, 400, "Specifies the camera ISO speed for daylight illumination of Extended_ISO")
	745	("SEIToneMapExposureCompensationValueSignFlag", m_exposureCompensationValueSignFlag, 0, "Specifies the sign of ExposureCompensationValue")
	746	("SEIToneMapExposureCompensationValueNumerator", m_exposureCompensationValueNumerator, 0, "Specifies the numerator of ExposureCompensationValue")
	747	("SEIToneMapExposureCompensationValueDenomIdc", m_exposureCompensationValueDenomIdc, 2, "Specifies the denominator of ExposureCompensationValue")
	748	("SEIToneMapRefScreenLuminanceWhite", m_refScreenLuminanceWhite, 350, "Specifies reference screen brightness setting in units of candela per square metre")
	749	("SEIToneMapExtendedRangeWhiteLevel", m_extendedRangeWhiteLevel, 800, "Indicates the luminance dynamic range")
	750	("SEIToneMapNominalBlackLevelLumaCodeValue", m_nominalBlackLevelLumaCodeValue, 16, "Specifies luma sample value of the nominal black level assigned decoded pictures")
	751	("SEIToneMapNominalWhiteLevelLumaCodeValue", m_nominalWhiteLevelLumaCodeValue, 235, "Specifies luma sample value of the nominal white level assigned decoded pictures")
	752	("SEIToneMapExtendedWhiteLevelLumaCodeValue", m_extendedWhiteLevelLumaCodeValue, 300, "Specifies luma sample value of the extended dynamic range assigned decoded pictures")
	753	#endif
	754	("SEIFramePacking", m_framePackingSEIEnabled, 0, "Control generation of frame packing SEI messages")
	755	("SEIFramePackingType", m_framePackingSEIType, 0, "Define frame packing arrangement\n"
	756	"\t0: checkerboard - pixels alternatively represent either frames\n"
	757	"\t1: column alternation - frames are interlaced by column\n"
	758	"\t2: row alternation - frames are interlaced by row\n"
	759	"\t3: side by side - frames are displayed horizontally\n"
	760	"\t4: top bottom - frames are displayed vertically\n"
	761	"\t5: frame alternation - one frame is alternated with the other")
	762	("SEIFramePackingId", m_framePackingSEIId, 0, "Id of frame packing SEI message for a given session")
	763	("SEIFramePackingQuincunx", m_framePackingSEIQuincunx, 0, "Indicate the presence of a Quincunx type video frame")
	764	("SEIFramePackingInterpretation", m_framePackingSEIInterpretation, 0, "Indicate the interpretation of the frame pair\n"
	765	"\t0: unspecified\n"
	766	"\t1: stereo pair, frame0 represents left view\n"
	767	"\t2: stereo pair, frame0 represents right view")
	768	("SEIDisplayOrientation", m_displayOrientationSEIAngle, 0, "Control generation of display orientation SEI messages\n"
	769	"\tN: 0 < N < (2^16 - 1) enable display orientation SEI message with anticlockwise_rotation = N and display_orientation_repetition_period = 1\n"
	770	"\t0: disable")
	771	("SEITemporalLevel0Index", m_temporalLevel0IndexSEIEnabled, 0, "Control generation of temporal level 0 index SEI messages")
	772	("SEIGradualDecodingRefreshInfo", m_gradualDecodingRefreshInfoEnabled, 0, "Control generation of gradual decoding refresh information SEI message")
	773	("SEIDecodingUnitInfo", m_decodingUnitInfoSEIEnabled, 0, "Control generation of decoding unit information SEI message.")
	774	#if L0208_SOP_DESCRIPTION_SEI
	775	("SEISOPDescription", m_SOPDescriptionSEIEnabled, 0, "Control generation of SOP description SEI messages")
	776	#endif
	777	#if K0180_SCALABLE_NESTING_SEI
	778	("SEIScalableNesting", m_scalableNestingSEIEnabled, 0, "Control generation of scalable nesting SEI messages")
	779	#endif
	780	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	781	("BitRatePicRateMaxTLayers", m_bitRatePicRateMaxTLayers, 0, "Maximum number of sub-layers signalled; can be inferred otherwise; here for easy parsing of config. file")
	782	("BitRateInfoPresent", cfg_bitRateInfoPresentFlag, string(""), "Control signalling of bit rate information of avg. bit rate and max. bit rate in VPS\n"
	783	"\t0: Do not sent bit rate info\n"
	784	"\tN (N > 0): Send bit rate info for N sub-layers. N should equal maxTempLayers.")
	785	("PicRateInfoPresent", cfg_picRateInfoPresentFlag, string(""), "Control signalling of picture rate information of avg. bit rate and max. bit rate in VPS\n"
	786	"\t0: Do not sent picture rate info\n"
	787	"\tN (N > 0): Send picture rate info for N sub-layers. N should equal maxTempLayers.")
	788	("AvgBitRate", cfg_avgBitRate, string(""), "List of avg. bit rates for the different sub-layers; include non-negative number even if corresponding flag is 0")
	789	("MaxBitRate", cfg_maxBitRate, string(""), "List of max. bit rates for the different sub-layers; include non-negative number even if corresponding flag is 0")
	790	("AvgPicRate", cfg_avgPicRate, string(""), "List of avg. picture rates for the different sub-layers; include non-negative number even if corresponding flag is 0")
	791	("ConstantPicRateIdc", cfg_constantPicRateIdc, string(""), "List of constant picture rate IDCs; include non-negative number even if corresponding flag is 0")
	792	#endif
	793	;
	794
	795	for(Int i=1; i<MAX_GOP+1; i++) {
	796	std::ostringstream cOSS;
	797	cOSS<<"Frame"<<i;
	798	opts.addOptions()(cOSS.str(), m_GOPList[i-1], GOPEntry());
	799	}
	800	po::setDefaults(opts);
	801	const list<const Char>& argv_unhandled = po::scanArgv(opts, argc, (const Char*) argv);
	802
	803	for (list<const Char*>::const_iterator it = argv_unhandled.begin(); it != argv_unhandled.end(); it++)
	804	{
	805	fprintf(stderr, "Unhandled argument ignored: `%s'\n", *it);
	806	}
	807
	808	if (argc == 1 \|\| do_help)
	809	{
	810	/* argc == 1: no options have been specified */
	811	po::doHelp(cout, opts);
	812	return false;
	813	}
	814
	815	/*
	816	* Set any derived parameters
	817	*/
	818	/* convert std::string to c string for compatability */
	819	#if SVC_EXTENSION
	820	#if AVC_BASE
	821	if( m_avcBaseLayerFlag )
	822	{
	823	*cfg_InputFile[0] = cfg_BLInputFile;
	824	}
	825	#endif
	826	m_pBitstreamFile = cfg_BitstreamFile.empty() ? NULL : strdup(cfg_BitstreamFile.c_str());
	827	#if AVC_SYNTAX
	828	m_BLSyntaxFile = cfg_BLSyntaxFile.empty() ? NULL : strdup(cfg_BLSyntaxFile.c_str());
	829	#endif
	830	#else
	831	m_pchInputFile = cfg_InputFile.empty() ? NULL : strdup(cfg_InputFile.c_str());
	832	m_pchBitstreamFile = cfg_BitstreamFile.empty() ? NULL : strdup(cfg_BitstreamFile.c_str());
	833	m_pchReconFile = cfg_ReconFile.empty() ? NULL : strdup(cfg_ReconFile.c_str());
	834	m_pchdQPFile = cfg_dQPFile.empty() ? NULL : strdup(cfg_dQPFile.c_str());
	835	#endif
	836
	837	Char* pColumnWidth = cfg_ColumnWidth.empty() ? NULL: strdup(cfg_ColumnWidth.c_str());
	838	Char* pRowHeight = cfg_RowHeight.empty() ? NULL : strdup(cfg_RowHeight.c_str());
	839	if( m_iUniformSpacingIdr == 0 && m_iNumColumnsMinus1 > 0 )
	840	{
	841	char *columnWidth;
	842	int i=0;
	843	m_pColumnWidth = new UInt[m_iNumColumnsMinus1];
	844	columnWidth = strtok(pColumnWidth, " ,-");
	845	while(columnWidth!=NULL)
	846	{
	847	if( i>=m_iNumColumnsMinus1 )
	848	{
	849	printf( "The number of columns whose width are defined is larger than the allowed number of columns.\n" );
	850	exit( EXIT_FAILURE );
	851	}
	852	*( m_pColumnWidth + i ) = atoi( columnWidth );
	853	columnWidth = strtok(NULL, " ,-");
	854	i++;
	855	}
	856	if( i<m_iNumColumnsMinus1 )
	857	{
	858	printf( "The width of some columns is not defined.\n" );
	859	exit( EXIT_FAILURE );
	860	}
	861	}
	862	else
	863	{
	864	m_pColumnWidth = NULL;
	865	}
	866
	867	if( m_iUniformSpacingIdr == 0 && m_iNumRowsMinus1 > 0 )
	868	{
	869	char *rowHeight;
	870	int i=0;
	871	m_pRowHeight = new UInt[m_iNumRowsMinus1];
	872	rowHeight = strtok(pRowHeight, " ,-");
	873	while(rowHeight!=NULL)
	874	{
	875	if( i>=m_iNumRowsMinus1 )
	876	{
	877	printf( "The number of rows whose height are defined is larger than the allowed number of rows.\n" );
	878	exit( EXIT_FAILURE );
	879	}
	880	*( m_pRowHeight + i ) = atoi( rowHeight );
	881	rowHeight = strtok(NULL, " ,-");
	882	i++;
	883	}
	884	if( i<m_iNumRowsMinus1 )
	885	{
	886	printf( "The height of some rows is not defined.\n" );
