/* The copyright in this software is being made available under the BSD * License, included below. This software may be subject to other third party * and contributor rights, including patent rights, and no such rights are * granted under this license. * * Copyright (c) 2010-2012, ITU/ISO/IEC * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * Neither the name of the ITU/ISO/IEC nor the names of its contributors may * be used to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ /** \file TAppDecTop.cpp \brief Decoder application class */ #include #include #include #include #include #include "TAppDecTop.h" #include "TLibDecoder/AnnexBread.h" #include "TLibDecoder/NALread.h" //! \ingroup TAppDecoder //! \{ // ==================================================================================================================== // Constructor / destructor / initialization / destroy // ==================================================================================================================== TAppDecTop::TAppDecTop() { ::memset (m_abDecFlag, 0, sizeof (m_abDecFlag)); #if SVC_EXTENSION for(UInt layer=0; layer < MAX_LAYERS; layer++) { m_aiPOCLastDisplay[layer] = -MAX_INT; m_apcTDecTop[layer] = &m_acTDecTop[layer]; } #else m_iPOCLastDisplay = -MAX_INT; #endif } Void TAppDecTop::create() { } Void TAppDecTop::destroy() { if (m_pchBitstreamFile) { free (m_pchBitstreamFile); m_pchBitstreamFile = NULL; } #if SVC_EXTENSION for( Int i = 0; i < m_tgtLayerId; i++ ) { if( m_pchReconFile[i] ) { free ( m_pchReconFile[i] ); m_pchReconFile[i] = NULL; } } #if AVC_BASE if( m_pchBLReconFile ) { free ( m_pchBLReconFile ); m_pchBLReconFile = NULL; } #endif #else if (m_pchReconFile) { free (m_pchReconFile); m_pchReconFile = NULL; } #endif } // ==================================================================================================================== // Public member functions // ==================================================================================================================== /** - create internal class - initialize internal class - until the end of the bitstream, call decoding function in TDecTop class - delete allocated buffers - destroy internal class . */ #if SVC_EXTENSION Void TAppDecTop::decode() { UInt uiPOC; TComList* pcListPic = NULL; ifstream bitstreamFile(m_pchBitstreamFile, ifstream::in | ifstream::binary); if (!bitstreamFile) { fprintf(stderr, "\nfailed to open bitstream file `%s' for reading\n", m_pchBitstreamFile); exit(EXIT_FAILURE); } InputByteStream bytestream(bitstreamFile); // create & initialize internal classes xCreateDecLib(); xInitDecLib (); // main decoder loop bool recon_opened[MAX_LAYERS]; // reconstruction file not yet opened. (must be performed after SPS is seen) for(UInt layer=0; layer<=m_tgtLayerId; layer++) { recon_opened[layer] = false; m_aiPOCLastDisplay[layer] += m_iSkipFrame; // set the last displayed POC correctly for skip forward. } UInt curLayerId = 0; // current layer to be reconstructed #if AVC_BASE TComPic pcBLPic; FILE* pFile = fopen( m_pchBLReconFile, "rb" ); if( !pFile ) { printf( "BL input reading error\n" ); exit(0); } TComList *cListPic = m_acTDecTop[0].getListPic(); m_acTDecTop[0].setBLsize( m_iBLSourceWidth, m_iBLSourceHeight ); m_acTDecTop[0].setBLReconFile( pFile ); pcBLPic.setLayerId( 0 ); cListPic->pushBack( &pcBLPic ); #endif while (!!bitstreamFile) { /* location serves to work around a design fault in the decoder, whereby * the process of reading a new slice that is the first slice of a new frame * requires the TDecTop::decode() method to be called again with the same * nal unit. */ streampos location = bitstreamFile.tellg(); AnnexBStats stats = AnnexBStats(); vector nalUnit; InputNALUnit nalu; byteStreamNALUnit(bytestream, nalUnit, stats); // call actual decoding function bool bNewPicture = false; bool bNewPOC = false; if (nalUnit.empty()) { /* this can happen if the following occur: * - empty input file * - two back-to-back start_code_prefixes * - start_code_prefix immediately followed by EOF */ fprintf(stderr, "Warning: Attempt to decode an empty NAL unit\n"); } else { read(nalu, nalUnit); #if TARGET_DECLAYERID_SET if( (m_iMaxTemporalLayer >= 0 && nalu.m_temporalId > m_iMaxTemporalLayer) || !isNaluWithinTargetDecLayerIdSet(&nalu) || (nalu.m_layerId > m_tgtLayerId) ) #else if(m_iMaxTemporalLayer >= 0 && nalu.m_temporalId > m_iMaxTemporalLayer || (nalu.m_layerId > m_tgtLayerId) ) #endif { bNewPicture = false; } else { bNewPicture = m_acTDecTop[nalu.m_layerId].decode(nalu, m_iSkipFrame, m_aiPOCLastDisplay[nalu.m_layerId], curLayerId, bNewPOC); if (bNewPicture) { bitstreamFile.clear(); /* location points to the current nalunit payload[1] due to the * need for the annexB parser to read three extra bytes. * [1] except for the first NAL unit in the file * (but bNewPicture doesn't happen then) */ bitstreamFile.seekg(location-streamoff(3)); bytestream.reset(); } } } if (bNewPicture || !bitstreamFile) { m_acTDecTop[curLayerId].executeDeblockAndAlf(uiPOC, pcListPic, m_iSkipFrame, m_aiPOCLastDisplay[curLayerId]); } if( pcListPic ) { if ( m_pchReconFile[curLayerId] && !recon_opened[curLayerId] ) { if ( m_outputBitDepth == 0 ) { m_outputBitDepth = g_uiBitDepth + g_uiBitIncrement; } m_acTVideoIOYuvReconFile[curLayerId].open( m_pchReconFile[curLayerId], true, m_outputBitDepth, g_uiBitDepth + g_uiBitIncrement ); // write mode recon_opened[curLayerId] = true; } if ( bNewPicture && bNewPOC && ( nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_IDR #if SUPPORT_FOR_RAP_N_LP || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_IDR_N_LP || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_BLA_N_LP #endif || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_BLANT || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_BLA ) ) { xFlushOutput( pcListPic, curLayerId ); } // write reconstruction to file if(bNewPicture) { xWriteOutput( pcListPic, curLayerId, nalu.m_temporalId ); } } } for(UInt layer = 0; layer <= m_tgtLayerId; layer++) { xFlushOutput( m_acTDecTop[layer].getListPic(), layer ); } // delete buffers #if AVC_BASE if( pFile ) { fclose( pFile ); } pcBLPic.destroy(); for(UInt layer = 1; layer <= m_tgtLayerId; layer++) #else for(UInt layer = 0; layer <= m_tgtLayerId; layer++) #endif { m_acTDecTop[layer].deletePicBuffer(); } // destroy internal classes xDestroyDecLib(); } #else Void TAppDecTop::decode() { UInt uiPOC; TComList* pcListPic = NULL; ifstream bitstreamFile(m_pchBitstreamFile, ifstream::in | ifstream::binary); if (!bitstreamFile) { fprintf(stderr, "\nfailed to open bitstream file `%s' for reading\n", m_pchBitstreamFile); exit(EXIT_FAILURE); } InputByteStream bytestream(bitstreamFile); // create & initialize internal classes xCreateDecLib(); xInitDecLib (); m_iPOCLastDisplay += m_iSkipFrame; // set the last displayed POC correctly for skip forward. // main decoder loop bool recon_opened = false; // reconstruction file not yet opened. (must be performed after SPS is seen) while (!!bitstreamFile) { /* location serves to work around a design fault in the decoder, whereby * the process of reading a new slice that is the first slice of a new frame * requires the TDecTop::decode() method to be called again with the same * nal unit. */ streampos location = bitstreamFile.tellg(); AnnexBStats stats = AnnexBStats(); bool bPreviousPictureDecoded = false; vector nalUnit; InputNALUnit nalu; byteStreamNALUnit(bytestream, nalUnit, stats); // call actual decoding function bool bNewPicture = false; if (nalUnit.empty()) { /* this can happen if the following occur: * - empty input file * - two back-to-back start_code_prefixes * - start_code_prefix immediately followed by EOF */ fprintf(stderr, "Warning: Attempt to decode an empty NAL unit\n"); } else { read(nalu, nalUnit); #if TARGET_DECLAYERID_SET if( (m_iMaxTemporalLayer >= 0 && nalu.m_temporalId > m_iMaxTemporalLayer) || !isNaluWithinTargetDecLayerIdSet(&nalu) ) #else if(m_iMaxTemporalLayer >= 0 && nalu.m_temporalId > m_iMaxTemporalLayer) #endif { if(bPreviousPictureDecoded) { bNewPicture = true; bPreviousPictureDecoded = false; } else { bNewPicture = false; } } else { bNewPicture = m_cTDecTop.decode(nalu, m_iSkipFrame, m_iPOCLastDisplay); if (bNewPicture) { bitstreamFile.clear(); /* location points to the current nalunit payload[1] due to the * need for the annexB parser to read three extra bytes. * [1] except for the first NAL unit in the file * (but bNewPicture doesn't happen then) */ bitstreamFile.seekg(location-streamoff(3)); bytestream.reset(); } bPreviousPictureDecoded = true; } } if (bNewPicture || !bitstreamFile) { m_cTDecTop.executeDeblockAndAlf(uiPOC, pcListPic, m_iSkipFrame, m_iPOCLastDisplay); } if( pcListPic ) { if ( m_pchReconFile && !recon_opened ) { if ( m_outputBitDepth == 0 ) { m_outputBitDepth = g_uiBitDepth + g_uiBitIncrement; } m_cTVideoIOYuvReconFile.open( m_pchReconFile, true, m_outputBitDepth, g_uiBitDepth + g_uiBitIncrement ); // write mode recon_opened = true; } if ( bNewPicture && ( nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_IDR #if SUPPORT_FOR_RAP_N_LP || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_IDR_N_LP || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_BLA_N_LP #endif || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_BLANT || nalu.m_nalUnitType == NAL_UNIT_CODED_SLICE_BLA ) ) { xFlushOutput( pcListPic ); } // write reconstruction to file if(bNewPicture) { xWriteOutput( pcListPic, nalu.m_temporalId ); } } } xFlushOutput( pcListPic ); // delete buffers m_cTDecTop.deletePicBuffer(); // destroy internal classes xDestroyDecLib(); } #endif // ==================================================================================================================== // Protected member functions // ==================================================================================================================== Void TAppDecTop::xCreateDecLib() { #if SVC_EXTENSION // initialize global variables initROM(); for(UInt layer = 0; layer <= m_tgtLayerId; layer++) { // set layer ID m_acTDecTop[layer].setLayerId ( layer ); // create decoder class m_acTDecTop[layer].create(); m_acTDecTop[layer].setLayerDec(m_apcTDecTop); } #else // create decoder class m_cTDecTop.create(); #endif } Void TAppDecTop::xDestroyDecLib() { #if SVC_EXTENSION // destroy ROM destroyROM(); for(UInt layer = 0; layer <= m_tgtLayerId; layer++) { if ( m_pchReconFile[layer] ) { m_acTVideoIOYuvReconFile[layer]. close(); } // destroy decoder class m_acTDecTop[layer].destroy(); } #else if ( m_pchReconFile ) { m_cTVideoIOYuvReconFile. close(); } // destroy decoder class m_cTDecTop.destroy(); #endif } Void TAppDecTop::xInitDecLib() { // initialize decoder class #if SVC_EXTENSION for(UInt layer = 0; layer <= m_tgtLayerId; layer++) { m_acTDecTop[layer].init(); m_acTDecTop[layer].setDecodedPictureHashSEIEnabled(m_decodedPictureHashSEIEnabled); m_acTDecTop[layer].setNumLayer( m_tgtLayerId + 1 ); } #else m_cTDecTop.init(); m_cTDecTop.setDecodedPictureHashSEIEnabled(m_decodedPictureHashSEIEnabled); #endif } /** \param pcListPic list of pictures to be written to file \todo DYN_REF_FREE should be revised */ #if SVC_EXTENSION Void TAppDecTop::xWriteOutput( TComList* pcListPic, UInt layerId, UInt tId ) #else Void TAppDecTop::xWriteOutput( TComList* pcListPic, UInt tId ) #endif { TComList::iterator iterPic = pcListPic->begin(); Int not_displayed = 0; while (iterPic != pcListPic->end()) { TComPic* pcPic = *(iterPic); #if SVC_EXTENSION if(pcPic->getOutputMark() && pcPic->getPOC() > m_aiPOCLastDisplay[layerId]) #else if(pcPic->getOutputMark() && pcPic->getPOC() > m_iPOCLastDisplay) #endif { not_displayed++; } iterPic++; } iterPic = pcListPic->begin(); while (iterPic != pcListPic->end()) { TComPic* pcPic = *(iterPic); TComSPS *sps = pcPic->getSlice(0)->getSPS(); #if SVC_EXTENSION if ( pcPic->getOutputMark() && (not_displayed > pcPic->getSlice(0)->getSPS()->getNumReorderPics(tId) && pcPic->getPOC() > m_aiPOCLastDisplay[layerId])) #else if ( pcPic->getOutputMark() && (not_displayed > pcPic->getSlice(0)->getSPS()->getNumReorderPics(tId) && pcPic->getPOC() > m_iPOCLastDisplay)) #endif { // write to file not_displayed--; #if SVC_EXTENSION if ( m_pchReconFile[layerId] ) { m_acTVideoIOYuvReconFile[layerId].write( pcPic->getPicYuvRec(), sps->getPicCropLeftOffset(), sps->getPicCropRightOffset(), sps->getPicCropTopOffset(), sps->getPicCropBottomOffset() ); } // update POC of display order m_aiPOCLastDisplay[layerId] = pcPic->getPOC(); #else if ( m_pchReconFile ) { m_cTVideoIOYuvReconFile.write( pcPic->getPicYuvRec(), sps->getPicCropLeftOffset(), sps->getPicCropRightOffset(), sps->getPicCropTopOffset(), sps->getPicCropBottomOffset() ); } // update POC of display order m_iPOCLastDisplay = pcPic->getPOC(); #endif // erase non-referenced picture in the reference picture list after display if ( !pcPic->getSlice(0)->isReferenced() && pcPic->getReconMark() == true ) { #if !DYN_REF_FREE pcPic->setReconMark(false); // mark it should be extended later pcPic->getPicYuvRec()->setBorderExtension( false ); #else pcPic->destroy(); pcListPic->erase( iterPic ); iterPic = pcListPic->begin(); // to the beginning, non-efficient way, have to be revised! continue; #endif } pcPic->setOutputMark(false); } iterPic++; } } /** \param pcListPic list of pictures to be written to file \todo DYN_REF_FREE should be revised */ #if SVC_EXTENSION Void TAppDecTop::xFlushOutput( TComList* pcListPic, UInt layerId ) #else Void TAppDecTop::xFlushOutput( TComList* pcListPic ) #endif { if(!pcListPic) { return; } TComList::iterator iterPic = pcListPic->begin(); iterPic = pcListPic->begin(); while (iterPic != pcListPic->end()) { TComPic* pcPic = *(iterPic); TComSPS *sps = pcPic->getSlice(0)->getSPS(); if ( pcPic->getOutputMark() ) { // write to file #if SVC_EXTENSION if ( m_pchReconFile[layerId] ) { m_acTVideoIOYuvReconFile[layerId].write( pcPic->getPicYuvRec(), sps->getPicCropLeftOffset(), sps->getPicCropRightOffset(), sps->getPicCropTopOffset(), sps->getPicCropBottomOffset() ); } // update POC of display order m_aiPOCLastDisplay[layerId] = pcPic->getPOC(); #else if ( m_pchReconFile ) { m_cTVideoIOYuvReconFile.write( pcPic->getPicYuvRec(), sps->getPicCropLeftOffset(), sps->getPicCropRightOffset(), sps->getPicCropTopOffset(), sps->getPicCropBottomOffset() ); } // update POC of display order m_iPOCLastDisplay = pcPic->getPOC(); #endif // erase non-referenced picture in the reference picture list after display if ( !pcPic->getSlice(0)->isReferenced() && pcPic->getReconMark() == true ) { #if !DYN_REF_FREE pcPic->setReconMark(false); // mark it should be extended later pcPic->getPicYuvRec()->setBorderExtension( false ); #else pcPic->destroy(); pcListPic->erase( iterPic ); iterPic = pcListPic->begin(); // to the beginning, non-efficient way, have to be revised! continue; #endif } pcPic->setOutputMark(false); } #if !SVC_EXTENSION #if !DYN_REF_FREE if(pcPic) { pcPic->destroy(); delete pcPic; pcPic = NULL; } #endif #endif iterPic++; } #if SVC_EXTENSION m_aiPOCLastDisplay[layerId] = -MAX_INT; #else pcListPic->clear(); //k Cannot be cleared here. Otherwise, pictures will never be destroyed. m_iPOCLastDisplay = -MAX_INT; #endif } #if TARGET_DECLAYERID_SET /** \param nalu Input nalu to check whether its LayerId is within targetDecLayerIdSet */ Bool TAppDecTop::isNaluWithinTargetDecLayerIdSet( InputNALUnit* nalu ) { if ( m_targetDecLayerIdSet.size() == 0 ) // By default, the set is empty, meaning all LayerIds are allowed { return true; } for (std::vector::iterator it = m_targetDecLayerIdSet.begin(); it != m_targetDecLayerIdSet.end(); it++) { if ( nalu->m_reservedZero6Bits == (*it) ) { return true; } } return false; } #endif //! \}