	887	exit( EXIT_FAILURE );
	888	}
	889	}
	890	else
	891	{
	892	m_pRowHeight = NULL;
	893	}
	894	#if VPS_EXTN_DIRECT_REF_LAYERS
	895	for(Int layer = 0; layer < MAX_LAYERS; layer++)
	896	{
	897	Char* pRefLayerIds = cfg_refLayerIds[layer].empty() ? NULL: strdup(cfg_refLayerIds[layer].c_str());
	898	if( m_acLayerCfg[layer].m_numDirectRefLayers > 0 )
	899	{
	900	char *refLayerId;
	901	int i=0;
	902	m_acLayerCfg[layer].m_refLayerIds = new Int[m_acLayerCfg[layer].m_numDirectRefLayers];
	903	refLayerId = strtok(pRefLayerIds, " ,-");
	904	while(refLayerId != NULL)
	905	{
	906	if( i >= m_acLayerCfg[layer].m_numDirectRefLayers )
	907	{
[269]	908	printf( "NumDirectRefLayers: The number of columns whose width are defined is larger than the allowed number of columns.\n" );
[191]	909	exit( EXIT_FAILURE );
	910	}
	911	*( m_acLayerCfg[layer].m_refLayerIds + i ) = atoi( refLayerId );
	912	refLayerId = strtok(NULL, " ,-");
	913	i++;
	914	}
	915	if( i < m_acLayerCfg[layer].m_numDirectRefLayers )
	916	{
[269]	917	printf( "NumDirectRefLayers: The width of some columns is not defined.\n" );
[191]	918	exit( EXIT_FAILURE );
	919	}
	920	}
	921	else
	922	{
	923	m_acLayerCfg[layer].m_refLayerIds = NULL;
	924	}
	925	}
[269]	926
	927	for(Int layer = 0; layer < MAX_LAYERS; layer++)
	928	{
	929	Char* pPredLayerIds = cfg_predLayerIds[layer].empty() ? NULL: strdup(cfg_predLayerIds[layer].c_str());
	930	if( m_acLayerCfg[layer].m_numActiveRefLayers > 0 )
	931	{
	932	char *refLayerId;
	933	int i=0;
	934	m_acLayerCfg[layer].m_predLayerIds = new Int[m_acLayerCfg[layer].m_numActiveRefLayers];
	935	refLayerId = strtok(pPredLayerIds, " ,-");
	936	while(refLayerId != NULL)
	937	{
	938	if( i >= m_acLayerCfg[layer].m_numActiveRefLayers )
	939	{
	940	printf( "NumActiveRefLayers: The number of columns whose width are defined is larger than the allowed number of columns.\n" );
	941	exit( EXIT_FAILURE );
	942	}
	943	*( m_acLayerCfg[layer].m_predLayerIds + i ) = atoi( refLayerId );
	944	refLayerId = strtok(NULL, " ,-");
	945	i++;
	946	}
	947	if( i < m_acLayerCfg[layer].m_numActiveRefLayers )
	948	{
	949	printf( "NumActiveRefLayers: The width of some columns is not defined.\n" );
	950	exit( EXIT_FAILURE );
	951	}
	952	}
	953	else
	954	{
	955	m_acLayerCfg[layer].m_predLayerIds = NULL;
	956	}
	957	}
[191]	958	#endif
	959	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	960	readBoolString(cfg_bitRateInfoPresentFlag, m_bitRatePicRateMaxTLayers, m_bitRateInfoPresentFlag, "bit rate info. present flag" );
	961	readIntString (cfg_avgBitRate, m_bitRatePicRateMaxTLayers, m_avgBitRate, "avg. bit rate" );
	962	readIntString (cfg_maxBitRate, m_bitRatePicRateMaxTLayers, m_maxBitRate, "max. bit rate" );
	963	readBoolString(cfg_picRateInfoPresentFlag, m_bitRatePicRateMaxTLayers, m_picRateInfoPresentFlag, "bit rate info. present flag" );
	964	readIntString (cfg_avgPicRate, m_bitRatePicRateMaxTLayers, m_avgPicRate, "avg. pic rate" );
	965	readIntString (cfg_constantPicRateIdc, m_bitRatePicRateMaxTLayers, m_constantPicRateIdc, "constant pic rate Idc" );
	966	#endif
	967	m_scalingListFile = cfg_ScalingListFile.empty() ? NULL : strdup(cfg_ScalingListFile.c_str());
	968
	969	/* rules for input, output and internal bitdepths as per help text */
	970	if (!m_internalBitDepthY) { m_internalBitDepthY = m_inputBitDepthY; }
	971	if (!m_internalBitDepthC) { m_internalBitDepthC = m_internalBitDepthY; }
	972	if (!m_inputBitDepthC) { m_inputBitDepthC = m_inputBitDepthY; }
	973	if (!m_outputBitDepthY) { m_outputBitDepthY = m_internalBitDepthY; }
	974	if (!m_outputBitDepthC) { m_outputBitDepthC = m_internalBitDepthC; }
	975
	976	#if !SVC_EXTENSION
	977	// TODO:ChromaFmt assumes 4:2:0 below
	978	switch (m_conformanceMode)
	979	{
	980	case 0:
	981	{
	982	// no conformance or padding
	983	m_confLeft = m_confRight = m_confTop = m_confBottom = 0;
	984	m_aiPad[1] = m_aiPad[0] = 0;
	985	break;
	986	}
	987	case 1:
	988	{
	989	// automatic padding to minimum CU size
	990	Int minCuSize = m_uiMaxCUHeight >> (m_uiMaxCUDepth - 1);
	991	if (m_iSourceWidth % minCuSize)
	992	{
	993	m_aiPad[0] = m_confRight = ((m_iSourceWidth / minCuSize) + 1) * minCuSize - m_iSourceWidth;
	994	m_iSourceWidth += m_confRight;
	995	}
	996	if (m_iSourceHeight % minCuSize)
	997	{
	998	m_aiPad[1] = m_confBottom = ((m_iSourceHeight / minCuSize) + 1) * minCuSize - m_iSourceHeight;
	999	m_iSourceHeight += m_confBottom;
	1000	}
	1001	if (m_aiPad[0] % TComSPS::getWinUnitX(CHROMA_420) != 0)
	1002	{
	1003	fprintf(stderr, "Error: picture width is not an integer multiple of the specified chroma subsampling\n");
	1004	exit(EXIT_FAILURE);
	1005	}
	1006	if (m_aiPad[1] % TComSPS::getWinUnitY(CHROMA_420) != 0)
	1007	{
	1008	fprintf(stderr, "Error: picture height is not an integer multiple of the specified chroma subsampling\n");
	1009	exit(EXIT_FAILURE);
	1010	}
	1011	break;
	1012	}
	1013	case 2:
	1014	{
	1015	//padding
	1016	m_iSourceWidth += m_aiPad[0];
	1017	m_iSourceHeight += m_aiPad[1];
	1018	m_confRight = m_aiPad[0];
	1019	m_confBottom = m_aiPad[1];
	1020	break;
	1021	}
	1022	case 3:
	1023	{
	1024	// conformance
	1025	if ((m_confLeft == 0) && (m_confRight == 0) && (m_confTop == 0) && (m_confBottom == 0))
	1026	{
	1027	fprintf(stderr, "Warning: Conformance window enabled, but all conformance window parameters set to zero\n");
	1028	}
	1029	if ((m_aiPad[1] != 0) \|\| (m_aiPad[0]!=0))
	1030	{
	1031	fprintf(stderr, "Warning: Conformance window enabled, padding parameters will be ignored\n");
	1032	}
	1033	m_aiPad[1] = m_aiPad[0] = 0;
	1034	break;
	1035	}
	1036	}
	1037
	1038	// allocate slice-based dQP values
	1039	m_aidQP = new Int[ m_framesToBeEncoded + m_iGOPSize + 1 ];
	1040	::memset( m_aidQP, 0, sizeof(Int)*( m_framesToBeEncoded + m_iGOPSize + 1 ) );
	1041
	1042	// handling of floating-point QP values
	1043	// if QP is not integer, sequence is split into two sections having QP and QP+1
	1044	m_iQP = (Int)( m_fQP );
	1045	if ( m_iQP < m_fQP )
	1046	{
	1047	Int iSwitchPOC = (Int)( m_framesToBeEncoded - (m_fQP - m_iQP)*m_framesToBeEncoded + 0.5 );
	1048
	1049	iSwitchPOC = (Int)( (Double)iSwitchPOC / m_iGOPSize + 0.5 )*m_iGOPSize;
	1050	for ( Int i=iSwitchPOC; i<m_framesToBeEncoded + m_iGOPSize + 1; i++ )
	1051	{
	1052	m_aidQP[i] = 1;
	1053	}
	1054	}
	1055
	1056	// reading external dQP description from file
	1057	if ( m_pchdQPFile )
	1058	{
	1059	FILE* fpt=fopen( m_pchdQPFile, "r" );
	1060	if ( fpt )
	1061	{
	1062	Int iValue;
	1063	Int iPOC = 0;
	1064	while ( iPOC < m_framesToBeEncoded )
	1065	{
	1066	if ( fscanf(fpt, "%d", &iValue ) == EOF ) break;
	1067	m_aidQP[ iPOC ] = iValue;
	1068	iPOC++;
	1069	}
	1070	fclose(fpt);
	1071	}
	1072	}
	1073	m_iWaveFrontSubstreams = m_iWaveFrontSynchro ? (m_iSourceHeight + m_uiMaxCUHeight - 1) / m_uiMaxCUHeight : 1;
	1074	#endif
	1075	#if J0149_TONE_MAPPING_SEI
	1076	if( m_toneMappingInfoSEIEnabled && !m_toneMapCancelFlag )
	1077	{
	1078	Char* pcStartOfCodedInterval = cfg_startOfCodedInterval.empty() ? NULL: strdup(cfg_startOfCodedInterval.c_str());
	1079	Char* pcCodedPivotValue = cfg_codedPivotValue.empty() ? NULL: strdup(cfg_codedPivotValue.c_str());
	1080	Char* pcTargetPivotValue = cfg_targetPivotValue.empty() ? NULL: strdup(cfg_targetPivotValue.c_str());
	1081	if( m_toneMapModelId == 2 && pcStartOfCodedInterval )
	1082	{
	1083	char *startOfCodedInterval;
	1084	UInt num = 1u<< m_toneMapTargetBitDepth;
	1085	m_startOfCodedInterval = new Int[num];
	1086	::memset( m_startOfCodedInterval, 0, sizeof(Int)*num );
	1087	startOfCodedInterval = strtok(pcStartOfCodedInterval, " .");
	1088	int i = 0;
	1089	while( startOfCodedInterval && ( i < num ) )
	1090	{
	1091	m_startOfCodedInterval[i] = atoi( startOfCodedInterval );
	1092	startOfCodedInterval = strtok(NULL, " .");
	1093	i++;
	1094	}
	1095	}
	1096	else
	1097	{
	1098	m_startOfCodedInterval = NULL;
	1099	}
	1100	if( ( m_toneMapModelId == 3 ) && ( m_numPivots > 0 ) )
	1101	{
	1102	if( pcCodedPivotValue && pcTargetPivotValue )
	1103	{
	1104	char *codedPivotValue;
	1105	char *targetPivotValue;
	1106	m_codedPivotValue = new Int[m_numPivots];
	1107	m_targetPivotValue = new Int[m_numPivots];
	1108	::memset( m_codedPivotValue, 0, sizeof(Int)*( m_numPivots ) );
	1109	::memset( m_targetPivotValue, 0, sizeof(Int)*( m_numPivots ) );
	1110	codedPivotValue = strtok(pcCodedPivotValue, " .");
	1111	int i=0;
	1112	while(codedPivotValue&&i<m_numPivots)
	1113	{
	1114	m_codedPivotValue[i] = atoi( codedPivotValue );
	1115	codedPivotValue = strtok(NULL, " .");
	1116	i++;
	1117	}
	1118	i=0;
	1119	targetPivotValue = strtok(pcTargetPivotValue, " .");
	1120	while(targetPivotValue&&i<m_numPivots)
	1121	{
	1122	m_targetPivotValue[i]= atoi( targetPivotValue );
	1123	targetPivotValue = strtok(NULL, " .");
	1124	i++;
	1125	}
	1126	}
	1127	}
	1128	else
	1129	{
	1130	m_codedPivotValue = NULL;
	1131	m_targetPivotValue = NULL;
	1132	}
	1133	}
	1134	#endif
	1135	// check validity of input parameters
	1136	xCheckParameter();
	1137
	1138	// set global varibles
	1139	xSetGlobal();
	1140
	1141	// print-out parameters
	1142	xPrintParameter();
	1143
	1144	return true;
	1145	}
	1146	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	1147	Void readBoolString(const string inpString, const Int numEntries, Bool* &memberArray, const char *elementName)
	1148	{
	1149	Char* inpArray = inpString.empty() ? NULL : strdup(inpString.c_str());
	1150	Int i = 0;
	1151	if(numEntries)
	1152	{
	1153	Char* tempArray = strtok(inpArray, " ,-");
	1154	memberArray = new Bool[numEntries];
	1155	while( tempArray != NULL )
	1156	{
	1157	if( i >= numEntries )
	1158	{
	1159	printf( "The number of %s defined is larger than the allowed number\n", elementName );
	1160	exit( EXIT_FAILURE );
	1161	}
	1162	assert( (atoi(tempArray) == 0) \|\| (atoi(tempArray) == 1) );
	1163	*( memberArray + i ) = atoi(tempArray);
	1164	tempArray = strtok(NULL, " ,-");
	1165	i++;
	1166	}
	1167	if( i < numEntries )
	1168	{
	1169	printf( "Some %s are not defined\n", elementName );
	1170	exit( EXIT_FAILURE );
	1171	}
	1172	}
	1173	else
	1174	{
	1175	memberArray = NULL;
	1176	}
	1177	}
	1178
	1179	Void readIntString(const string inpString, const Int numEntries, Int* &memberArray, const char *elementName)
	1180	{
	1181	Char* inpArray = inpString.empty() ? NULL : strdup(inpString.c_str());
	1182	Int i = 0;
	1183	if(numEntries)
	1184	{
	1185	Char* tempArray = strtok(inpArray, " ,-");
	1186	memberArray = new Int[numEntries];
	1187	while( tempArray != NULL )
	1188	{
	1189	if( i >= numEntries )
	1190	{
	1191	printf( "The number of %s defined is larger than the allowed number\n", elementName );
	1192	exit( EXIT_FAILURE );
	1193	}
	1194	*( memberArray + i ) = atoi(tempArray);
	1195	tempArray = strtok(NULL, " ,-");
	1196	i++;
	1197	}
	1198	if( i < numEntries )
	1199	{
	1200	printf( "Some %s are not defined\n", elementName );
	1201	exit( EXIT_FAILURE );
	1202	}
	1203	}
	1204	else
	1205	{
	1206	memberArray = NULL;
	1207	}
	1208	}
	1209	#endif
	1210	// ====================================================================================================================
	1211	// Private member functions
	1212	// ====================================================================================================================
	1213
	1214	Bool confirmPara(Bool bflag, const Char* message);
	1215
	1216	Void TAppEncCfg::xCheckParameter()
	1217	{
	1218	if (!m_decodedPictureHashSEIEnabled)
	1219	{
	1220	fprintf(stderr, "******************************************************************\n");
	1221	fprintf(stderr, " WARNING: --SEIDecodedPictureHash is now disabled by default. \n");
	1222	fprintf(stderr, " Automatic verification of decoded pictures by a \n");
	1223	fprintf(stderr, " decoder requires this option to be enabled. \n");
	1224	fprintf(stderr, "******************************************************************\n");
	1225	}
	1226
	1227	Bool check_failed = false; /* abort if there is a fatal configuration problem */
	1228	#define xConfirmPara(a,b) check_failed \|= confirmPara(a,b)
	1229	// check range of parameters
	1230	xConfirmPara( m_inputBitDepthY < 8, "InputBitDepth must be at least 8" );
	1231	xConfirmPara( m_inputBitDepthC < 8, "InputBitDepthC must be at least 8" );
	1232	#if !SVC_EXTENSION
	1233	xConfirmPara( m_iFrameRate <= 0, "Frame rate must be more than 1" );
	1234	#endif
	1235	xConfirmPara( m_framesToBeEncoded <= 0, "Total Number Of Frames encoded must be more than 0" );
	1236	xConfirmPara( m_iGOPSize < 1 , "GOP Size must be greater or equal to 1" );
	1237	xConfirmPara( m_iGOPSize > 1 && m_iGOPSize % 2, "GOP Size must be a multiple of 2, if GOP Size is greater than 1" );
	1238	#if !SVC_EXTENSION
	1239	xConfirmPara( (m_iIntraPeriod > 0 && m_iIntraPeriod < m_iGOPSize) \|\| m_iIntraPeriod == 0, "Intra period must be more than GOP size, or -1 , not 0" );
	1240	#endif
	1241	xConfirmPara( m_iDecodingRefreshType < 0 \|\| m_iDecodingRefreshType > 2, "Decoding Refresh Type must be equal to 0, 1 or 2" );
	1242	#if !SVC_EXTENSION
	1243	xConfirmPara( m_iQP < -6 * (m_internalBitDepthY - 8) \|\| m_iQP > 51, "QP exceeds supported range (-QpBDOffsety to 51)" );
	1244	#endif
	1245	xConfirmPara( m_loopFilterBetaOffsetDiv2 < -13 \|\| m_loopFilterBetaOffsetDiv2 > 13, "Loop Filter Beta Offset div. 2 exceeds supported range (-13 to 13)");
	1246	xConfirmPara( m_loopFilterTcOffsetDiv2 < -13 \|\| m_loopFilterTcOffsetDiv2 > 13, "Loop Filter Tc Offset div. 2 exceeds supported range (-13 to 13)");
	1247	xConfirmPara( m_iFastSearch < 0 \|\| m_iFastSearch > 2, "Fast Search Mode is not supported value (0:Full search 1:Diamond 2:PMVFAST)" );
	1248	xConfirmPara( m_iSearchRange < 0 , "Search Range must be more than 0" );
	1249	xConfirmPara( m_bipredSearchRange < 0 , "Search Range must be more than 0" );
	1250	xConfirmPara( m_iMaxDeltaQP > 7, "Absolute Delta QP exceeds supported range (0 to 7)" );
	1251	xConfirmPara( m_iMaxCuDQPDepth > m_uiMaxCUDepth - 1, "Absolute depth for a minimum CuDQP exceeds maximum coding unit depth" );
	1252
	1253	xConfirmPara( m_cbQpOffset < -12, "Min. Chroma Cb QP Offset is -12" );
	1254	xConfirmPara( m_cbQpOffset > 12, "Max. Chroma Cb QP Offset is 12" );
	1255	xConfirmPara( m_crQpOffset < -12, "Min. Chroma Cr QP Offset is -12" );
	1256	xConfirmPara( m_crQpOffset > 12, "Max. Chroma Cr QP Offset is 12" );
	1257
	1258	xConfirmPara( m_iQPAdaptationRange <= 0, "QP Adaptation Range must be more than 0" );
	1259	#if !SVC_EXTENSION
	1260	if (m_iDecodingRefreshType == 2)
	1261	{
	1262	xConfirmPara( m_iIntraPeriod > 0 && m_iIntraPeriod <= m_iGOPSize , "Intra period must be larger than GOP size for periodic IDR pictures");
	1263	}
	1264	#endif
	1265	xConfirmPara( (m_uiMaxCUWidth >> m_uiMaxCUDepth) < 4, "Minimum partition width size should be larger than or equal to 8");
	1266	xConfirmPara( (m_uiMaxCUHeight >> m_uiMaxCUDepth) < 4, "Minimum partition height size should be larger than or equal to 8");
	1267	xConfirmPara( m_uiMaxCUWidth < 16, "Maximum partition width size should be larger than or equal to 16");
	1268	xConfirmPara( m_uiMaxCUHeight < 16, "Maximum partition height size should be larger than or equal to 16");
	1269	#if !SVC_EXTENSION
	1270	xConfirmPara( (m_iSourceWidth % (m_uiMaxCUWidth >> (m_uiMaxCUDepth-1)))!=0, "Resulting coded frame width must be a multiple of the minimum CU size");
	1271	xConfirmPara( (m_iSourceHeight % (m_uiMaxCUHeight >> (m_uiMaxCUDepth-1)))!=0, "Resulting coded frame height must be a multiple of the minimum CU size");
	1272	#endif
	1273
	1274	xConfirmPara( m_uiQuadtreeTULog2MinSize < 2, "QuadtreeTULog2MinSize must be 2 or greater.");
	1275	xConfirmPara( m_uiQuadtreeTULog2MaxSize > 5, "QuadtreeTULog2MaxSize must be 5 or smaller.");
	1276	xConfirmPara( (1<<m_uiQuadtreeTULog2MaxSize) > m_uiMaxCUWidth, "QuadtreeTULog2MaxSize must be log2(maxCUSize) or smaller.");
	1277
	1278	xConfirmPara( m_uiQuadtreeTULog2MaxSize < m_uiQuadtreeTULog2MinSize, "QuadtreeTULog2MaxSize must be greater than or equal to m_uiQuadtreeTULog2MinSize.");
	1279	xConfirmPara( (1<<m_uiQuadtreeTULog2MinSize)>(m_uiMaxCUWidth >>(m_uiMaxCUDepth-1)), "QuadtreeTULog2MinSize must not be greater than minimum CU size" ); // HS
	1280	xConfirmPara( (1<<m_uiQuadtreeTULog2MinSize)>(m_uiMaxCUHeight>>(m_uiMaxCUDepth-1)), "QuadtreeTULog2MinSize must not be greater than minimum CU size" ); // HS
	1281	xConfirmPara( ( 1 << m_uiQuadtreeTULog2MinSize ) > ( m_uiMaxCUWidth >> m_uiMaxCUDepth ), "Minimum CU width must be greater than minimum transform size." );
	1282	xConfirmPara( ( 1 << m_uiQuadtreeTULog2MinSize ) > ( m_uiMaxCUHeight >> m_uiMaxCUDepth ), "Minimum CU height must be greater than minimum transform size." );
	1283	xConfirmPara( m_uiQuadtreeTUMaxDepthInter < 1, "QuadtreeTUMaxDepthInter must be greater than or equal to 1" );
	1284	xConfirmPara( m_uiMaxCUWidth < ( 1 << (m_uiQuadtreeTULog2MinSize + m_uiQuadtreeTUMaxDepthInter - 1) ), "QuadtreeTUMaxDepthInter must be less than or equal to the difference between log2(maxCUSize) and QuadtreeTULog2MinSize plus 1" );
	1285	xConfirmPara( m_uiQuadtreeTUMaxDepthIntra < 1, "QuadtreeTUMaxDepthIntra must be greater than or equal to 1" );
	1286	xConfirmPara( m_uiMaxCUWidth < ( 1 << (m_uiQuadtreeTULog2MinSize + m_uiQuadtreeTUMaxDepthIntra - 1) ), "QuadtreeTUMaxDepthInter must be less than or equal to the difference between log2(maxCUSize) and QuadtreeTULog2MinSize plus 1" );
	1287
	1288	xConfirmPara( m_maxNumMergeCand < 1, "MaxNumMergeCand must be 1 or greater.");
	1289	xConfirmPara( m_maxNumMergeCand > 5, "MaxNumMergeCand must be 5 or smaller.");
	1290
	1291	#if !SVC_EXTENSION
	1292	#if ADAPTIVE_QP_SELECTION
	1293	xConfirmPara( m_bUseAdaptQpSelect == true && m_iQP < 0, "AdaptiveQpSelection must be disabled when QP < 0.");
	1294	xConfirmPara( m_bUseAdaptQpSelect == true && (m_cbQpOffset !=0 \|\| m_crQpOffset != 0 ), "AdaptiveQpSelection must be disabled when ChromaQpOffset is not equal to 0.");
	1295	#endif
	1296	#endif
	1297
	1298	if( m_usePCM)
	1299	{
	1300	xConfirmPara( m_uiPCMLog2MinSize < 3, "PCMLog2MinSize must be 3 or greater.");
	1301	xConfirmPara( m_uiPCMLog2MinSize > 5, "PCMLog2MinSize must be 5 or smaller.");
	1302	xConfirmPara( m_pcmLog2MaxSize > 5, "PCMLog2MaxSize must be 5 or smaller.");
	1303	xConfirmPara( m_pcmLog2MaxSize < m_uiPCMLog2MinSize, "PCMLog2MaxSize must be equal to or greater than m_uiPCMLog2MinSize.");
	1304	}
	1305
	1306	xConfirmPara( m_sliceMode < 0 \|\| m_sliceMode > 3, "SliceMode exceeds supported range (0 to 3)" );
	1307	if (m_sliceMode!=0)
	1308	{
	1309	xConfirmPara( m_sliceArgument < 1 , "SliceArgument should be larger than or equal to 1" );
	1310	}
	1311	xConfirmPara( m_sliceSegmentMode < 0 \|\| m_sliceSegmentMode > 3, "SliceSegmentMode exceeds supported range (0 to 3)" );
	1312	if (m_sliceSegmentMode!=0)
	1313	{
	1314	xConfirmPara( m_sliceSegmentArgument < 1 , "SliceSegmentArgument should be larger than or equal to 1" );
	1315	}
	1316
	1317	Bool tileFlag = (m_iNumColumnsMinus1 > 0 \|\| m_iNumRowsMinus1 > 0 );
	1318	xConfirmPara( tileFlag && m_iWaveFrontSynchro, "Tile and Wavefront can not be applied together");
	1319
	1320	//TODO:ChromaFmt assumes 4:2:0 below
	1321	#if !SVC_EXTENSION
	1322	xConfirmPara( m_iSourceWidth % TComSPS::getWinUnitX(CHROMA_420) != 0, "Picture width must be an integer multiple of the specified chroma subsampling");
	1323	xConfirmPara( m_iSourceHeight % TComSPS::getWinUnitY(CHROMA_420) != 0, "Picture height must be an integer multiple of the specified chroma subsampling");
	1324
	1325	xConfirmPara( m_aiPad[0] % TComSPS::getWinUnitX(CHROMA_420) != 0, "Horizontal padding must be an integer multiple of the specified chroma subsampling");
	1326	xConfirmPara( m_aiPad[1] % TComSPS::getWinUnitY(CHROMA_420) != 0, "Vertical padding must be an integer multiple of the specified chroma subsampling");
	1327
	1328	xConfirmPara( m_confLeft % TComSPS::getWinUnitX(CHROMA_420) != 0, "Left conformance window offset must be an integer multiple of the specified chroma subsampling");
	1329	xConfirmPara( m_confRight % TComSPS::getWinUnitX(CHROMA_420) != 0, "Right conformance window offset must be an integer multiple of the specified chroma subsampling");
	1330	xConfirmPara( m_confTop % TComSPS::getWinUnitY(CHROMA_420) != 0, "Top conformance window offset must be an integer multiple of the specified chroma subsampling");
	1331	xConfirmPara( m_confBottom % TComSPS::getWinUnitY(CHROMA_420) != 0, "Bottom conformance window offset must be an integer multiple of the specified chroma subsampling");
	1332	#endif
	1333
	1334	// max CU width and height should be power of 2
	1335	UInt ui = m_uiMaxCUWidth;
	1336	while(ui)
	1337	{
	1338	ui >>= 1;
	1339	if( (ui & 1) == 1)
	1340	xConfirmPara( ui != 1 , "Width should be 2^n");
	1341	}
	1342	ui = m_uiMaxCUHeight;
	1343	while(ui)
	1344	{
	1345	ui >>= 1;
	1346	if( (ui & 1) == 1)
	1347	xConfirmPara( ui != 1 , "Height should be 2^n");
	1348	}
	1349
	1350
	1351	/* if this is an intra-only sequence, ie IntraPeriod=1, don't verify the GOP structure
	1352	* This permits the ability to omit a GOP structure specification */
	1353	#if SVC_EXTENSION
	1354	for(UInt layer = 0; layer < MAX_LAYERS; layer++)
	1355	{
	1356	Int m_iIntraPeriod = m_acLayerCfg[layer].m_iIntraPeriod;
	1357	#endif
	1358	if (m_iIntraPeriod == 1 && m_GOPList[0].m_POC == -1) {
	1359	m_GOPList[0] = GOPEntry();
	1360	m_GOPList[0].m_QPFactor = 1;
	1361	m_GOPList[0].m_betaOffsetDiv2 = 0;
	1362	m_GOPList[0].m_tcOffsetDiv2 = 0;
	1363	m_GOPList[0].m_POC = 1;
	1364	m_GOPList[0].m_numRefPicsActive = 4;
	1365	}
	1366	#if SVC_EXTENSION
	1367	}
	1368	#endif
	1369
	1370	Bool verifiedGOP=false;
	1371	Bool errorGOP=false;
	1372	Int checkGOP=1;
	1373	Int numRefs = 1;
	1374	Int refList[MAX_NUM_REF_PICS+1];
	1375	refList[0]=0;
	1376	Bool isOK[MAX_GOP];
	1377	for(Int i=0; i<MAX_GOP; i++)
	1378	{
	1379	isOK[i]=false;
	1380	}
	1381	Int numOK=0;
	1382	#if !SVC_EXTENSION
	1383	xConfirmPara( m_iIntraPeriod >=0&&(m_iIntraPeriod%m_iGOPSize!=0), "Intra period must be a multiple of GOPSize, or -1" );
	1384	#endif
	1385
	1386	for(Int i=0; i<m_iGOPSize; i++)
	1387	{
	1388	if(m_GOPList[i].m_POC==m_iGOPSize)
	1389	{
	1390	xConfirmPara( m_GOPList[i].m_temporalId!=0 , "The last frame in each GOP must have temporal ID = 0 " );
	1391	}
	1392	}
	1393
	1394	#if SVC_EXTENSION
	1395	xConfirmPara( m_numLayers > MAX_LAYERS , "Number of layers in config file is greater than MAX_LAYERS" );
	1396	m_numLayers = m_numLayers > MAX_LAYERS ? MAX_LAYERS : m_numLayers;
	1397
	1398	// verify layer configuration parameters
	1399	for(UInt layer=0; layer<m_numLayers; layer++)
	1400	{
	1401	if(m_acLayerCfg[layer].xCheckParameter())
	1402	{
	1403	printf("\nError: invalid configuration parameter found in layer %d \n", layer);
	1404	check_failed = true;
	1405	}
	1406	}
	1407	#endif
	1408
	1409	#if SVC_EXTENSION
	1410	// verify layer configuration parameters
	1411	for(UInt layer=0; layer<m_numLayers; layer++)
	1412	{
	1413	Int m_iIntraPeriod = m_acLayerCfg[layer].m_iIntraPeriod;
	1414	#endif
	1415	if ( (m_iIntraPeriod != 1) && !m_loopFilterOffsetInPPS && m_DeblockingFilterControlPresent && (!m_bLoopFilterDisable) )
	1416	{
	1417	for(Int i=0; i<m_iGOPSize; i++)
	1418	{
	1419	xConfirmPara( (m_GOPList[i].m_betaOffsetDiv2 + m_loopFilterBetaOffsetDiv2) < -6 \|\| (m_GOPList[i].m_betaOffsetDiv2 + m_loopFilterBetaOffsetDiv2) > 6, "Loop Filter Beta Offset div. 2 for one of the GOP entries exceeds supported range (-6 to 6)" );
	1420	xConfirmPara( (m_GOPList[i].m_tcOffsetDiv2 + m_loopFilterTcOffsetDiv2) < -6 \|\| (m_GOPList[i].m_tcOffsetDiv2 + m_loopFilterTcOffsetDiv2) > 6, "Loop Filter Tc Offset div. 2 for one of the GOP entries exceeds supported range (-6 to 6)" );
	1421	}
	1422	}
	1423	#if SVC_EXTENSION
	1424	}
	1425	#endif
	1426
	1427	m_extraRPSs=0;
	1428	//start looping through frames in coding order until we can verify that the GOP structure is correct.
	1429	while(!verifiedGOP&&!errorGOP)
	1430	{
	1431	Int curGOP = (checkGOP-1)%m_iGOPSize;
	1432	Int curPOC = ((checkGOP-1)/m_iGOPSize)*m_iGOPSize + m_GOPList[curGOP].m_POC;
	1433	if(m_GOPList[curGOP].m_POC<0)
	1434	{
	1435	printf("\nError: found fewer Reference Picture Sets than GOPSize\n");
	1436	errorGOP=true;
	1437	}
	1438	else
	1439	{
	1440	//check that all reference pictures are available, or have a POC < 0 meaning they might be available in the next GOP.
	1441	Bool beforeI = false;
	1442	for(Int i = 0; i< m_GOPList[curGOP].m_numRefPics; i++)
	1443	{
	1444	Int absPOC = curPOC+m_GOPList[curGOP].m_referencePics[i];
	1445	if(absPOC < 0)
	1446	{
	1447	beforeI=true;
	1448	}
	1449	else
	1450	{
	1451	Bool found=false;
	1452	for(Int j=0; j<numRefs; j++)
	1453	{
	1454	if(refList[j]==absPOC)
	1455	{
	1456	found=true;
	1457	for(Int k=0; k<m_iGOPSize; k++)
	1458	{
	1459	if(absPOC%m_iGOPSize == m_GOPList[k].m_POC%m_iGOPSize)
	1460	{
	1461	if(m_GOPList[k].m_temporalId==m_GOPList[curGOP].m_temporalId)
	1462	{
	1463	m_GOPList[k].m_refPic = true;
	1464	}
	1465	m_GOPList[curGOP].m_usedByCurrPic[i]=m_GOPList[k].m_temporalId<=m_GOPList[curGOP].m_temporalId;
	1466	}
	1467	}
	1468	}
	1469	}
	1470	if(!found)
	1471	{
	1472	printf("\nError: ref pic %d is not available for GOP frame %d\n",m_GOPList[curGOP].m_referencePics[i],curGOP+1);
	1473	errorGOP=true;
	1474	}
	1475	}
	1476	}
	1477	if(!beforeI&&!errorGOP)
	1478	{
	1479	//all ref frames were present
	1480	if(!isOK[curGOP])
	1481	{
	1482	numOK++;
	1483	isOK[curGOP]=true;
	1484	if(numOK==m_iGOPSize)
	1485	{
	1486	verifiedGOP=true;
	1487	}
	1488	}
	1489	}
	1490	else
	1491	{
	1492	//create a new GOPEntry for this frame containing all the reference pictures that were available (POC > 0)
	1493	m_GOPList[m_iGOPSize+m_extraRPSs]=m_GOPList[curGOP];
	1494	Int newRefs=0;
	1495	for(Int i = 0; i< m_GOPList[curGOP].m_numRefPics; i++)
	1496	{
	1497	Int absPOC = curPOC+m_GOPList[curGOP].m_referencePics[i];
	1498	if(absPOC>=0)
	1499	{
	1500	m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[newRefs]=m_GOPList[curGOP].m_referencePics[i];
	1501	m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[newRefs]=m_GOPList[curGOP].m_usedByCurrPic[i];
	1502	newRefs++;
	1503	}
	1504	}
	1505	Int numPrefRefs = m_GOPList[curGOP].m_numRefPicsActive;
	1506
	1507	for(Int offset = -1; offset>-checkGOP; offset--)
	1508	{
	1509	//step backwards in coding order and include any extra available pictures we might find useful to replace the ones with POC < 0.
	1510	Int offGOP = (checkGOP-1+offset)%m_iGOPSize;
	1511	Int offPOC = ((checkGOP-1+offset)/m_iGOPSize)*m_iGOPSize + m_GOPList[offGOP].m_POC;
	1512	if(offPOC>=0&&m_GOPList[offGOP].m_temporalId<=m_GOPList[curGOP].m_temporalId)
	1513	{
	1514	Bool newRef=false;
	1515	for(Int i=0; i<numRefs; i++)
	1516	{
	1517	if(refList[i]==offPOC)
	1518	{
	1519	newRef=true;
	1520	}
	1521	}
	1522	for(Int i=0; i<newRefs; i++)
	1523	{
	1524	if(m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[i]==offPOC-curPOC)
	1525	{
	1526	newRef=false;
	1527	}
	1528	}
	1529	if(newRef)
	1530	{
	1531	Int insertPoint=newRefs;
	1532	//this picture can be added, find appropriate place in list and insert it.
	1533	if(m_GOPList[offGOP].m_temporalId==m_GOPList[curGOP].m_temporalId)
	1534	{
	1535	m_GOPList[offGOP].m_refPic = true;
	1536	}
	1537	for(Int j=0; j<newRefs; j++)
	1538	{
	1539	if(m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j]<offPOC-curPOC\|\|m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j]>0)
	1540	{
	1541	insertPoint = j;
	1542	break;
	1543	}
	1544	}
	1545	Int prev = offPOC-curPOC;
	1546	Int prevUsed = m_GOPList[offGOP].m_temporalId<=m_GOPList[curGOP].m_temporalId;
	1547	for(Int j=insertPoint; j<newRefs+1; j++)
	1548	{
	1549	Int newPrev = m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j];
	1550	Int newUsed = m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[j];
	1551	m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j]=prev;
	1552	m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[j]=prevUsed;
	1553	prevUsed=newUsed;
	1554	prev=newPrev;
	1555	}
	1556	newRefs++;
	1557	}
	1558	}
	1559	if(newRefs>=numPrefRefs)
	1560	{
	1561	break;
	1562	}
	1563	}
	1564	m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefPics=newRefs;
	1565	m_GOPList[m_iGOPSize+m_extraRPSs].m_POC = curPOC;
	1566	if (m_extraRPSs == 0)
	1567	{
	1568	m_GOPList[m_iGOPSize+m_extraRPSs].m_interRPSPrediction = 0;
	1569	m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefIdc = 0;
	1570	}
	1571	else
	1572	{
	1573	Int rIdx = m_iGOPSize + m_extraRPSs - 1;
	1574	Int refPOC = m_GOPList[rIdx].m_POC;
	1575	Int refPics = m_GOPList[rIdx].m_numRefPics;
	1576	Int newIdc=0;
	1577	for(Int i = 0; i<= refPics; i++)
	1578	{
	1579	Int deltaPOC = ((i != refPics)? m_GOPList[rIdx].m_referencePics[i] : 0); // check if the reference abs POC is >= 0
	1580	Int absPOCref = refPOC+deltaPOC;
	1581	Int refIdc = 0;
	1582	for (Int j = 0; j < m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefPics; j++)
	1583	{
	1584	if ( (absPOCref - curPOC) == m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j])
	1585	{
	1586	if (m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[j])
	1587	{
	1588	refIdc = 1;
	1589	}
	1590	else
	1591	{
	1592	refIdc = 2;
	1593	}
	1594	}
	1595	}
	1596	m_GOPList[m_iGOPSize+m_extraRPSs].m_refIdc[newIdc]=refIdc;
	1597	newIdc++;
	1598	}
	1599	m_GOPList[m_iGOPSize+m_extraRPSs].m_interRPSPrediction = 1;
	1600	m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefIdc = newIdc;
	1601	m_GOPList[m_iGOPSize+m_extraRPSs].m_deltaRPS = refPOC - m_GOPList[m_iGOPSize+m_extraRPSs].m_POC;
	1602	}
	1603	curGOP=m_iGOPSize+m_extraRPSs;
	1604	m_extraRPSs++;
	1605	}
	1606	numRefs=0;
	1607	for(Int i = 0; i< m_GOPList[curGOP].m_numRefPics; i++)
	1608	{
	1609	Int absPOC = curPOC+m_GOPList[curGOP].m_referencePics[i];
	1610	if(absPOC >= 0)
	1611	{
	1612	refList[numRefs]=absPOC;
	1613	numRefs++;
	1614	}
	1615	}
	1616	refList[numRefs]=curPOC;
	1617	numRefs++;
	1618	}
	1619	checkGOP++;
	1620	}
	1621	xConfirmPara(errorGOP,"Invalid GOP structure given");
	1622	m_maxTempLayer = 1;
	1623	for(Int i=0; i<m_iGOPSize; i++)
	1624	{
	1625	if(m_GOPList[i].m_temporalId >= m_maxTempLayer)
	1626	{
	1627	m_maxTempLayer = m_GOPList[i].m_temporalId+1;
	1628	}
	1629	xConfirmPara(m_GOPList[i].m_sliceType!='B'&&m_GOPList[i].m_sliceType!='P', "Slice type must be equal to B or P");
	1630	}
	1631	for(Int i=0; i<MAX_TLAYER; i++)
	1632	{
	1633	m_numReorderPics[i] = 0;
	1634	#if L0323_DPB
	1635	m_maxDecPicBuffering[i] = 1;
	1636	#else
	1637	m_maxDecPicBuffering[i] = 0;
	1638	#endif
	1639	}
	1640	for(Int i=0; i<m_iGOPSize; i++)
	1641	{
	1642	#if L0323_DPB
	1643	if(m_GOPList[i].m_numRefPics+1 > m_maxDecPicBuffering[m_GOPList[i].m_temporalId])
	1644	#else
	1645	if(m_GOPList[i].m_numRefPics > m_maxDecPicBuffering[m_GOPList[i].m_temporalId])
	1646	#endif
	1647	{
	1648	#if L0323_DPB
	1649	m_maxDecPicBuffering[m_GOPList[i].m_temporalId] = m_GOPList[i].m_numRefPics + 1;
	1650	#else
	1651	m_maxDecPicBuffering[m_GOPList[i].m_temporalId] = m_GOPList[i].m_numRefPics;
	1652	#endif
	1653	}
	1654	Int highestDecodingNumberWithLowerPOC = 0;
	1655	for(Int j=0; j<m_iGOPSize; j++)
	1656	{
	1657	if(m_GOPList[j].m_POC <= m_GOPList[i].m_POC)
	1658	{
	1659	highestDecodingNumberWithLowerPOC = j;
	1660	}
	1661	}
	1662	Int numReorder = 0;
	1663	for(Int j=0; j<highestDecodingNumberWithLowerPOC; j++)
	1664	{
	1665	if(m_GOPList[j].m_temporalId <= m_GOPList[i].m_temporalId &&
	1666	m_GOPList[j].m_POC > m_GOPList[i].m_POC)
	1667	{
	1668	numReorder++;
	1669	}
	1670	}
	1671	if(numReorder > m_numReorderPics[m_GOPList[i].m_temporalId])
	1672	{
	1673	m_numReorderPics[m_GOPList[i].m_temporalId] = numReorder;
	1674	}
	1675	}
	1676	for(Int i=0; i<MAX_TLAYER-1; i++)
	1677	{
	1678	// a lower layer can not have higher value of m_numReorderPics than a higher layer
	1679	if(m_numReorderPics[i+1] < m_numReorderPics[i])
	1680	{
	1681	m_numReorderPics[i+1] = m_numReorderPics[i];
	1682	}
	1683	#if L0323_DPB
	1684	// the value of num_reorder_pics[ i ] shall be in the range of 0 to max_dec_pic_buffering[ i ] - 1, inclusive
	1685	if(m_numReorderPics[i] > m_maxDecPicBuffering[i] - 1)
	1686	{
	1687	m_maxDecPicBuffering[i] = m_numReorderPics[i] + 1;
	1688	}
	1689	#else
	1690	// the value of num_reorder_pics[ i ] shall be in the range of 0 to max_dec_pic_buffering[ i ], inclusive
	1691	if(m_numReorderPics[i] > m_maxDecPicBuffering[i])
	1692	{
	1693	m_maxDecPicBuffering[i] = m_numReorderPics[i];
	1694	}
	1695	#endif
	1696	// a lower layer can not have higher value of m_uiMaxDecPicBuffering than a higher layer
	1697	if(m_maxDecPicBuffering[i+1] < m_maxDecPicBuffering[i])
	1698	{
	1699	m_maxDecPicBuffering[i+1] = m_maxDecPicBuffering[i];
	1700	}
	1701	}
	1702
	1703
	1704	#if L0323_DPB
	1705	// the value of num_reorder_pics[ i ] shall be in the range of 0 to max_dec_pic_buffering[ i ] - 1, inclusive
	1706	if(m_numReorderPics[MAX_TLAYER-1] > m_maxDecPicBuffering[MAX_TLAYER-1] - 1)
	1707	{
	1708	m_maxDecPicBuffering[MAX_TLAYER-1] = m_numReorderPics[MAX_TLAYER-1] + 1;
	1709	}
	1710	#else
	1711	// the value of num_reorder_pics[ i ] shall be in the range of 0 to max_dec_pic_buffering[ i ], inclusive
	1712	if(m_numReorderPics[MAX_TLAYER-1] > m_maxDecPicBuffering[MAX_TLAYER-1])
	1713	{
	1714	m_maxDecPicBuffering[MAX_TLAYER-1] = m_numReorderPics[MAX_TLAYER-1];
	1715	}
	1716	#endif
	1717
	1718	#if SVC_EXTENSION // ToDo: it should be checked for the case when parameters are different for the layers
	1719	for(UInt layer = 0; layer < MAX_LAYERS; layer++)
	1720	{
	1721	Int m_iSourceWidth = m_acLayerCfg[layer].m_iSourceWidth;
	1722	Int m_iSourceHeight = m_acLayerCfg[layer].m_iSourceHeight;
	1723	#endif
	1724	if(m_vuiParametersPresentFlag && m_bitstreamRestrictionFlag)
	1725	{
	1726	Int PicSizeInSamplesY = m_iSourceWidth * m_iSourceHeight;
	1727	if(tileFlag)
	1728	{
	1729	Int maxTileWidth = 0;
	1730	Int maxTileHeight = 0;
	1731	Int widthInCU = (m_iSourceWidth % m_uiMaxCUWidth) ? m_iSourceWidth/m_uiMaxCUWidth + 1: m_iSourceWidth/m_uiMaxCUWidth;
	1732	Int heightInCU = (m_iSourceHeight % m_uiMaxCUHeight) ? m_iSourceHeight/m_uiMaxCUHeight + 1: m_iSourceHeight/m_uiMaxCUHeight;
	1733	if(m_iUniformSpacingIdr)
	1734	{
	1735	maxTileWidth = m_uiMaxCUWidth*((widthInCU+m_iNumColumnsMinus1)/(m_iNumColumnsMinus1+1));
	1736	maxTileHeight = m_uiMaxCUHeight*((heightInCU+m_iNumRowsMinus1)/(m_iNumRowsMinus1+1));
	1737	// if only the last tile-row is one treeblock higher than the others
	1738	// the maxTileHeight becomes smaller if the last row of treeblocks has lower height than the others
	1739	if(!((heightInCU-1)%(m_iNumRowsMinus1+1)))
	1740	{
	1741	maxTileHeight = maxTileHeight - m_uiMaxCUHeight + (m_iSourceHeight % m_uiMaxCUHeight);
	1742	}
	1743	// if only the last tile-column is one treeblock wider than the others
	1744	// the maxTileWidth becomes smaller if the last column of treeblocks has lower width than the others
	1745	if(!((widthInCU-1)%(m_iNumColumnsMinus1+1)))
	1746	{
	1747	maxTileWidth = maxTileWidth - m_uiMaxCUWidth + (m_iSourceWidth % m_uiMaxCUWidth);
	1748	}
	1749	}
	1750	else // not uniform spacing
	1751	{
	1752	if(m_iNumColumnsMinus1<1)
	1753	{
	1754	maxTileWidth = m_iSourceWidth;
	1755	}
	1756	else
	1757	{
	1758	Int accColumnWidth = 0;
	1759	for(Int col=0; col<(m_iNumColumnsMinus1); col++)
	1760	{
	1761	maxTileWidth = m_pColumnWidth[col]>maxTileWidth ? m_pColumnWidth[col]:maxTileWidth;
	1762	accColumnWidth += m_pColumnWidth[col];
	1763	}
	1764	maxTileWidth = (widthInCU-accColumnWidth)>maxTileWidth ? m_uiMaxCUWidth(widthInCU-accColumnWidth):m_uiMaxCUWidthmaxTileWidth;
	1765	}
	1766	if(m_iNumRowsMinus1<1)
	1767	{
	1768	maxTileHeight = m_iSourceHeight;
	1769	}
	1770	else
	1771	{
	1772	Int accRowHeight = 0;
	1773	for(Int row=0; row<(m_iNumRowsMinus1); row++)
	1774	{
	1775	maxTileHeight = m_pRowHeight[row]>maxTileHeight ? m_pRowHeight[row]:maxTileHeight;
	1776	accRowHeight += m_pRowHeight[row];
	1777	}
	1778	maxTileHeight = (heightInCU-accRowHeight)>maxTileHeight ? m_uiMaxCUHeight(heightInCU-accRowHeight):m_uiMaxCUHeightmaxTileHeight;
	1779	}
	1780	}
	1781	Int maxSizeInSamplesY = maxTileWidth*maxTileHeight;
	1782	m_minSpatialSegmentationIdc = 4*PicSizeInSamplesY/maxSizeInSamplesY-4;
	1783	}
	1784	else if(m_iWaveFrontSynchro)
	1785	{
	1786	m_minSpatialSegmentationIdc = 4PicSizeInSamplesY/((2m_iSourceHeight+m_iSourceWidth)*m_uiMaxCUHeight)-4;
	1787	}
	1788	else if(m_sliceMode == 1)
	1789	{
	1790	m_minSpatialSegmentationIdc = 4PicSizeInSamplesY/(m_sliceArgumentm_uiMaxCUWidth*m_uiMaxCUHeight)-4;
	1791	}
	1792	else
	1793	{
	1794	m_minSpatialSegmentationIdc = 0;
	1795	}
	1796	}
	1797	#if SVC_EXTENSION
	1798	}
	1799	#endif
	1800	#if !L0034_COMBINED_LIST_CLEANUP
	1801	xConfirmPara( m_bUseLComb==false && m_numReorderPics[MAX_TLAYER-1]!=0, "ListCombination can only be 0 in low delay coding (more precisely when L0 and L1 are identical)" ); // Note however this is not the full necessary condition as ref_pic_list_combination_flag can only be 0 if L0 == L1.
	1802	#endif
	1803	xConfirmPara( m_iWaveFrontSynchro < 0, "WaveFrontSynchro cannot be negative" );
	1804	#if !SVC_EXTENSION
	1805	xConfirmPara( m_iWaveFrontSubstreams <= 0, "WaveFrontSubstreams must be positive" );
	1806	xConfirmPara( m_iWaveFrontSubstreams > 1 && !m_iWaveFrontSynchro, "Must have WaveFrontSynchro > 0 in order to have WaveFrontSubstreams > 1" );
	1807	#endif
	1808
	1809	xConfirmPara( m_decodedPictureHashSEIEnabled<0 \|\| m_decodedPictureHashSEIEnabled>3, "this hash type is not correct!\n");
	1810
	1811	#if J0149_TONE_MAPPING_SEI
	1812	if (m_toneMappingInfoSEIEnabled)
	1813	{
	1814	xConfirmPara( m_toneMapCodedDataBitDepth < 8 \|\| m_toneMapCodedDataBitDepth > 14 , "SEIToneMapCodedDataBitDepth must be in rage 8 to 14");
	1815	xConfirmPara( m_toneMapTargetBitDepth < 1 \|\| (m_toneMapTargetBitDepth > 16 && m_toneMapTargetBitDepth < 255) , "SEIToneMapTargetBitDepth must be in rage 1 to 16 or equal to 255");
	1816	xConfirmPara( m_toneMapModelId < 0 \|\| m_toneMapModelId > 4 , "SEIToneMapModelId must be in rage 0 to 4");
	1817	xConfirmPara( m_cameraIsoSpeedValue == 0, "SEIToneMapCameraIsoSpeedValue shall not be equal to 0");
	1818	xConfirmPara( m_extendedRangeWhiteLevel < 100, "SEIToneMapExtendedRangeWhiteLevel should be greater than or equal to 100");
	1819	xConfirmPara( m_nominalBlackLevelLumaCodeValue >= m_nominalWhiteLevelLumaCodeValue, "SEIToneMapNominalWhiteLevelLumaCodeValue shall be greater than SEIToneMapNominalBlackLevelLumaCodeValue");
	1820	xConfirmPara( m_extendedWhiteLevelLumaCodeValue < m_nominalWhiteLevelLumaCodeValue, "SEIToneMapExtendedWhiteLevelLumaCodeValue shall be greater than or equal to SEIToneMapNominalWhiteLevelLumaCodeValue");
	1821	}
	1822	#endif
	1823
	1824	#if RATE_CONTROL_LAMBDA_DOMAIN
[211]	1825	#if RC_SHVC_HARMONIZATION
	1826	for ( Int layer=0; layer<m_numLayers; layer++ )
	1827	{
	1828	if ( m_acLayerCfg[layer].m_RCEnableRateControl )
	1829	{
	1830	if ( m_acLayerCfg[layer].m_RCForceIntraQP )
	1831	{
	1832	if ( m_acLayerCfg[layer].m_RCInitialQP == 0 )
	1833	{
	1834	printf( "\nInitial QP for rate control is not specified. Reset not to use force intra QP!" );
	1835	m_acLayerCfg[layer].m_RCForceIntraQP = false;
	1836	}
	1837	}
	1838	}
	1839	xConfirmPara( m_uiDeltaQpRD > 0, "Rate control cannot be used together with slice level multiple-QP optimization!\n" );
	1840	}
	1841	#else
[191]	1842	if ( m_RCEnableRateControl )
	1843	{
	1844	if ( m_RCForceIntraQP )
	1845	{
	1846	if ( m_RCInitialQP == 0 )
	1847	{
	1848	printf( "\nInitial QP for rate control is not specified. Reset not to use force intra QP!" );
	1849	m_RCForceIntraQP = false;
	1850	}
	1851	}
	1852	xConfirmPara( m_uiDeltaQpRD > 0, "Rate control cannot be used together with slice level multiple-QP optimization!\n" );
	1853	}
[211]	1854	#endif
[191]	1855	#else
	1856	if(m_enableRateCtrl)
	1857	{
	1858	Int numLCUInWidth = (m_iSourceWidth / m_uiMaxCUWidth) + (( m_iSourceWidth % m_uiMaxCUWidth ) ? 1 : 0);
	1859	Int numLCUInHeight = (m_iSourceHeight / m_uiMaxCUHeight)+ (( m_iSourceHeight % m_uiMaxCUHeight) ? 1 : 0);
	1860	Int numLCUInPic = numLCUInWidth * numLCUInHeight;
	1861
	1862	xConfirmPara( (numLCUInPic % m_numLCUInUnit) != 0, "total number of LCUs in a frame should be completely divided by NumLCUInUnit" );
	1863
	1864	m_iMaxDeltaQP = MAX_DELTA_QP;
	1865	m_iMaxCuDQPDepth = MAX_CUDQP_DEPTH;
	1866	}
	1867	#endif
	1868
	1869	xConfirmPara(!m_TransquantBypassEnableFlag && m_CUTransquantBypassFlagValue, "CUTransquantBypassFlagValue cannot be 1 when TransquantBypassEnableFlag is 0");
	1870
	1871	xConfirmPara(m_log2ParallelMergeLevel < 2, "Log2ParallelMergeLevel should be larger than or equal to 2");
	1872	#if L0444_FPA_TYPE
	1873	if (m_framePackingSEIEnabled)
	1874	{
	1875	xConfirmPara(m_framePackingSEIType < 3 \|\| m_framePackingSEIType > 5 , "SEIFramePackingType must be in rage 3 to 5");
	1876	}
	1877	#endif
	1878	#if VPS_EXTN_DIRECT_REF_LAYERS
	1879	xConfirmPara( (m_acLayerCfg[0].m_numDirectRefLayers != 0) && (m_acLayerCfg[0].m_numDirectRefLayers != -1), "Layer 0 cannot have any reference layers" );
	1880	// NOTE: m_numDirectRefLayers (for any layer) could be -1 (not signalled in cfg), in which case only the "previous layer" would be taken for reference
	1881	for(Int layer = 1; layer < MAX_LAYERS; layer++)
	1882	{
	1883	xConfirmPara(m_acLayerCfg[layer].m_numDirectRefLayers > layer, "Cannot reference more layers than before current layer");
	1884	for(Int i = 0; i < m_acLayerCfg[layer].m_numDirectRefLayers; i++)
	1885	{
	1886	xConfirmPara(m_acLayerCfg[layer].m_refLayerIds[i] > layer, "Cannot reference higher layers");
	1887	xConfirmPara(m_acLayerCfg[layer].m_refLayerIds[i] == layer, "Cannot reference the current layer itself");
	1888	}
	1889	}
[269]	1890
	1891	xConfirmPara( (m_acLayerCfg[0].m_numActiveRefLayers != 0) && (m_acLayerCfg[0].m_numActiveRefLayers != -1), "Layer 0 cannot have any active reference layers" );
	1892	// NOTE: m_numActiveRefLayers (for any layer) could be -1 (not signalled in cfg), in which case only the "previous layer" would be taken for reference
	1893	for(Int layer = 1; layer < MAX_LAYERS; layer++)
	1894	{
	1895	xConfirmPara(m_acLayerCfg[layer].m_numActiveRefLayers > m_acLayerCfg[layer].m_numDirectRefLayers, "Cannot reference more layers than NumDirectRefLayers");
	1896	for(Int i = 0; i < m_acLayerCfg[layer].m_numActiveRefLayers; i++)
	1897	{
	1898	xConfirmPara(m_acLayerCfg[layer].m_predLayerIds[i] > m_acLayerCfg[layer].m_numDirectRefLayers, "Cannot reference higher layers");
	1899	}
	1900	}
[191]	1901	#endif
	1902	#undef xConfirmPara
	1903	if (check_failed)
	1904	{
	1905	exit(EXIT_FAILURE);
	1906	}
	1907	}
	1908
	1909	/** \todo use of global variables should be removed later
	1910	*/
	1911	Void TAppEncCfg::xSetGlobal()
	1912	{
	1913	// set max CU width & height
	1914	g_uiMaxCUWidth = m_uiMaxCUWidth;
	1915	g_uiMaxCUHeight = m_uiMaxCUHeight;
	1916
	1917	// compute actual CU depth with respect to config depth and max transform size
	1918	g_uiAddCUDepth = 0;
	1919	while( (m_uiMaxCUWidth>>m_uiMaxCUDepth) > ( 1 << ( m_uiQuadtreeTULog2MinSize + g_uiAddCUDepth ) ) ) g_uiAddCUDepth++;
	1920
	1921	m_uiMaxCUDepth += g_uiAddCUDepth;
	1922	g_uiAddCUDepth++;
	1923	g_uiMaxCUDepth = m_uiMaxCUDepth;
	1924
	1925	// set internal bit-depth and constants
	1926	g_bitDepthY = m_internalBitDepthY;
	1927	g_bitDepthC = m_internalBitDepthC;
	1928
	1929	g_uiPCMBitDepthLuma = m_bPCMInputBitDepthFlag ? m_inputBitDepthY : m_internalBitDepthY;
	1930	g_uiPCMBitDepthChroma = m_bPCMInputBitDepthFlag ? m_inputBitDepthC : m_internalBitDepthC;
	1931	}
	1932
	1933	Void TAppEncCfg::xPrintParameter()
	1934	{
	1935	printf("\n");
	1936	#if SVC_EXTENSION
[245]	1937	printf("Total number of layers : %d\n", m_numLayers );
	1938	printf("Multiview : %d\n", m_scalabilityMask[0] );
	1939	printf("Scalable : %d\n", m_scalabilityMask[1] );
[191]	1940	for(UInt layer=0; layer<m_numLayers; layer++)
	1941	{
	1942	printf("=== Layer %d settings === \n", layer);
	1943	#if AVC_SYNTAX
	1944	m_acLayerCfg[layer].xPrintParameter( layer );
	1945	#else
	1946	m_acLayerCfg[layer].xPrintParameter();
	1947	#endif
	1948	printf("\n");
	1949	}
	1950	printf("=== Common configuration settings === \n");
	1951	printf("Bitstream File : %s\n", m_pBitstreamFile );
	1952	#else
	1953	printf("Input File : %s\n", m_pchInputFile );
	1954	printf("Bitstream File : %s\n", m_pchBitstreamFile );
	1955	printf("Reconstruction File : %s\n", m_pchReconFile );
	1956	printf("Real Format : %dx%d %dHz\n", m_iSourceWidth - m_confLeft - m_confRight, m_iSourceHeight - m_confTop - m_confBottom, m_iFrameRate );
	1957	printf("Internal Format : %dx%d %dHz\n", m_iSourceWidth, m_iSourceHeight, m_iFrameRate );
	1958	#endif
	1959	printf("Frame index : %u - %d (%d frames)\n", m_FrameSkip, m_FrameSkip+m_framesToBeEncoded-1, m_framesToBeEncoded );
	1960	printf("CU size / depth : %d / %d\n", m_uiMaxCUWidth, m_uiMaxCUDepth );
	1961	printf("RQT trans. size (min / max) : %d / %d\n", 1 << m_uiQuadtreeTULog2MinSize, 1 << m_uiQuadtreeTULog2MaxSize );
	1962	printf("Max RQT depth inter : %d\n", m_uiQuadtreeTUMaxDepthInter);
	1963	printf("Max RQT depth intra : %d\n", m_uiQuadtreeTUMaxDepthIntra);
	1964	printf("Min PCM size : %d\n", 1 << m_uiPCMLog2MinSize);
	1965	printf("Motion search range : %d\n", m_iSearchRange );
	1966	#if !SVC_EXTENSION
	1967	printf("Intra period : %d\n", m_iIntraPeriod );
	1968	#endif
	1969	printf("Decoding refresh type : %d\n", m_iDecodingRefreshType );
	1970	#if !SVC_EXTENSION
	1971	printf("QP : %5.2f\n", m_fQP );
	1972	#endif
	1973	printf("Max dQP signaling depth : %d\n", m_iMaxCuDQPDepth);
	1974
	1975	printf("Cb QP Offset : %d\n", m_cbQpOffset );
	1976	printf("Cr QP Offset : %d\n", m_crQpOffset);
	1977
	1978	printf("QP adaptation : %d (range=%d)\n", m_bUseAdaptiveQP, (m_bUseAdaptiveQP ? m_iQPAdaptationRange : 0) );
	1979	printf("GOP size : %d\n", m_iGOPSize );
	1980	printf("Internal bit depth : (Y:%d, C:%d)\n", m_internalBitDepthY, m_internalBitDepthC );
	1981	printf("PCM sample bit depth : (Y:%d, C:%d)\n", g_uiPCMBitDepthLuma, g_uiPCMBitDepthChroma );
	1982	#if RATE_CONTROL_LAMBDA_DOMAIN
[211]	1983	#if !RC_SHVC_HARMONIZATION
[191]	1984	printf("RateControl : %d\n", m_RCEnableRateControl );
	1985	if(m_RCEnableRateControl)
	1986	{
	1987	printf("TargetBitrate : %d\n", m_RCTargetBitrate );
	1988	printf("KeepHierarchicalBit : %d\n", m_RCKeepHierarchicalBit );
	1989	printf("LCULevelRC : %d\n", m_RCLCULevelRC );
	1990	printf("UseLCUSeparateModel : %d\n", m_RCUseLCUSeparateModel );
	1991	printf("InitialQP : %d\n", m_RCInitialQP );
	1992	printf("ForceIntraQP : %d\n", m_RCForceIntraQP );
	1993	}
[211]	1994	#endif
[191]	1995	#else
	1996	printf("RateControl : %d\n", m_enableRateCtrl);
	1997	if(m_enableRateCtrl)
	1998	{
	1999	printf("TargetBitrate : %d\n", m_targetBitrate);
	2000	printf("NumLCUInUnit : %d\n", m_numLCUInUnit);
	2001	}
	2002	#endif
	2003	printf("Max Num Merge Candidates : %d\n", m_maxNumMergeCand);
	2004	printf("\n");
	2005
	2006	printf("TOOL CFG: ");
	2007	printf("IBD:%d ", g_bitDepthY > m_inputBitDepthY \|\| g_bitDepthC > m_inputBitDepthC);
	2008	printf("HAD:%d ", m_bUseHADME );
	2009	printf("SRD:%d ", m_bUseSBACRD );
	2010	printf("RDQ:%d ", m_useRDOQ );
	2011	printf("RDQTS:%d ", m_useRDOQTS );
	2012	#if L0232_RD_PENALTY
	2013	printf("RDpenalty:%d ", m_rdPenalty );
	2014	#endif
	2015	printf("SQP:%d ", m_uiDeltaQpRD );
	2016	printf("ASR:%d ", m_bUseASR );
	2017	#if !L0034_COMBINED_LIST_CLEANUP
	2018	printf("LComb:%d ", m_bUseLComb );
	2019	#endif
	2020	printf("FEN:%d ", m_bUseFastEnc );
	2021	printf("ECU:%d ", m_bUseEarlyCU );
	2022	printf("FDM:%d ", m_useFastDecisionForMerge );
	2023	printf("CFM:%d ", m_bUseCbfFastMode );
	2024	printf("ESD:%d ", m_useEarlySkipDetection );
[212]	2025	#if FAST_INTRA_SHVC
	2026	printf("FIS:%d ", m_useFastIntraScalable );
	2027	#endif
[191]	2028	printf("RQT:%d ", 1 );
	2029	printf("TransformSkip:%d ", m_useTransformSkip );
	2030	printf("TransformSkipFast:%d ", m_useTransformSkipFast );
	2031	printf("Slice: M=%d ", m_sliceMode);
	2032	if (m_sliceMode!=0)
	2033	{
	2034	printf("A=%d ", m_sliceArgument);
	2035	}
	2036	printf("SliceSegment: M=%d ",m_sliceSegmentMode);
	2037	if (m_sliceSegmentMode!=0)
	2038	{
	2039	printf("A=%d ", m_sliceSegmentArgument);
	2040	}
	2041	printf("CIP:%d ", m_bUseConstrainedIntraPred);
	2042	printf("SAO:%d ", (m_bUseSAO)?(1):(0));
	2043	printf("PCM:%d ", (m_usePCM && (1<<m_uiPCMLog2MinSize) <= m_uiMaxCUWidth)? 1 : 0);
	2044	printf("SAOLcuBasedOptimization:%d ", (m_saoLcuBasedOptimization)?(1):(0));
	2045
	2046	printf("LosslessCuEnabled:%d ", (m_useLossless)? 1:0 );
	2047	printf("WPP:%d ", (Int)m_useWeightedPred);
	2048	printf("WPB:%d ", (Int)m_useWeightedBiPred);
	2049	printf("PME:%d ", m_log2ParallelMergeLevel);
	2050	#if !SVC_EXTENSION
	2051	printf(" WaveFrontSynchro:%d WaveFrontSubstreams:%d",
	2052	m_iWaveFrontSynchro, m_iWaveFrontSubstreams);
	2053	#endif
	2054	printf(" ScalingList:%d ", m_useScalingListId );
	2055	printf("TMVPMode:%d ", m_TMVPModeId );
	2056	#if ADAPTIVE_QP_SELECTION
	2057	printf("AQpS:%d", m_bUseAdaptQpSelect );
	2058	#endif
	2059
	2060	printf(" SignBitHidingFlag:%d ", m_signHideFlag);
	2061	#if SVC_EXTENSION
	2062	printf("RecalQP:%d ", m_recalculateQPAccordingToLambda ? 1 : 0 );
	2063	#if AVC_BASE
	2064	printf("AvcBase:%d ", m_avcBaseLayerFlag ? 1 : 0);
	2065	#else
	2066	printf("AvcBase:%d ", 0);
	2067	#endif
	2068	#if REF_IDX_FRAMEWORK
	2069	printf("REF_IDX_FRAMEWORK:%d ", REF_IDX_FRAMEWORK);
	2070	printf("EL_RAP_SliceType: %d ", m_elRapSliceBEnabled);
	2071	printf("REF_IDX_ME_ZEROMV: %d ", REF_IDX_ME_ZEROMV);
	2072	printf("ENCODER_FAST_MODE: %d ", ENCODER_FAST_MODE);
	2073	printf("REF_IDX_MFM: %d ", REF_IDX_MFM);
	2074	#elif INTRA_BL
	2075	printf("INTRA_BL:%d ", INTRA_BL);
	2076	#if !AVC_BASE
	2077	printf("SVC_MVP:%d ", SVC_MVP );
	2078	printf("SVC_BL_CAND_INTRA:%d", SVC_BL_CAND_INTRA );
	2079	#endif
	2080	#endif
	2081	#else
	2082	printf("RecalQP:%d", m_recalculateQPAccordingToLambda ? 1 : 0 );
	2083	#endif
	2084	printf("\n\n");
	2085
	2086	fflush(stdout);
	2087	}
	2088
	2089	Bool confirmPara(Bool bflag, const Char* message)
	2090	{
	2091	if (!bflag)
	2092	return false;
	2093
	2094	printf("Error: %s\n",message);
	2095	return true;
	2096	}
	2097
	2098	//! \}

Note: See TracBrowser for help on using the repository browser.

JCT-VC SHVC

Context navigation

source: SHVCSoftware/branches/SHM-2.1-multilayers-dev/source/App/TAppEncoder/TAppEncCfg.cpp @ 462

Download in other formats: