Context navigation

TAppEncCfg.cpp @ 1606

Visit:

Last change on this file since 1606 was 118, checked in by qualcomm, 12 years ago

Signaling direct reference layers in VPS extension (MACRO: VPS_EXTN_DIRECT_REF_LAYERS)

Includes signaling of direct_dependency_flag in VPS extension, that indicates the direct reference layers of all the layers. Includes configuration file support using NumDirectRefLayers%d and RefLayerIds%d. Arbitrary values of nuh_layer_id for different layers would still need configuration file support for layer_id_in_nuh.

From: Adarsh K. Ramasubramonian <aramasub@…>

File size: 81.8 KB

Rev	Line
[51]	1	/* The copyright in this software is being made available under the BSD
	2	* License, included below. This software may be subject to other third party
	3	* and contributor rights, including patent rights, and no such rights are
	4	* granted under this license.
	5	*
	6	* Copyright (c) 2010-2013, ITU/ISO/IEC
	7	* All rights reserved.
	8	*
	9	* Redistribution and use in source and binary forms, with or without
	10	* modification, are permitted provided that the following conditions are met:
	11	*
	12	* * Redistributions of source code must retain the above copyright notice,
	13	* this list of conditions and the following disclaimer.
	14	* * Redistributions in binary form must reproduce the above copyright notice,
	15	* this list of conditions and the following disclaimer in the documentation
	16	* and/or other materials provided with the distribution.
	17	* * Neither the name of the ITU/ISO/IEC nor the names of its contributors may
	18	* be used to endorse or promote products derived from this software without
	19	* specific prior written permission.
	20	*
	21	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	22	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	23	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	24	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS
	25	* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	26	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	27	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	28	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	29	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	30	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
	31	* THE POSSIBILITY OF SUCH DAMAGE.
	32	*/
	33
	34	/** \file TAppEncCfg.cpp
	35	\brief Handle encoder configuration parameters
	36	*/
	37
	38	#include <stdlib.h>
	39	#include <cassert>
	40	#include <cstring>
	41	#include <string>
	42	#include "TLibCommon/TComRom.h"
	43	#include "TAppEncCfg.h"
	44
	45	static istream& operator>>(istream &, Level::Name &);
	46	static istream& operator>>(istream &, Level::Tier &);
	47	static istream& operator>>(istream &, Profile::Name &);
	48
	49	#include "TAppCommon/program_options_lite.h"
	50	#include "TLibEncoder/TEncRateCtrl.h"
	51	#ifdef WIN32
	52	#define strdup _strdup
	53	#endif
	54
	55	using namespace std;
	56	namespace po = df::program_options_lite;
	57
	58	//! \ingroup TAppEncoder
	59	//! \{
	60
	61	// ====================================================================================================================
	62	// Constructor / destructor / initialization / destroy
	63	// ====================================================================================================================
	64
[54]	65	#if SVC_EXTENSION
[51]	66	TAppEncCfg::TAppEncCfg()
[54]	67	: m_pBitstreamFile()
	68	, m_pColumnWidth()
	69	, m_pRowHeight()
	70	, m_scalingListFile()
	71	#if REF_IDX_FRAMEWORK
	72	, m_elRapSliceBEnabled(0)
	73	#endif
	74	{
	75	for(UInt layer=0; layer<MAX_LAYERS; layer++)
	76	{
	77	m_acLayerCfg[layer].setAppEncCfg(this);
	78	}
	79	}
	80	#else
	81	TAppEncCfg::TAppEncCfg()
[51]	82	: m_pchInputFile()
	83	, m_pchBitstreamFile()
	84	, m_pchReconFile()
	85	, m_pchdQPFile()
	86	, m_pColumnWidth()
	87	, m_pRowHeight()
	88	, m_scalingListFile()
	89	{
	90	m_aidQP = NULL;
	91	}
[54]	92	#endif
[51]	93
	94	TAppEncCfg::~TAppEncCfg()
	95	{
[56]	96	#if SVC_EXTENSION
	97	free(m_pBitstreamFile);
	98	#else
	99	free(m_pchBitstreamFile);
[51]	100	if ( m_aidQP )
	101	{
	102	delete[] m_aidQP;
	103	}
	104	free(m_pchInputFile);
[54]	105	#endif
	106	#if !SVC_EXTENSION
[51]	107	free(m_pchReconFile);
	108	free(m_pchdQPFile);
[54]	109	#endif
[51]	110	free(m_pColumnWidth);
	111	free(m_pRowHeight);
	112	free(m_scalingListFile);
	113	}
	114
	115	Void TAppEncCfg::create()
	116	{
	117	}
	118
	119	Void TAppEncCfg::destroy()
	120	{
	121	}
	122
	123	std::istringstream &operator>>(std::istringstream &in, GOPEntry &entry) //input
	124	{
	125	in>>entry.m_sliceType;
	126	in>>entry.m_POC;
	127	in>>entry.m_QPOffset;
	128	in>>entry.m_QPFactor;
	129	in>>entry.m_tcOffsetDiv2;
	130	in>>entry.m_betaOffsetDiv2;
	131	in>>entry.m_temporalId;
	132	in>>entry.m_numRefPicsActive;
	133	in>>entry.m_numRefPics;
	134	for ( Int i = 0; i < entry.m_numRefPics; i++ )
	135	{
	136	in>>entry.m_referencePics[i];
	137	}
	138	in>>entry.m_interRPSPrediction;
	139	#if AUTO_INTER_RPS
	140	if (entry.m_interRPSPrediction==1)
	141	{
	142	in>>entry.m_deltaRPS;
	143	in>>entry.m_numRefIdc;
	144	for ( Int i = 0; i < entry.m_numRefIdc; i++ )
	145	{
	146	in>>entry.m_refIdc[i];
	147	}
	148	}
	149	else if (entry.m_interRPSPrediction==2)
	150	{
	151	in>>entry.m_deltaRPS;
	152	}
	153	#else
	154	if (entry.m_interRPSPrediction)
	155	{
	156	in>>entry.m_deltaRPS;
	157	in>>entry.m_numRefIdc;
	158	for ( Int i = 0; i < entry.m_numRefIdc; i++ )
	159	{
	160	in>>entry.m_refIdc[i];
	161	}
	162	}
	163	#endif
	164	return in;
	165	}
	166
[54]	167	#if SVC_EXTENSION
	168	void TAppEncCfg::getDirFilename(string& filename, string& dir, const string path)
	169	{
	170	size_t pos = path.find_last_of("\\");
	171	if(pos != std::string::npos)
	172	{
	173	filename.assign(path.begin() + pos + 1, path.end());
	174	dir.assign(path.begin(), path.begin() + pos + 1);
	175	}
	176	else
	177	{
	178	pos = path.find_last_of("/");
	179	if(pos != std::string::npos)
	180	{
	181	filename.assign(path.begin() + pos + 1, path.end());
	182	dir.assign(path.begin(), path.begin() + pos + 1);
	183	}
	184	else
	185	{
	186	filename = path;
	187	dir.assign("");
	188	}
	189	}
	190	}
	191	#endif
	192
[51]	193	static const struct MapStrToProfile {
	194	const Char* str;
	195	Profile::Name value;
	196	} strToProfile[] = {
	197	{"none", Profile::NONE},
	198	{"main", Profile::MAIN},
	199	{"main10", Profile::MAIN10},
	200	{"main-still-picture", Profile::MAINSTILLPICTURE},
	201	};
	202
	203	static const struct MapStrToTier {
	204	const Char* str;
	205	Level::Tier value;
	206	} strToTier[] = {
	207	{"main", Level::MAIN},
	208	{"high", Level::HIGH},
	209	};
	210
	211	static const struct MapStrToLevel {
	212	const Char* str;
	213	Level::Name value;
	214	} strToLevel[] = {
	215	{"none",Level::NONE},
	216	{"1", Level::LEVEL1},
	217	{"2", Level::LEVEL2},
	218	{"2.1", Level::LEVEL2_1},
	219	{"3", Level::LEVEL3},
	220	{"3.1", Level::LEVEL3_1},
	221	{"4", Level::LEVEL4},
	222	{"4.1", Level::LEVEL4_1},
	223	{"5", Level::LEVEL5},
	224	{"5.1", Level::LEVEL5_1},
	225	{"5.2", Level::LEVEL5_2},
	226	{"6", Level::LEVEL6},
	227	{"6.1", Level::LEVEL6_1},
	228	{"6.2", Level::LEVEL6_2},
	229	};
	230
	231	template<typename T, typename P>
	232	static istream& readStrToEnum(P map[], unsigned long mapLen, istream &in, T &val)
	233	{
	234	string str;
	235	in >> str;
	236
	237	for (Int i = 0; i < mapLen; i++)
	238	{
	239	if (str == map[i].str)
	240	{
	241	val = map[i].value;
	242	goto found;
	243	}
	244	}
	245	/* not found */
	246	in.setstate(ios::failbit);
	247	found:
	248	return in;
	249	}
	250
	251	static istream& operator>>(istream &in, Profile::Name &profile)
	252	{
	253	return readStrToEnum(strToProfile, sizeof(strToProfile)/sizeof(*strToProfile), in, profile);
	254	}
	255
	256	static istream& operator>>(istream &in, Level::Tier &tier)
	257	{
	258	return readStrToEnum(strToTier, sizeof(strToTier)/sizeof(*strToTier), in, tier);
	259	}
	260
	261	static istream& operator>>(istream &in, Level::Name &level)
	262	{
	263	return readStrToEnum(strToLevel, sizeof(strToLevel)/sizeof(*strToLevel), in, level);
	264	}
	265
	266	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	267	Void readBoolString(const string inpString, const Int numEntries, Bool* &memberArray, const char *elementName);
	268	Void readIntString(const string inpString, const Int numEntries, Int* &memberArray, const char *elementName);
	269	#endif
	270	// ====================================================================================================================
	271	// Public member functions
	272	// ====================================================================================================================
	273
	274	/** \param argc number of arguments
	275	\param argv array of arguments
	276	\retval true when success
	277	*/
	278	Bool TAppEncCfg::parseCfg( Int argc, Char* argv[] )
	279	{
	280	Bool do_help = false;
	281
[54]	282	#if SVC_EXTENSION
	283	string cfg_LayerCfgFile [MAX_LAYERS];
	284	string cfg_BitstreamFile;
	285	string* cfg_InputFile [MAX_LAYERS];
	286	string* cfg_ReconFile [MAX_LAYERS];
	287	Double* cfg_fQP [MAX_LAYERS];
	288
	289	Int* cfg_SourceWidth [MAX_LAYERS];
	290	Int* cfg_SourceHeight [MAX_LAYERS];
	291	Int* cfg_FrameRate [MAX_LAYERS];
	292	Int* cfg_IntraPeriod [MAX_LAYERS];
	293	Int* cfg_conformanceMode [MAX_LAYERS];
[118]	294	#if VPS_EXTN_DIRECT_REF_LAYERS
	295	Int* cfg_numDirectRefLayers [MAX_LAYERS];
	296	string cfg_refLayerIds [MAX_LAYERS];
	297	string* cfg_refLayerIdsPtr [MAX_LAYERS];
	298	#endif
[54]	299	for(UInt layer = 0; layer < MAX_LAYERS; layer++)
	300	{
	301	cfg_InputFile[layer] = &m_acLayerCfg[layer].m_cInputFile;
	302	cfg_ReconFile[layer] = &m_acLayerCfg[layer].m_cReconFile;
	303	cfg_fQP[layer] = &m_acLayerCfg[layer].m_fQP;
	304	cfg_SourceWidth[layer] = &m_acLayerCfg[layer].m_iSourceWidth;
	305	cfg_SourceHeight[layer] = &m_acLayerCfg[layer].m_iSourceHeight;
	306	cfg_FrameRate[layer] = &m_acLayerCfg[layer].m_iFrameRate;
	307	cfg_IntraPeriod[layer] = &m_acLayerCfg[layer].m_iIntraPeriod;
	308	cfg_conformanceMode[layer] = &m_acLayerCfg[layer].m_conformanceMode;
[118]	309	#if VPS_EXTN_DIRECT_REF_LAYERS
	310	cfg_numDirectRefLayers [layer] = &m_acLayerCfg[layer].m_numDirectRefLayers;
	311	cfg_refLayerIdsPtr [layer] = &cfg_refLayerIds[layer];
	312	#endif
[54]	313	}
	314	#if AVC_SYNTAX
	315	string cfg_BLSyntaxFile;
	316	#endif
	317	#else
[51]	318	string cfg_InputFile;
	319	string cfg_BitstreamFile;
	320	string cfg_ReconFile;
	321	string cfg_dQPFile;
[54]	322	#endif
[51]	323	string cfg_ColumnWidth;
	324	string cfg_RowHeight;
	325	string cfg_ScalingListFile;
	326	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	327	string cfg_bitRateInfoPresentFlag;
	328	string cfg_picRateInfoPresentFlag;
	329	string cfg_avgBitRate;
	330	string cfg_maxBitRate;
	331	string cfg_avgPicRate;
	332	string cfg_constantPicRateIdc;
	333	#endif
	334	po::Options opts;
	335	opts.addOptions()
	336	("help", do_help, false, "this help text")
	337	("c", po::parseConfigFile, "configuration file name")
	338
	339	// File, I/O and source parameters
[54]	340	#if SVC_EXTENSION
	341	("InputFile%d,-i%d", cfg_InputFile, string(""), MAX_LAYERS, "original YUV input file name for layer %d")
	342	("ReconFile%d,-o%d", cfg_ReconFile, string(""), MAX_LAYERS, "reconstruction YUV input file name for layer %d")
	343	("LayerConfig%d,-lc%d", cfg_LayerCfgFile, string(""), MAX_LAYERS, "layer %d configuration file name")
	344	("SourceWidth%d,-wdt%d", cfg_SourceWidth, 0, MAX_LAYERS, "Source picture width for layer %d")
	345	("SourceHeight%d,-hgt%d", cfg_SourceHeight, 0, MAX_LAYERS, "Source picture height for layer %d")
	346	("FrameRate%d,-fr%d", cfg_FrameRate, 0, MAX_LAYERS, "Frame rate for layer %d")
	347	("LambdaModifier%d,-LM%d", m_adLambdaModifier, ( double )1.0, MAX_TLAYER, "Lambda modifier for temporal layer %d")
[118]	348	#if VPS_EXTN_DIRECT_REF_LAYERS
	349	("NumDirectRefLayers%d", cfg_numDirectRefLayers, -1, MAX_LAYERS, "Number of direct reference layers")
	350	("RefLayerIds%d", cfg_refLayerIdsPtr, string(""), MAX_LAYERS, "direct reference layer IDs")
	351	#endif
[54]	352	("NumLayers", m_numLayers, 1, "Number of layers to code")
	353	("ConformanceMode%d", cfg_conformanceMode,0, MAX_LAYERS, "Window conformance mode (0: no cropping, 1:automatic padding, 2: padding, 3:cropping")
	354
	355	("BitstreamFile,b", cfg_BitstreamFile, string(""), "Bitstream output file name")
	356	("InputBitDepth", m_inputBitDepthY, 8, "Bit-depth of input file")
	357	("OutputBitDepth", m_outputBitDepthY, 0, "Bit-depth of output file (default:InternalBitDepth)")
	358	("InternalBitDepth", m_internalBitDepthY, 0, "Bit-depth the codec operates at. (default:InputBitDepth)"
	359	"If different to InputBitDepth, source data will be converted")
	360	("InputBitDepthC", m_inputBitDepthC, 0, "As per InputBitDepth but for chroma component. (default:InputBitDepth)")
	361	("OutputBitDepthC", m_outputBitDepthC, 0, "As per OutputBitDepth but for chroma component. (default:InternalBitDepthC)")
	362	("InternalBitDepthC", m_internalBitDepthC, 0, "As per InternalBitDepth but for chroma component. (default:IntrenalBitDepth)")
	363
	364	#if AVC_BASE
	365	("InputBLFile,-ibl", *cfg_InputFile[0], string(""), "Base layer rec YUV input file name")
	366	#if AVC_SYNTAX
	367	("InputBLSyntaxFile,-ibs", cfg_BLSyntaxFile, string(""), "Base layer syntax input file name")
	368	#endif
	369	#endif
	370	#if REF_IDX_FRAMEWORK
	371	("EnableElRapB,-use-rap-b", m_elRapSliceBEnabled, 0, "Set ILP over base-layer I picture to B picture (default is P picture_")
	372	#endif
	373	#else
[51]	374	("InputFile,i", cfg_InputFile, string(""), "Original YUV input file name")
	375	("BitstreamFile,b", cfg_BitstreamFile, string(""), "Bitstream output file name")
	376	("ReconFile,o", cfg_ReconFile, string(""), "Reconstructed YUV output file name")
	377	("SourceWidth,-wdt", m_iSourceWidth, 0, "Source picture width")
	378	("SourceHeight,-hgt", m_iSourceHeight, 0, "Source picture height")
	379	("InputBitDepth", m_inputBitDepthY, 8, "Bit-depth of input file")
	380	("OutputBitDepth", m_outputBitDepthY, 0, "Bit-depth of output file (default:InternalBitDepth)")
	381	("InternalBitDepth", m_internalBitDepthY, 0, "Bit-depth the codec operates at. (default:InputBitDepth)"
	382	"If different to InputBitDepth, source data will be converted")
	383	("InputBitDepthC", m_inputBitDepthC, 0, "As per InputBitDepth but for chroma component. (default:InputBitDepth)")
	384	("OutputBitDepthC", m_outputBitDepthC, 0, "As per OutputBitDepth but for chroma component. (default:InternalBitDepthC)")
	385	("InternalBitDepthC", m_internalBitDepthC, 0, "As per InternalBitDepth but for chroma component. (default:IntrenalBitDepth)")
	386	("ConformanceMode", m_conformanceMode, 0, "Window conformance mode (0: no window, 1:automatic padding, 2:padding, 3:conformance")
	387	("HorizontalPadding,-pdx",m_aiPad[0], 0, "Horizontal source padding for conformance window mode 2")
	388	("VerticalPadding,-pdy", m_aiPad[1], 0, "Vertical source padding for conformance window mode 2")
	389	("ConfLeft", m_confLeft, 0, "Left offset for window conformance mode 3")
	390	("ConfRight", m_confRight, 0, "Right offset for window conformance mode 3")
	391	("ConfTop", m_confTop, 0, "Top offset for window conformance mode 3")
	392	("ConfBottom", m_confBottom, 0, "Bottom offset for window conformance mode 3")
	393	("FrameRate,-fr", m_iFrameRate, 0, "Frame rate")
[54]	394	#endif
[51]	395	("FrameSkip,-fs", m_FrameSkip, 0u, "Number of frames to skip at start of input YUV")
	396	("FramesToBeEncoded,f", m_framesToBeEncoded, 0, "Number of frames to be encoded (default=all)")
	397
	398	// Profile and level
	399	("Profile", m_profile, Profile::NONE, "Profile to be used when encoding (Incomplete)")
	400	("Level", m_level, Level::NONE, "Level limit to be used, eg 5.1 (Incomplete)")
	401	("Tier", m_levelTier, Level::MAIN, "Tier to use for interpretation of --Level")
	402
	403	#if L0046_CONSTRAINT_FLAGS
	404	("ProgressiveSource", m_progressiveSourceFlag, false, "Indicate that source is progressive")
	405	("InterlacedSource", m_interlacedSourceFlag, false, "Indicate that source is interlaced")
	406	("NonPackedSource", m_nonPackedConstraintFlag, false, "Indicate that source does not contain frame packing")
	407	("FrameOnly", m_frameOnlyConstraintFlag, false, "Indicate that the bitstream contains only frames")
	408	#endif
[54]	409
[51]	410	// Unit definition parameters
	411	("MaxCUWidth", m_uiMaxCUWidth, 64u)
	412	("MaxCUHeight", m_uiMaxCUHeight, 64u)
	413	// todo: remove defaults from MaxCUSize
	414	("MaxCUSize,s", m_uiMaxCUWidth, 64u, "Maximum CU size")
	415	("MaxCUSize,s", m_uiMaxCUHeight, 64u, "Maximum CU size")
	416	("MaxPartitionDepth,h", m_uiMaxCUDepth, 4u, "CU depth")
	417
	418	("QuadtreeTULog2MaxSize", m_uiQuadtreeTULog2MaxSize, 6u, "Maximum TU size in logarithm base 2")
	419	("QuadtreeTULog2MinSize", m_uiQuadtreeTULog2MinSize, 2u, "Minimum TU size in logarithm base 2")
	420
	421	("QuadtreeTUMaxDepthIntra", m_uiQuadtreeTUMaxDepthIntra, 1u, "Depth of TU tree for intra CUs")
	422	("QuadtreeTUMaxDepthInter", m_uiQuadtreeTUMaxDepthInter, 2u, "Depth of TU tree for inter CUs")
	423
	424	// Coding structure paramters
[54]	425	#if SVC_EXTENSION
	426	("IntraPeriod%d,-ip%d", cfg_IntraPeriod, -1, MAX_LAYERS, "intra period in frames for layer %d, (-1: only first frame)")
	427	#else
[51]	428	("IntraPeriod,-ip", m_iIntraPeriod, -1, "Intra period in frames, (-1: only first frame)")
[54]	429	#endif
[51]	430	("DecodingRefreshType,-dr", m_iDecodingRefreshType, 0, "Intra refresh type (0:none 1:CRA 2:IDR)")
	431	("GOPSize,g", m_iGOPSize, 1, "GOP size of temporal structure")
	432	("ListCombination,-lc", m_bUseLComb, true, "Combined reference list for uni-prediction estimation in B-slices")
	433	// motion options
	434	("FastSearch", m_iFastSearch, 1, "0:Full search 1:Diamond 2:PMVFAST")
	435	("SearchRange,-sr", m_iSearchRange, 96, "Motion search range")
	436	("BipredSearchRange", m_bipredSearchRange, 4, "Motion search range for bipred refinement")
	437	("HadamardME", m_bUseHADME, true, "Hadamard ME for fractional-pel")
	438	("ASR", m_bUseASR, false, "Adaptive motion search range")
	439
[54]	440	#if SVC_EXTENSION
	441	("LambdaModifier%d,-LM%d", m_adLambdaModifier, ( double )1.0, MAX_TLAYER, "Lambda modifier for temporal layer %d")
	442	#else
[51]	443	// Mode decision parameters
	444	("LambdaModifier0,-LM0", m_adLambdaModifier[ 0 ], ( Double )1.0, "Lambda modifier for temporal layer 0")
	445	("LambdaModifier1,-LM1", m_adLambdaModifier[ 1 ], ( Double )1.0, "Lambda modifier for temporal layer 1")
	446	("LambdaModifier2,-LM2", m_adLambdaModifier[ 2 ], ( Double )1.0, "Lambda modifier for temporal layer 2")
	447	("LambdaModifier3,-LM3", m_adLambdaModifier[ 3 ], ( Double )1.0, "Lambda modifier for temporal layer 3")
	448	("LambdaModifier4,-LM4", m_adLambdaModifier[ 4 ], ( Double )1.0, "Lambda modifier for temporal layer 4")
	449	("LambdaModifier5,-LM5", m_adLambdaModifier[ 5 ], ( Double )1.0, "Lambda modifier for temporal layer 5")
	450	("LambdaModifier6,-LM6", m_adLambdaModifier[ 6 ], ( Double )1.0, "Lambda modifier for temporal layer 6")
	451	("LambdaModifier7,-LM7", m_adLambdaModifier[ 7 ], ( Double )1.0, "Lambda modifier for temporal layer 7")
[54]	452	#endif
[51]	453
	454	/* Quantization parameters */
[54]	455	#if SVC_EXTENSION
	456	("QP%d,-q%d", cfg_fQP, 30.0, MAX_LAYERS, "Qp value for layer %d, if value is float, QP is switched once during encoding")
	457	#else
[51]	458	("QP,q", m_fQP, 30.0, "Qp value, if value is float, QP is switched once during encoding")
[54]	459	#endif
[51]	460	("DeltaQpRD,-dqr",m_uiDeltaQpRD, 0u, "max dQp offset for slice")
	461	("MaxDeltaQP,d", m_iMaxDeltaQP, 0, "max dQp offset for block")
	462	("MaxCuDQPDepth,-dqd", m_iMaxCuDQPDepth, 0, "max depth for a minimum CuDQP")
	463
	464	("CbQpOffset,-cbqpofs", m_cbQpOffset, 0, "Chroma Cb QP Offset")
	465	("CrQpOffset,-crqpofs", m_crQpOffset, 0, "Chroma Cr QP Offset")
	466
	467	#if ADAPTIVE_QP_SELECTION
	468	("AdaptiveQpSelection,-aqps", m_bUseAdaptQpSelect, false, "AdaptiveQpSelection")
	469	#endif
	470
	471	("AdaptiveQP,-aq", m_bUseAdaptiveQP, false, "QP adaptation based on a psycho-visual model")
	472	("MaxQPAdaptationRange,-aqr", m_iQPAdaptationRange, 6, "QP adaptation range")
[54]	473	#if !SVC_EXTENSION
[51]	474	("dQPFile,m", cfg_dQPFile, string(""), "dQP file name")
[54]	475	#endif
[51]	476	("RDOQ", m_useRDOQ, true )
	477	("RDOQTS", m_useRDOQTS, true )
	478	#if L0232_RD_PENALTY
	479	("RDpenalty", m_rdPenalty, 0, "RD-penalty for 32x32 TU for intra in non-intra slices. 0:disbaled 1:RD-penalty 2:maximum RD-penalty")
	480	#endif
	481	// Entropy coding parameters
	482	("SBACRD", m_bUseSBACRD, true, "SBAC based RD estimation")
	483
	484	// Deblocking filter parameters
	485	("LoopFilterDisable", m_bLoopFilterDisable, false )
	486	("LoopFilterOffsetInPPS", m_loopFilterOffsetInPPS, false )
	487	("LoopFilterBetaOffset_div2", m_loopFilterBetaOffsetDiv2, 0 )
	488	("LoopFilterTcOffset_div2", m_loopFilterTcOffsetDiv2, 0 )
	489	("DeblockingFilterControlPresent", m_DeblockingFilterControlPresent, false )
	490
	491	// Coding tools
	492	("AMP", m_enableAMP, true, "Enable asymmetric motion partitions")
	493	("TransformSkip", m_useTransformSkip, false, "Intra transform skipping")
	494	("TransformSkipFast", m_useTransformSkipFast, false, "Fast intra transform skipping")
	495	("SAO", m_bUseSAO, true, "Enable Sample Adaptive Offset")
	496	("MaxNumOffsetsPerPic", m_maxNumOffsetsPerPic, 2048, "Max number of SAO offset per picture (Default: 2048)")
	497	("SAOLcuBoundary", m_saoLcuBoundary, false, "0: right/bottom LCU boundary areas skipped from SAO parameter estimation, 1: non-deblocked pixels are used for those areas")
	498	("SAOLcuBasedOptimization", m_saoLcuBasedOptimization, true, "0: SAO picture-based optimization, 1: SAO LCU-based optimization ")
	499	("SliceMode", m_sliceMode, 0, "0: Disable all Recon slice limits, 1: Enforce max # of LCUs, 2: Enforce max # of bytes, 3:specify tiles per dependent slice")
	500	("SliceArgument", m_sliceArgument, 0, "Depending on SliceMode being:"
	501	"\t1: max number of CTUs per slice"
	502	"\t2: max number of bytes per slice"
	503	"\t3: max number of tiles per slice")
	504	("SliceSegmentMode", m_sliceSegmentMode, 0, "0: Disable all slice segment limits, 1: Enforce max # of LCUs, 2: Enforce max # of bytes, 3:specify tiles per dependent slice")
	505	("SliceSegmentArgument", m_sliceSegmentArgument, 0, "Depending on SliceSegmentMode being:"
	506	"\t1: max number of CTUs per slice segment"
	507	"\t2: max number of bytes per slice segment"
	508	"\t3: max number of tiles per slice segment")
	509	("LFCrossSliceBoundaryFlag", m_bLFCrossSliceBoundaryFlag, true)
	510
	511	("ConstrainedIntraPred", m_bUseConstrainedIntraPred, false, "Constrained Intra Prediction")
	512
	513	("PCMEnabledFlag", m_usePCM, false)
	514	("PCMLog2MaxSize", m_pcmLog2MaxSize, 5u)
	515	("PCMLog2MinSize", m_uiPCMLog2MinSize, 3u)
	516	("PCMInputBitDepthFlag", m_bPCMInputBitDepthFlag, true)
	517	("PCMFilterDisableFlag", m_bPCMFilterDisableFlag, false)
	518
	519	("LosslessCuEnabled", m_useLossless, false)
	520
	521	("WeightedPredP,-wpP", m_useWeightedPred, false, "Use weighted prediction in P slices")
	522	("WeightedPredB,-wpB", m_useWeightedBiPred, false, "Use weighted (bidirectional) prediction in B slices")
	523	("Log2ParallelMergeLevel", m_log2ParallelMergeLevel, 2u, "Parallel merge estimation region")
	524	("UniformSpacingIdc", m_iUniformSpacingIdr, 0, "Indicates if the column and row boundaries are distributed uniformly")
	525	("NumTileColumnsMinus1", m_iNumColumnsMinus1, 0, "Number of columns in a picture minus 1")
	526	("ColumnWidthArray", cfg_ColumnWidth, string(""), "Array containing ColumnWidth values in units of LCU")
	527	("NumTileRowsMinus1", m_iNumRowsMinus1, 0, "Number of rows in a picture minus 1")
	528	("RowHeightArray", cfg_RowHeight, string(""), "Array containing RowHeight values in units of LCU")
	529	("LFCrossTileBoundaryFlag", m_bLFCrossTileBoundaryFlag, true, "1: cross-tile-boundary loop filtering. 0:non-cross-tile-boundary loop filtering")
	530	("WaveFrontSynchro", m_iWaveFrontSynchro, 0, "0: no synchro; 1 synchro with TR; 2 TRR etc")
	531	("ScalingList", m_useScalingListId, 0, "0: no scaling list, 1: default scaling lists, 2: scaling lists specified in ScalingListFile")
	532	("ScalingListFile", cfg_ScalingListFile, string(""), "Scaling list file name")
	533	("SignHideFlag,-SBH", m_signHideFlag, 1)
	534	("MaxNumMergeCand", m_maxNumMergeCand, 5u, "Maximum number of merge candidates")
	535
	536	/* Misc. */
	537	("SEIDecodedPictureHash", m_decodedPictureHashSEIEnabled, 0, "Control generation of decode picture hash SEI messages\n"
	538	"\t3: checksum\n"
	539	"\t2: CRC\n"
	540	"\t1: use MD5\n"
	541	"\t0: disable")
	542	("SEIpictureDigest", m_decodedPictureHashSEIEnabled, 0, "deprecated alias for SEIDecodedPictureHash")
	543	("TMVPMode", m_TMVPModeId, 1, "TMVP mode 0: TMVP disable for all slices. 1: TMVP enable for all slices (default) 2: TMVP enable for certain slices only")
	544	("FEN", m_bUseFastEnc, false, "fast encoder setting")
	545	("ECU", m_bUseEarlyCU, false, "Early CU setting")
	546	("FDM", m_useFastDecisionForMerge, true, "Fast decision for Merge RD Cost")
	547	("CFM", m_bUseCbfFastMode, false, "Cbf fast mode setting")
	548	("ESD", m_useEarlySkipDetection, false, "Early SKIP detection setting")
	549	#if RATE_CONTROL_LAMBDA_DOMAIN
	550	( "RateControl", m_RCEnableRateControl, false, "Rate control: enable rate control" )
	551	( "TargetBitrate", m_RCTargetBitrate, 0, "Rate control: target bitrate" )
	552	( "KeepHierarchicalBit", m_RCKeepHierarchicalBit, false, "Rate control: keep hierarchical bit allocation in rate control algorithm" )
	553	( "LCULevelRateControl", m_RCLCULevelRC, true, "Rate control: true: LCU level RC; false: picture level RC" )
	554	( "RCLCUSeparateModel", m_RCUseLCUSeparateModel, true, "Rate control: use LCU level separate R-lambda model" )
	555	( "InitialQP", m_RCInitialQP, 0, "Rate control: initial QP" )
	556	( "RCForceIntraQP", m_RCForceIntraQP, false, "Rate control: force intra QP to be equal to initial QP" )
	557	#else
	558	("RateCtrl,-rc", m_enableRateCtrl, false, "Rate control on/off")
	559	("TargetBitrate,-tbr", m_targetBitrate, 0, "Input target bitrate")
	560	("NumLCUInUnit,-nu", m_numLCUInUnit, 0, "Number of LCUs in an Unit")
	561	#endif
	562
	563	("TransquantBypassEnableFlag", m_TransquantBypassEnableFlag, false, "transquant_bypass_enable_flag indicator in PPS")
	564	("CUTransquantBypassFlagValue", m_CUTransquantBypassFlagValue, false, "Fixed cu_transquant_bypass_flag value, when transquant_bypass_enable_flag is enabled")
	565	("RecalculateQPAccordingToLambda", m_recalculateQPAccordingToLambda, false, "Recalculate QP values according to lambda values. Do not suggest to be enabled in all intra case")
	566	("StrongIntraSmoothing,-sis", m_useStrongIntraSmoothing, true, "Enable strong intra smoothing for 32x32 blocks")
	567	("SEIActiveParameterSets", m_activeParameterSetsSEIEnabled, 0, "Enable generation of active parameter sets SEI messages")
	568	("VuiParametersPresent,-vui", m_vuiParametersPresentFlag, false, "Enable generation of vui_parameters()")
	569	("AspectRatioInfoPresent", m_aspectRatioInfoPresentFlag, false, "Signals whether aspect_ratio_idc is present")
	570	("AspectRatioIdc", m_aspectRatioIdc, 0, "aspect_ratio_idc")
	571	("SarWidth", m_sarWidth, 0, "horizontal size of the sample aspect ratio")
	572	("SarHeight", m_sarHeight, 0, "vertical size of the sample aspect ratio")
	573	("OverscanInfoPresent", m_overscanInfoPresentFlag, false, "Indicates whether conformant decoded pictures are suitable for display using overscan\n")
	574	("OverscanAppropriate", m_overscanAppropriateFlag, false, "Indicates whether conformant decoded pictures are suitable for display using overscan\n")
	575	("VideoSignalTypePresent", m_videoSignalTypePresentFlag, false, "Signals whether video_format, video_full_range_flag, and colour_description_present_flag are present")
	576	("VideoFormat", m_videoFormat, 5, "Indicates representation of pictures")
	577	("VideoFullRange", m_videoFullRangeFlag, false, "Indicates the black level and range of luma and chroma signals")
	578	("ColourDescriptionPresent", m_colourDescriptionPresentFlag, false, "Signals whether colour_primaries, transfer_characteristics and matrix_coefficients are present")
	579	("ColourPrimaries", m_colourPrimaries, 2, "Indicates chromaticity coordinates of the source primaries")
	580	("TransferCharateristics", m_transferCharacteristics, 2, "Indicates the opto-electronic transfer characteristics of the source")
	581	("MatrixCoefficients", m_matrixCoefficients, 2, "Describes the matrix coefficients used in deriving luma and chroma from RGB primaries")
	582	("ChromaLocInfoPresent", m_chromaLocInfoPresentFlag, false, "Signals whether chroma_sample_loc_type_top_field and chroma_sample_loc_type_bottom_field are present")
	583	("ChromaSampleLocTypeTopField", m_chromaSampleLocTypeTopField, 0, "Specifies the location of chroma samples for top field")
	584	("ChromaSampleLocTypeBottomField", m_chromaSampleLocTypeBottomField, 0, "Specifies the location of chroma samples for bottom field")
	585	("NeutralChromaIndication", m_neutralChromaIndicationFlag, false, "Indicates that the value of all decoded chroma samples is equal to 1<<(BitDepthCr-1)")
	586	("DefaultDisplayWindowFlag", m_defaultDisplayWindowFlag, false, "Indicates the presence of the Default Window parameters")
	587	("DefDispWinLeftOffset", m_defDispWinLeftOffset, 0, "Specifies the left offset of the default display window from the conformance window")
	588	("DefDispWinRightOffset", m_defDispWinRightOffset, 0, "Specifies the right offset of the default display window from the conformance window")
	589	("DefDispWinTopOffset", m_defDispWinTopOffset, 0, "Specifies the top offset of the default display window from the conformance window")
	590	("DefDispWinBottomOffset", m_defDispWinBottomOffset, 0, "Specifies the bottom offset of the default display window from the conformance window")
	591	("FrameFieldInfoPresentFlag", m_frameFieldInfoPresentFlag, false, "Indicates that pic_struct and field coding related values are present in picture timing SEI messages")
	592	("PocProportionalToTimingFlag", m_pocProportionalToTimingFlag, false, "Indicates that the POC value is proportional to the output time w.r.t. first picture in CVS")
	593	("NumTicksPocDiffOneMinus1", m_numTicksPocDiffOneMinus1, 0, "Number of ticks minus 1 that for a POC difference of one")
	594	("BitstreamRestriction", m_bitstreamRestrictionFlag, false, "Signals whether bitstream restriction parameters are present")
	595	("TilesFixedStructure", m_tilesFixedStructureFlag, false, "Indicates that each active picture parameter set has the same values of the syntax elements related to tiles")
	596	("MotionVectorsOverPicBoundaries", m_motionVectorsOverPicBoundariesFlag, false, "Indicates that no samples outside the picture boundaries are used for inter prediction")
	597	("MaxBytesPerPicDenom", m_maxBytesPerPicDenom, 2, "Indicates a number of bytes not exceeded by the sum of the sizes of the VCL NAL units associated with any coded picture")
	598	("MaxBitsPerMinCuDenom", m_maxBitsPerMinCuDenom, 1, "Indicates an upper bound for the number of bits of coding_unit() data")
	599	("Log2MaxMvLengthHorizontal", m_log2MaxMvLengthHorizontal, 15, "Indicate the maximum absolute value of a decoded horizontal MV component in quarter-pel luma units")
	600	("Log2MaxMvLengthVertical", m_log2MaxMvLengthVertical, 15, "Indicate the maximum absolute value of a decoded vertical MV component in quarter-pel luma units")
	601	("SEIRecoveryPoint", m_recoveryPointSEIEnabled, 0, "Control generation of recovery point SEI messages")
	602	("SEIBufferingPeriod", m_bufferingPeriodSEIEnabled, 0, "Control generation of buffering period SEI messages")
	603	("SEIPictureTiming", m_pictureTimingSEIEnabled, 0, "Control generation of picture timing SEI messages")
	604	("SEIFramePacking", m_framePackingSEIEnabled, 0, "Control generation of frame packing SEI messages")
	605	("SEIFramePackingType", m_framePackingSEIType, 0, "Define frame packing arrangement\n"
	606	"\t0: checkerboard - pixels alternatively represent either frames\n"
	607	"\t1: column alternation - frames are interlaced by column\n"
	608	"\t2: row alternation - frames are interlaced by row\n"
	609	"\t3: side by side - frames are displayed horizontally\n"
	610	"\t4: top bottom - frames are displayed vertically\n"
	611	"\t5: frame alternation - one frame is alternated with the other")
	612	("SEIFramePackingId", m_framePackingSEIId, 0, "Id of frame packing SEI message for a given session")
	613	("SEIFramePackingQuincunx", m_framePackingSEIQuincunx, 0, "Indicate the presence of a Quincunx type video frame")
	614	("SEIFramePackingInterpretation", m_framePackingSEIInterpretation, 0, "Indicate the interpretation of the frame pair\n"
	615	"\t0: unspecified\n"
	616	"\t1: stereo pair, frame0 represents left view\n"
	617	"\t2: stereo pair, frame0 represents right view")
	618	("SEIDisplayOrientation", m_displayOrientationSEIAngle, 0, "Control generation of display orientation SEI messages\n"
	619	"\tN: 0 < N < (2^16 - 1) enable display orientation SEI message with anticlockwise_rotation = N and display_orientation_repetition_period = 1\n"
	620	"\t0: disable")
	621	("SEITemporalLevel0Index", m_temporalLevel0IndexSEIEnabled, 0, "Control generation of temporal level 0 index SEI messages")
	622	("SEIGradualDecodingRefreshInfo", m_gradualDecodingRefreshInfoEnabled, 0, "Control generation of gradual decoding refresh information SEI message")
	623	("SEIDecodingUnitInfo", m_decodingUnitInfoSEIEnabled, 0, "Control generation of decoding unit information SEI message.")
	624	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	625	("BitRatePicRateMaxTLayers", m_bitRatePicRateMaxTLayers, 0, "Maximum number of sub-layers signalled; can be inferred otherwise; here for easy parsing of config. file")
	626	("BitRateInfoPresent", cfg_bitRateInfoPresentFlag, string(""), "Control signalling of bit rate information of avg. bit rate and max. bit rate in VPS\n"
	627	"\t0: Do not sent bit rate info\n"
	628	"\tN (N > 0): Send bit rate info for N sub-layers. N should equal maxTempLayers.")
	629	("PicRateInfoPresent", cfg_picRateInfoPresentFlag, string(""), "Control signalling of picture rate information of avg. bit rate and max. bit rate in VPS\n"
	630	"\t0: Do not sent picture rate info\n"
	631	"\tN (N > 0): Send picture rate info for N sub-layers. N should equal maxTempLayers.")
	632	("AvgBitRate", cfg_avgBitRate, string(""), "List of avg. bit rates for the different sub-layers; include non-negative number even if corresponding flag is 0")
	633	("MaxBitRate", cfg_maxBitRate, string(""), "List of max. bit rates for the different sub-layers; include non-negative number even if corresponding flag is 0")
	634	("AvgPicRate", cfg_avgPicRate, string(""), "List of avg. picture rates for the different sub-layers; include non-negative number even if corresponding flag is 0")
	635	("ConstantPicRateIdc", cfg_constantPicRateIdc, string(""), "List of constant picture rate IDCs; include non-negative number even if corresponding flag is 0")
	636	#endif
	637	;
	638
	639	for(Int i=1; i<MAX_GOP+1; i++) {
	640	std::ostringstream cOSS;
	641	cOSS<<"Frame"<<i;
	642	opts.addOptions()(cOSS.str(), m_GOPList[i-1], GOPEntry());
	643	}
	644	po::setDefaults(opts);
	645	const list<const Char>& argv_unhandled = po::scanArgv(opts, argc, (const Char*) argv);
	646
	647	for (list<const Char*>::const_iterator it = argv_unhandled.begin(); it != argv_unhandled.end(); it++)
	648	{
	649	fprintf(stderr, "Unhandled argument ignored: `%s'\n", *it);
	650	}
	651
	652	if (argc == 1 \|\| do_help)
	653	{
	654	/* argc == 1: no options have been specified */
	655	po::doHelp(cout, opts);
	656	return false;
	657	}
	658
	659	/*
	660	* Set any derived parameters
	661	*/
	662	/* convert std::string to c string for compatability */
[54]	663	#if SVC_EXTENSION
	664	m_pBitstreamFile = cfg_BitstreamFile.empty() ? NULL : strdup(cfg_BitstreamFile.c_str());
	665	#if AVC_SYNTAX
	666	m_BLSyntaxFile = cfg_BLSyntaxFile.empty() ? NULL : strdup(cfg_BLSyntaxFile.c_str());
	667	#endif
	668	#else
[51]	669	m_pchInputFile = cfg_InputFile.empty() ? NULL : strdup(cfg_InputFile.c_str());
[56]	670	m_pchBitstreamFile = cfg_BitstreamFile.empty() ? NULL : strdup(cfg_BitstreamFile.c_str());
[51]	671	m_pchReconFile = cfg_ReconFile.empty() ? NULL : strdup(cfg_ReconFile.c_str());
	672	m_pchdQPFile = cfg_dQPFile.empty() ? NULL : strdup(cfg_dQPFile.c_str());
[54]	673	#endif
	674
[51]	675	Char* pColumnWidth = cfg_ColumnWidth.empty() ? NULL: strdup(cfg_ColumnWidth.c_str());
	676	Char* pRowHeight = cfg_RowHeight.empty() ? NULL : strdup(cfg_RowHeight.c_str());
	677	if( m_iUniformSpacingIdr == 0 && m_iNumColumnsMinus1 > 0 )
	678	{
	679	char *columnWidth;
	680	int i=0;
	681	m_pColumnWidth = new UInt[m_iNumColumnsMinus1];
	682	columnWidth = strtok(pColumnWidth, " ,-");
	683	while(columnWidth!=NULL)
	684	{
	685	if( i>=m_iNumColumnsMinus1 )
	686	{
	687	printf( "The number of columns whose width are defined is larger than the allowed number of columns.\n" );
	688	exit( EXIT_FAILURE );
	689	}
	690	*( m_pColumnWidth + i ) = atoi( columnWidth );
	691	columnWidth = strtok(NULL, " ,-");
	692	i++;
	693	}
	694	if( i<m_iNumColumnsMinus1 )
	695	{
	696	printf( "The width of some columns is not defined.\n" );
	697	exit( EXIT_FAILURE );
	698	}
	699	}
	700	else
	701	{
	702	m_pColumnWidth = NULL;
	703	}
	704
	705	if( m_iUniformSpacingIdr == 0 && m_iNumRowsMinus1 > 0 )
	706	{
	707	char *rowHeight;
	708	int i=0;
	709	m_pRowHeight = new UInt[m_iNumRowsMinus1];
	710	rowHeight = strtok(pRowHeight, " ,-");
	711	while(rowHeight!=NULL)
	712	{
	713	if( i>=m_iNumRowsMinus1 )
	714	{
	715	printf( "The number of rows whose height are defined is larger than the allowed number of rows.\n" );
	716	exit( EXIT_FAILURE );
	717	}
	718	*( m_pRowHeight + i ) = atoi( rowHeight );
	719	rowHeight = strtok(NULL, " ,-");
	720	i++;
	721	}
	722	if( i<m_iNumRowsMinus1 )
	723	{
	724	printf( "The height of some rows is not defined.\n" );
	725	exit( EXIT_FAILURE );
	726	}
	727	}
	728	else
	729	{
	730	m_pRowHeight = NULL;
	731	}
[118]	732	#if VPS_EXTN_DIRECT_REF_LAYERS
	733	for(Int layer = 0; layer < MAX_LAYERS; layer++)
	734	{
	735	Char* pRefLayerIds = cfg_refLayerIds[layer].empty() ? NULL: strdup(cfg_refLayerIds[layer].c_str());
	736	if( m_acLayerCfg[layer].m_numDirectRefLayers > 0 )
	737	{
	738	char *refLayerId;
	739	int i=0;
	740	m_acLayerCfg[layer].m_refLayerIds = new Int[m_acLayerCfg[layer].m_numDirectRefLayers];
	741	refLayerId = strtok(pRefLayerIds, " ,-");
	742	while(refLayerId != NULL)
	743	{
	744	if( i >= m_acLayerCfg[layer].m_numDirectRefLayers )
	745	{
	746	printf( "The number of columns whose width are defined is larger than the allowed number of columns.\n" );
	747	exit( EXIT_FAILURE );
	748	}
	749	*( m_acLayerCfg[layer].m_refLayerIds + i ) = atoi( refLayerId );
	750	refLayerId = strtok(NULL, " ,-");
	751	i++;
	752	}
	753	if( i < m_acLayerCfg[layer].m_numDirectRefLayers )
	754	{
	755	printf( "The width of some columns is not defined.\n" );
	756	exit( EXIT_FAILURE );
	757	}
	758	}
	759	else
	760	{
	761	m_acLayerCfg[layer].m_refLayerIds = NULL;
	762	}
	763	}
	764	#endif
[51]	765	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	766	readBoolString(cfg_bitRateInfoPresentFlag, m_bitRatePicRateMaxTLayers, m_bitRateInfoPresentFlag, "bit rate info. present flag" );
	767	readIntString (cfg_avgBitRate, m_bitRatePicRateMaxTLayers, m_avgBitRate, "avg. bit rate" );
	768	readIntString (cfg_maxBitRate, m_bitRatePicRateMaxTLayers, m_maxBitRate, "max. bit rate" );
	769	readBoolString(cfg_picRateInfoPresentFlag, m_bitRatePicRateMaxTLayers, m_picRateInfoPresentFlag, "bit rate info. present flag" );
	770	readIntString (cfg_avgPicRate, m_bitRatePicRateMaxTLayers, m_avgPicRate, "avg. pic rate" );
	771	readIntString (cfg_constantPicRateIdc, m_bitRatePicRateMaxTLayers, m_constantPicRateIdc, "constant pic rate Idc" );
	772	#endif
	773	m_scalingListFile = cfg_ScalingListFile.empty() ? NULL : strdup(cfg_ScalingListFile.c_str());
	774
	775	/* rules for input, output and internal bitdepths as per help text */
	776	if (!m_internalBitDepthY) { m_internalBitDepthY = m_inputBitDepthY; }
	777	if (!m_internalBitDepthC) { m_internalBitDepthC = m_internalBitDepthY; }
	778	if (!m_inputBitDepthC) { m_inputBitDepthC = m_inputBitDepthY; }
	779	if (!m_outputBitDepthY) { m_outputBitDepthY = m_internalBitDepthY; }
	780	if (!m_outputBitDepthC) { m_outputBitDepthC = m_internalBitDepthC; }
	781
[54]	782	#if !SVC_EXTENSION
[51]	783	// TODO:ChromaFmt assumes 4:2:0 below
	784	switch (m_conformanceMode)
	785	{
	786	case 0:
	787	{
	788	// no conformance or padding
	789	m_confLeft = m_confRight = m_confTop = m_confBottom = 0;
	790	m_aiPad[1] = m_aiPad[0] = 0;
	791	break;
	792	}
	793	case 1:
	794	{
	795	// automatic padding to minimum CU size
	796	Int minCuSize = m_uiMaxCUHeight >> (m_uiMaxCUDepth - 1);
	797	if (m_iSourceWidth % minCuSize)
	798	{
	799	m_aiPad[0] = m_confRight = ((m_iSourceWidth / minCuSize) + 1) * minCuSize - m_iSourceWidth;
	800	m_iSourceWidth += m_confRight;
	801	}
	802	if (m_iSourceHeight % minCuSize)
	803	{
	804	m_aiPad[1] = m_confBottom = ((m_iSourceHeight / minCuSize) + 1) * minCuSize - m_iSourceHeight;
	805	m_iSourceHeight += m_confBottom;
	806	}
	807	if (m_aiPad[0] % TComSPS::getWinUnitX(CHROMA_420) != 0)
	808	{
	809	fprintf(stderr, "Error: picture width is not an integer multiple of the specified chroma subsampling\n");
	810	exit(EXIT_FAILURE);
	811	}
	812	if (m_aiPad[1] % TComSPS::getWinUnitY(CHROMA_420) != 0)
	813	{
	814	fprintf(stderr, "Error: picture height is not an integer multiple of the specified chroma subsampling\n");
	815	exit(EXIT_FAILURE);
	816	}
	817	break;
	818	}
	819	case 2:
	820	{
	821	//padding
	822	m_iSourceWidth += m_aiPad[0];
	823	m_iSourceHeight += m_aiPad[1];
	824	m_confRight = m_aiPad[0];
	825	m_confBottom = m_aiPad[1];
	826	break;
	827	}
	828	case 3:
	829	{
	830	// conformance
	831	if ((m_confLeft == 0) && (m_confRight == 0) && (m_confTop == 0) && (m_confBottom == 0))
	832	{
	833	fprintf(stderr, "Warning: Conformance window enabled, but all conformance window parameters set to zero\n");
	834	}
	835	if ((m_aiPad[1] != 0) \|\| (m_aiPad[0]!=0))
	836	{
	837	fprintf(stderr, "Warning: Conformance window enabled, padding parameters will be ignored\n");
	838	}
	839	m_aiPad[1] = m_aiPad[0] = 0;
	840	break;
	841	}
	842	}
	843
	844	// allocate slice-based dQP values
	845	m_aidQP = new Int[ m_framesToBeEncoded + m_iGOPSize + 1 ];
	846	::memset( m_aidQP, 0, sizeof(Int)*( m_framesToBeEncoded + m_iGOPSize + 1 ) );
	847
	848	// handling of floating-point QP values
	849	// if QP is not integer, sequence is split into two sections having QP and QP+1
	850	m_iQP = (Int)( m_fQP );
	851	if ( m_iQP < m_fQP )
	852	{
	853	Int iSwitchPOC = (Int)( m_framesToBeEncoded - (m_fQP - m_iQP)*m_framesToBeEncoded + 0.5 );
	854
	855	iSwitchPOC = (Int)( (Double)iSwitchPOC / m_iGOPSize + 0.5 )*m_iGOPSize;
	856	for ( Int i=iSwitchPOC; i<m_framesToBeEncoded + m_iGOPSize + 1; i++ )
	857	{
	858	m_aidQP[i] = 1;
	859	}
	860	}
	861
	862	// reading external dQP description from file
	863	if ( m_pchdQPFile )
	864	{
	865	FILE* fpt=fopen( m_pchdQPFile, "r" );
	866	if ( fpt )
	867	{
	868	Int iValue;
	869	Int iPOC = 0;
	870	while ( iPOC < m_framesToBeEncoded )
	871	{
	872	if ( fscanf(fpt, "%d", &iValue ) == EOF ) break;
	873	m_aidQP[ iPOC ] = iValue;
	874	iPOC++;
	875	}
	876	fclose(fpt);
	877	}
	878	}
	879	m_iWaveFrontSubstreams = m_iWaveFrontSynchro ? (m_iSourceHeight + m_uiMaxCUHeight - 1) / m_uiMaxCUHeight : 1;
[54]	880	#endif
[51]	881	// check validity of input parameters
	882	xCheckParameter();
	883
	884	// set global varibles
	885	xSetGlobal();
	886
	887	// print-out parameters
	888	xPrintParameter();
	889
	890	return true;
	891	}
	892	#if SIGNAL_BITRATE_PICRATE_IN_VPS
	893	Void readBoolString(const string inpString, const Int numEntries, Bool* &memberArray, const char *elementName)
	894	{
	895	Char* inpArray = inpString.empty() ? NULL : strdup(inpString.c_str());
	896	Int i = 0;
	897	if(numEntries)
	898	{
	899	Char* tempArray = strtok(inpArray, " ,-");
	900	memberArray = new Bool[numEntries];
	901	while( tempArray != NULL )
	902	{
	903	if( i >= numEntries )
	904	{
	905	printf( "The number of %s defined is larger than the allowed number\n", elementName );
	906	exit( EXIT_FAILURE );
	907	}
	908	assert( (atoi(tempArray) == 0) \|\| (atoi(tempArray) == 1) );
	909	*( memberArray + i ) = atoi(tempArray);
	910	tempArray = strtok(NULL, " ,-");
	911	i++;
	912	}
	913	if( i < numEntries )
	914	{
	915	printf( "Some %s are not defined\n", elementName );
	916	exit( EXIT_FAILURE );
	917	}
	918	}
	919	else
	920	{
	921	memberArray = NULL;
	922	}
	923	}
	924
	925	Void readIntString(const string inpString, const Int numEntries, Int* &memberArray, const char *elementName)
	926	{
	927	Char* inpArray = inpString.empty() ? NULL : strdup(inpString.c_str());
	928	Int i = 0;
	929	if(numEntries)
	930	{
	931	Char* tempArray = strtok(inpArray, " ,-");
	932	memberArray = new Int[numEntries];
	933	while( tempArray != NULL )
	934	{
	935	if( i >= numEntries )
	936	{
	937	printf( "The number of %s defined is larger than the allowed number\n", elementName );
	938	exit( EXIT_FAILURE );
	939	}
	940	*( memberArray + i ) = atoi(tempArray);
	941	tempArray = strtok(NULL, " ,-");
	942	i++;
	943	}
	944	if( i < numEntries )
	945	{
	946	printf( "Some %s are not defined\n", elementName );
	947	exit( EXIT_FAILURE );
	948	}
	949	}
	950	else
	951	{
	952	memberArray = NULL;
	953	}
	954	}
	955	#endif
	956	// ====================================================================================================================
	957	// Private member functions
	958	// ====================================================================================================================
	959
	960	Bool confirmPara(Bool bflag, const Char* message);
	961
	962	Void TAppEncCfg::xCheckParameter()
	963	{
	964	if (!m_decodedPictureHashSEIEnabled)
	965	{
	966	fprintf(stderr, "******************************************************************\n");
	967	fprintf(stderr, " WARNING: --SEIDecodedPictureHash is now disabled by default. \n");
	968	fprintf(stderr, " Automatic verification of decoded pictures by a \n");
	969	fprintf(stderr, " decoder requires this option to be enabled. \n");
	970	fprintf(stderr, "******************************************************************\n");
	971	}
	972
	973	Bool check_failed = false; /* abort if there is a fatal configuration problem */
	974	#define xConfirmPara(a,b) check_failed \|= confirmPara(a,b)
	975	// check range of parameters
	976	xConfirmPara( m_inputBitDepthY < 8, "InputBitDepth must be at least 8" );
	977	xConfirmPara( m_inputBitDepthC < 8, "InputBitDepthC must be at least 8" );
[54]	978	#if !SVC_EXTENSION
[51]	979	xConfirmPara( m_iFrameRate <= 0, "Frame rate must be more than 1" );
[54]	980	#endif
[51]	981	xConfirmPara( m_framesToBeEncoded <= 0, "Total Number Of Frames encoded must be more than 0" );
	982	xConfirmPara( m_iGOPSize < 1 , "GOP Size must be greater or equal to 1" );
	983	xConfirmPara( m_iGOPSize > 1 && m_iGOPSize % 2, "GOP Size must be a multiple of 2, if GOP Size is greater than 1" );
[54]	984	#if !SVC_EXTENSION
[51]	985	xConfirmPara( (m_iIntraPeriod > 0 && m_iIntraPeriod < m_iGOPSize) \|\| m_iIntraPeriod == 0, "Intra period must be more than GOP size, or -1 , not 0" );
[54]	986	#endif
[51]	987	xConfirmPara( m_iDecodingRefreshType < 0 \|\| m_iDecodingRefreshType > 2, "Decoding Refresh Type must be equal to 0, 1 or 2" );
[54]	988	#if !SVC_EXTENSION
[51]	989	xConfirmPara( m_iQP < -6 * (m_internalBitDepthY - 8) \|\| m_iQP > 51, "QP exceeds supported range (-QpBDOffsety to 51)" );
[54]	990	#endif
[51]	991	xConfirmPara( m_loopFilterBetaOffsetDiv2 < -13 \|\| m_loopFilterBetaOffsetDiv2 > 13, "Loop Filter Beta Offset div. 2 exceeds supported range (-13 to 13)");
	992	xConfirmPara( m_loopFilterTcOffsetDiv2 < -13 \|\| m_loopFilterTcOffsetDiv2 > 13, "Loop Filter Tc Offset div. 2 exceeds supported range (-13 to 13)");
	993	xConfirmPara( m_iFastSearch < 0 \|\| m_iFastSearch > 2, "Fast Search Mode is not supported value (0:Full search 1:Diamond 2:PMVFAST)" );
	994	xConfirmPara( m_iSearchRange < 0 , "Search Range must be more than 0" );
	995	xConfirmPara( m_bipredSearchRange < 0 , "Search Range must be more than 0" );
	996	xConfirmPara( m_iMaxDeltaQP > 7, "Absolute Delta QP exceeds supported range (0 to 7)" );
	997	xConfirmPara( m_iMaxCuDQPDepth > m_uiMaxCUDepth - 1, "Absolute depth for a minimum CuDQP exceeds maximum coding unit depth" );
	998
	999	xConfirmPara( m_cbQpOffset < -12, "Min. Chroma Cb QP Offset is -12" );
	1000	xConfirmPara( m_cbQpOffset > 12, "Max. Chroma Cb QP Offset is 12" );
	1001	xConfirmPara( m_crQpOffset < -12, "Min. Chroma Cr QP Offset is -12" );
	1002	xConfirmPara( m_crQpOffset > 12, "Max. Chroma Cr QP Offset is 12" );
	1003
	1004	xConfirmPara( m_iQPAdaptationRange <= 0, "QP Adaptation Range must be more than 0" );
[54]	1005	#if !SVC_EXTENSION
[51]	1006	if (m_iDecodingRefreshType == 2)
	1007	{
	1008	xConfirmPara( m_iIntraPeriod > 0 && m_iIntraPeriod <= m_iGOPSize , "Intra period must be larger than GOP size for periodic IDR pictures");
	1009	}
[54]	1010	#endif
[51]	1011	xConfirmPara( (m_uiMaxCUWidth >> m_uiMaxCUDepth) < 4, "Minimum partition width size should be larger than or equal to 8");
	1012	xConfirmPara( (m_uiMaxCUHeight >> m_uiMaxCUDepth) < 4, "Minimum partition height size should be larger than or equal to 8");
	1013	xConfirmPara( m_uiMaxCUWidth < 16, "Maximum partition width size should be larger than or equal to 16");
	1014	xConfirmPara( m_uiMaxCUHeight < 16, "Maximum partition height size should be larger than or equal to 16");
[54]	1015	#if !SVC_EXTENSION
[51]	1016	xConfirmPara( (m_iSourceWidth % (m_uiMaxCUWidth >> (m_uiMaxCUDepth-1)))!=0, "Resulting coded frame width must be a multiple of the minimum CU size");
	1017	xConfirmPara( (m_iSourceHeight % (m_uiMaxCUHeight >> (m_uiMaxCUDepth-1)))!=0, "Resulting coded frame height must be a multiple of the minimum CU size");
[54]	1018	#endif
[51]	1019
	1020	xConfirmPara( m_uiQuadtreeTULog2MinSize < 2, "QuadtreeTULog2MinSize must be 2 or greater.");
	1021	xConfirmPara( m_uiQuadtreeTULog2MaxSize > 5, "QuadtreeTULog2MaxSize must be 5 or smaller.");
	1022	xConfirmPara( (1<<m_uiQuadtreeTULog2MaxSize) > m_uiMaxCUWidth, "QuadtreeTULog2MaxSize must be log2(maxCUSize) or smaller.");
	1023
	1024	xConfirmPara( m_uiQuadtreeTULog2MaxSize < m_uiQuadtreeTULog2MinSize, "QuadtreeTULog2MaxSize must be greater than or equal to m_uiQuadtreeTULog2MinSize.");
	1025	xConfirmPara( (1<<m_uiQuadtreeTULog2MinSize)>(m_uiMaxCUWidth >>(m_uiMaxCUDepth-1)), "QuadtreeTULog2MinSize must not be greater than minimum CU size" ); // HS
	1026	xConfirmPara( (1<<m_uiQuadtreeTULog2MinSize)>(m_uiMaxCUHeight>>(m_uiMaxCUDepth-1)), "QuadtreeTULog2MinSize must not be greater than minimum CU size" ); // HS
	1027	xConfirmPara( ( 1 << m_uiQuadtreeTULog2MinSize ) > ( m_uiMaxCUWidth >> m_uiMaxCUDepth ), "Minimum CU width must be greater than minimum transform size." );
	1028	xConfirmPara( ( 1 << m_uiQuadtreeTULog2MinSize ) > ( m_uiMaxCUHeight >> m_uiMaxCUDepth ), "Minimum CU height must be greater than minimum transform size." );
	1029	xConfirmPara( m_uiQuadtreeTUMaxDepthInter < 1, "QuadtreeTUMaxDepthInter must be greater than or equal to 1" );
	1030	xConfirmPara( m_uiMaxCUWidth < ( 1 << (m_uiQuadtreeTULog2MinSize + m_uiQuadtreeTUMaxDepthInter - 1) ), "QuadtreeTUMaxDepthInter must be less than or equal to the difference between log2(maxCUSize) and QuadtreeTULog2MinSize plus 1" );
	1031	xConfirmPara( m_uiQuadtreeTUMaxDepthIntra < 1, "QuadtreeTUMaxDepthIntra must be greater than or equal to 1" );
	1032	xConfirmPara( m_uiMaxCUWidth < ( 1 << (m_uiQuadtreeTULog2MinSize + m_uiQuadtreeTUMaxDepthIntra - 1) ), "QuadtreeTUMaxDepthInter must be less than or equal to the difference between log2(maxCUSize) and QuadtreeTULog2MinSize plus 1" );
	1033
	1034	xConfirmPara( m_maxNumMergeCand < 1, "MaxNumMergeCand must be 1 or greater.");
	1035	xConfirmPara( m_maxNumMergeCand > 5, "MaxNumMergeCand must be 5 or smaller.");
	1036
[54]	1037	#if !SVC_EXTENSION
[51]	1038	#if ADAPTIVE_QP_SELECTION
	1039	xConfirmPara( m_bUseAdaptQpSelect == true && m_iQP < 0, "AdaptiveQpSelection must be disabled when QP < 0.");
	1040	xConfirmPara( m_bUseAdaptQpSelect == true && (m_cbQpOffset !=0 \|\| m_crQpOffset != 0 ), "AdaptiveQpSelection must be disabled when ChromaQpOffset is not equal to 0.");
	1041	#endif
[54]	1042	#endif
[51]	1043
	1044	if( m_usePCM)
	1045	{
	1046	xConfirmPara( m_uiPCMLog2MinSize < 3, "PCMLog2MinSize must be 3 or greater.");
	1047	xConfirmPara( m_uiPCMLog2MinSize > 5, "PCMLog2MinSize must be 5 or smaller.");
	1048	xConfirmPara( m_pcmLog2MaxSize > 5, "PCMLog2MaxSize must be 5 or smaller.");
	1049	xConfirmPara( m_pcmLog2MaxSize < m_uiPCMLog2MinSize, "PCMLog2MaxSize must be equal to or greater than m_uiPCMLog2MinSize.");
	1050	}
	1051
	1052	xConfirmPara( m_sliceMode < 0 \|\| m_sliceMode > 3, "SliceMode exceeds supported range (0 to 3)" );
	1053	if (m_sliceMode!=0)
	1054	{
	1055	xConfirmPara( m_sliceArgument < 1 , "SliceArgument should be larger than or equal to 1" );
	1056	}
	1057	xConfirmPara( m_sliceSegmentMode < 0 \|\| m_sliceSegmentMode > 3, "SliceSegmentMode exceeds supported range (0 to 3)" );
	1058	if (m_sliceSegmentMode!=0)
	1059	{
	1060	xConfirmPara( m_sliceSegmentArgument < 1 , "SliceSegmentArgument should be larger than or equal to 1" );
	1061	}
	1062
	1063	Bool tileFlag = (m_iNumColumnsMinus1 > 0 \|\| m_iNumRowsMinus1 > 0 );
	1064	xConfirmPara( tileFlag && m_iWaveFrontSynchro, "Tile and Wavefront can not be applied together");
	1065
	1066	//TODO:ChromaFmt assumes 4:2:0 below
[54]	1067	#if !SVC_EXTENSION
[51]	1068	xConfirmPara( m_iSourceWidth % TComSPS::getWinUnitX(CHROMA_420) != 0, "Picture width must be an integer multiple of the specified chroma subsampling");
	1069	xConfirmPara( m_iSourceHeight % TComSPS::getWinUnitY(CHROMA_420) != 0, "Picture height must be an integer multiple of the specified chroma subsampling");
	1070
	1071	xConfirmPara( m_aiPad[0] % TComSPS::getWinUnitX(CHROMA_420) != 0, "Horizontal padding must be an integer multiple of the specified chroma subsampling");
	1072	xConfirmPara( m_aiPad[1] % TComSPS::getWinUnitY(CHROMA_420) != 0, "Vertical padding must be an integer multiple of the specified chroma subsampling");
	1073
	1074	xConfirmPara( m_confLeft % TComSPS::getWinUnitX(CHROMA_420) != 0, "Left conformance window offset must be an integer multiple of the specified chroma subsampling");
	1075	xConfirmPara( m_confRight % TComSPS::getWinUnitX(CHROMA_420) != 0, "Right conformance window offset must be an integer multiple of the specified chroma subsampling");
	1076	xConfirmPara( m_confTop % TComSPS::getWinUnitY(CHROMA_420) != 0, "Top conformance window offset must be an integer multiple of the specified chroma subsampling");
	1077	xConfirmPara( m_confBottom % TComSPS::getWinUnitY(CHROMA_420) != 0, "Bottom conformance window offset must be an integer multiple of the specified chroma subsampling");
[54]	1078	#endif
[51]	1079
	1080	// max CU width and height should be power of 2
	1081	UInt ui = m_uiMaxCUWidth;
	1082	while(ui)
	1083	{
	1084	ui >>= 1;
	1085	if( (ui & 1) == 1)
	1086	xConfirmPara( ui != 1 , "Width should be 2^n");
	1087	}
	1088	ui = m_uiMaxCUHeight;
	1089	while(ui)
	1090	{
	1091	ui >>= 1;
	1092	if( (ui & 1) == 1)
	1093	xConfirmPara( ui != 1 , "Height should be 2^n");
	1094	}
	1095
[54]	1096
[51]	1097	/* if this is an intra-only sequence, ie IntraPeriod=1, don't verify the GOP structure
	1098	* This permits the ability to omit a GOP structure specification */
[54]	1099	#if SVC_EXTENSION
	1100	for(UInt layer = 0; layer < MAX_LAYERS; layer++)
	1101	{
	1102	Int m_iIntraPeriod = m_acLayerCfg[layer].m_iIntraPeriod;
	1103	#endif
[51]	1104	if (m_iIntraPeriod == 1 && m_GOPList[0].m_POC == -1) {
	1105	m_GOPList[0] = GOPEntry();
	1106	m_GOPList[0].m_QPFactor = 1;
	1107	m_GOPList[0].m_betaOffsetDiv2 = 0;
	1108	m_GOPList[0].m_tcOffsetDiv2 = 0;
	1109	m_GOPList[0].m_POC = 1;
	1110	m_GOPList[0].m_numRefPicsActive = 4;
	1111	}
[54]	1112	#if SVC_EXTENSION
	1113	}
	1114	#endif
[51]	1115
	1116	Bool verifiedGOP=false;
	1117	Bool errorGOP=false;
	1118	Int checkGOP=1;
	1119	Int numRefs = 1;
	1120	Int refList[MAX_NUM_REF_PICS+1];
	1121	refList[0]=0;
	1122	Bool isOK[MAX_GOP];
	1123	for(Int i=0; i<MAX_GOP; i++)
	1124	{
	1125	isOK[i]=false;
	1126	}
	1127	Int numOK=0;
[54]	1128	#if !SVC_EXTENSION
[51]	1129	xConfirmPara( m_iIntraPeriod >=0&&(m_iIntraPeriod%m_iGOPSize!=0), "Intra period must be a multiple of GOPSize, or -1" );
[54]	1130	#endif
[51]	1131
	1132	for(Int i=0; i<m_iGOPSize; i++)
	1133	{
	1134	if(m_GOPList[i].m_POC==m_iGOPSize)
	1135	{
	1136	xConfirmPara( m_GOPList[i].m_temporalId!=0 , "The last frame in each GOP must have temporal ID = 0 " );
	1137	}
	1138	}
[54]	1139
	1140	#if SVC_EXTENSION
	1141	// verify layer configuration parameters
	1142	for(UInt layer=0; layer<m_numLayers; layer++)
	1143	{
	1144	if(m_acLayerCfg[layer].xCheckParameter())
	1145	{
	1146	printf("\nError: invalid configuration parameter found in layer %d \n", layer);
	1147	check_failed = true;
	1148	}
	1149	}
	1150	#endif
	1151
	1152	#if SVC_EXTENSION
	1153	// verify layer configuration parameters
	1154	for(UInt layer=0; layer<m_numLayers; layer++)
	1155	{
	1156	Int m_iIntraPeriod = m_acLayerCfg[layer].m_iIntraPeriod;
	1157	#endif
[51]	1158	if ( (m_iIntraPeriod != 1) && !m_loopFilterOffsetInPPS && m_DeblockingFilterControlPresent && (!m_bLoopFilterDisable) )
	1159	{
	1160	for(Int i=0; i<m_iGOPSize; i++)
	1161	{
	1162	xConfirmPara( (m_GOPList[i].m_betaOffsetDiv2 + m_loopFilterBetaOffsetDiv2) < -6 \|\| (m_GOPList[i].m_betaOffsetDiv2 + m_loopFilterBetaOffsetDiv2) > 6, "Loop Filter Beta Offset div. 2 for one of the GOP entries exceeds supported range (-6 to 6)" );
	1163	xConfirmPara( (m_GOPList[i].m_tcOffsetDiv2 + m_loopFilterTcOffsetDiv2) < -6 \|\| (m_GOPList[i].m_tcOffsetDiv2 + m_loopFilterTcOffsetDiv2) > 6, "Loop Filter Tc Offset div. 2 for one of the GOP entries exceeds supported range (-6 to 6)" );
	1164	}
	1165	}
[54]	1166	#if SVC_EXTENSION
	1167	}
	1168	#endif
	1169
[51]	1170	m_extraRPSs=0;
	1171	//start looping through frames in coding order until we can verify that the GOP structure is correct.
	1172	while(!verifiedGOP&&!errorGOP)
	1173	{
	1174	Int curGOP = (checkGOP-1)%m_iGOPSize;
	1175	Int curPOC = ((checkGOP-1)/m_iGOPSize)*m_iGOPSize + m_GOPList[curGOP].m_POC;
	1176	if(m_GOPList[curGOP].m_POC<0)
	1177	{
	1178	printf("\nError: found fewer Reference Picture Sets than GOPSize\n");
	1179	errorGOP=true;
	1180	}
	1181	else
	1182	{
	1183	//check that all reference pictures are available, or have a POC < 0 meaning they might be available in the next GOP.
	1184	Bool beforeI = false;
	1185	for(Int i = 0; i< m_GOPList[curGOP].m_numRefPics; i++)
	1186	{
	1187	Int absPOC = curPOC+m_GOPList[curGOP].m_referencePics[i];
	1188	if(absPOC < 0)
	1189	{
	1190	beforeI=true;
	1191	}
	1192	else
	1193	{
	1194	Bool found=false;
	1195	for(Int j=0; j<numRefs; j++)
	1196	{
	1197	if(refList[j]==absPOC)
	1198	{
	1199	found=true;
	1200	for(Int k=0; k<m_iGOPSize; k++)
	1201	{
	1202	if(absPOC%m_iGOPSize == m_GOPList[k].m_POC%m_iGOPSize)
	1203	{
	1204	if(m_GOPList[k].m_temporalId==m_GOPList[curGOP].m_temporalId)
	1205	{
	1206	m_GOPList[k].m_refPic = true;
	1207	}
	1208	m_GOPList[curGOP].m_usedByCurrPic[i]=m_GOPList[k].m_temporalId<=m_GOPList[curGOP].m_temporalId;
	1209	}
	1210	}
	1211	}
	1212	}
	1213	if(!found)
	1214	{
	1215	printf("\nError: ref pic %d is not available for GOP frame %d\n",m_GOPList[curGOP].m_referencePics[i],curGOP+1);
	1216	errorGOP=true;
	1217	}
	1218	}
	1219	}
	1220	if(!beforeI&&!errorGOP)
	1221	{
	1222	//all ref frames were present
	1223	if(!isOK[curGOP])
	1224	{
	1225	numOK++;
	1226	isOK[curGOP]=true;
	1227	if(numOK==m_iGOPSize)
	1228	{
	1229	verifiedGOP=true;
	1230	}
	1231	}
	1232	}
	1233	else
	1234	{
	1235	//create a new GOPEntry for this frame containing all the reference pictures that were available (POC > 0)
	1236	m_GOPList[m_iGOPSize+m_extraRPSs]=m_GOPList[curGOP];
	1237	Int newRefs=0;
	1238	for(Int i = 0; i< m_GOPList[curGOP].m_numRefPics; i++)
	1239	{
	1240	Int absPOC = curPOC+m_GOPList[curGOP].m_referencePics[i];
	1241	if(absPOC>=0)
	1242	{
	1243	m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[newRefs]=m_GOPList[curGOP].m_referencePics[i];
	1244	m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[newRefs]=m_GOPList[curGOP].m_usedByCurrPic[i];
	1245	newRefs++;
	1246	}
	1247	}
	1248	Int numPrefRefs = m_GOPList[curGOP].m_numRefPicsActive;
	1249
	1250	for(Int offset = -1; offset>-checkGOP; offset--)
	1251	{
	1252	//step backwards in coding order and include any extra available pictures we might find useful to replace the ones with POC < 0.
	1253	Int offGOP = (checkGOP-1+offset)%m_iGOPSize;
	1254	Int offPOC = ((checkGOP-1+offset)/m_iGOPSize)*m_iGOPSize + m_GOPList[offGOP].m_POC;
	1255	if(offPOC>=0&&m_GOPList[offGOP].m_temporalId<=m_GOPList[curGOP].m_temporalId)
	1256	{
	1257	Bool newRef=false;
	1258	for(Int i=0; i<numRefs; i++)
	1259	{
	1260	if(refList[i]==offPOC)
	1261	{
	1262	newRef=true;
	1263	}
	1264	}
	1265	for(Int i=0; i<newRefs; i++)
	1266	{
	1267	if(m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[i]==offPOC-curPOC)
	1268	{
	1269	newRef=false;
	1270	}
	1271	}
	1272	if(newRef)
	1273	{
	1274	Int insertPoint=newRefs;
	1275	//this picture can be added, find appropriate place in list and insert it.
	1276	if(m_GOPList[offGOP].m_temporalId==m_GOPList[curGOP].m_temporalId)
	1277	{
	1278	m_GOPList[offGOP].m_refPic = true;
	1279	}
	1280	for(Int j=0; j<newRefs; j++)
	1281	{
	1282	if(m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j]<offPOC-curPOC\|\|m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j]>0)
	1283	{
	1284	insertPoint = j;
	1285	break;
	1286	}
	1287	}
	1288	Int prev = offPOC-curPOC;
	1289	Int prevUsed = m_GOPList[offGOP].m_temporalId<=m_GOPList[curGOP].m_temporalId;
	1290	for(Int j=insertPoint; j<newRefs+1; j++)
	1291	{
	1292	Int newPrev = m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j];
	1293	Int newUsed = m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[j];
	1294	m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j]=prev;
	1295	m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[j]=prevUsed;
	1296	prevUsed=newUsed;
	1297	prev=newPrev;
	1298	}
	1299	newRefs++;
	1300	}
	1301	}
	1302	if(newRefs>=numPrefRefs)
	1303	{
	1304	break;
	1305	}
	1306	}
	1307	m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefPics=newRefs;
	1308	m_GOPList[m_iGOPSize+m_extraRPSs].m_POC = curPOC;
	1309	if (m_extraRPSs == 0)
	1310	{
	1311	m_GOPList[m_iGOPSize+m_extraRPSs].m_interRPSPrediction = 0;
	1312	m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefIdc = 0;
	1313	}
	1314	else
	1315	{
	1316	Int rIdx = m_iGOPSize + m_extraRPSs - 1;
	1317	Int refPOC = m_GOPList[rIdx].m_POC;
	1318	Int refPics = m_GOPList[rIdx].m_numRefPics;
	1319	Int newIdc=0;
	1320	for(Int i = 0; i<= refPics; i++)
	1321	{
	1322	Int deltaPOC = ((i != refPics)? m_GOPList[rIdx].m_referencePics[i] : 0); // check if the reference abs POC is >= 0
	1323	Int absPOCref = refPOC+deltaPOC;
	1324	Int refIdc = 0;
	1325	for (Int j = 0; j < m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefPics; j++)
	1326	{
	1327	if ( (absPOCref - curPOC) == m_GOPList[m_iGOPSize+m_extraRPSs].m_referencePics[j])
	1328	{
	1329	if (m_GOPList[m_iGOPSize+m_extraRPSs].m_usedByCurrPic[j])
	1330	{
	1331	refIdc = 1;
	1332	}
	1333	else
	1334	{
	1335	refIdc = 2;
	1336	}
	1337	}
	1338	}
	1339	m_GOPList[m_iGOPSize+m_extraRPSs].m_refIdc[newIdc]=refIdc;
	1340	newIdc++;
	1341	}
	1342	m_GOPList[m_iGOPSize+m_extraRPSs].m_interRPSPrediction = 1;
	1343	m_GOPList[m_iGOPSize+m_extraRPSs].m_numRefIdc = newIdc;
	1344	m_GOPList[m_iGOPSize+m_extraRPSs].m_deltaRPS = refPOC - m_GOPList[m_iGOPSize+m_extraRPSs].m_POC;
	1345	}
	1346	curGOP=m_iGOPSize+m_extraRPSs;
	1347	m_extraRPSs++;
	1348	}
	1349	numRefs=0;
	1350	for(Int i = 0; i< m_GOPList[curGOP].m_numRefPics; i++)
	1351	{
	1352	Int absPOC = curPOC+m_GOPList[curGOP].m_referencePics[i];
	1353	if(absPOC >= 0)
	1354	{
	1355	refList[numRefs]=absPOC;
	1356	numRefs++;
	1357	}
	1358	}
	1359	refList[numRefs]=curPOC;
	1360	numRefs++;
	1361	}
	1362	checkGOP++;
	1363	}
	1364	xConfirmPara(errorGOP,"Invalid GOP structure given");
	1365	m_maxTempLayer = 1;
	1366	for(Int i=0; i<m_iGOPSize; i++)
	1367	{
	1368	if(m_GOPList[i].m_temporalId >= m_maxTempLayer)
	1369	{
	1370	m_maxTempLayer = m_GOPList[i].m_temporalId+1;
	1371	}
	1372	xConfirmPara(m_GOPList[i].m_sliceType!='B'&&m_GOPList[i].m_sliceType!='P', "Slice type must be equal to B or P");
	1373	}
	1374	for(Int i=0; i<MAX_TLAYER; i++)
	1375	{
	1376	m_numReorderPics[i] = 0;
	1377	m_maxDecPicBuffering[i] = 0;
	1378	}
	1379	for(Int i=0; i<m_iGOPSize; i++)
	1380	{
	1381	if(m_GOPList[i].m_numRefPics > m_maxDecPicBuffering[m_GOPList[i].m_temporalId])
	1382	{
	1383	m_maxDecPicBuffering[m_GOPList[i].m_temporalId] = m_GOPList[i].m_numRefPics;
	1384	}
	1385	Int highestDecodingNumberWithLowerPOC = 0;
	1386	for(Int j=0; j<m_iGOPSize; j++)
	1387	{
	1388	if(m_GOPList[j].m_POC <= m_GOPList[i].m_POC)
	1389	{
	1390	highestDecodingNumberWithLowerPOC = j;
	1391	}
	1392	}
	1393	Int numReorder = 0;
	1394	for(Int j=0; j<highestDecodingNumberWithLowerPOC; j++)
	1395	{
	1396	if(m_GOPList[j].m_temporalId <= m_GOPList[i].m_temporalId &&
	1397	m_GOPList[j].m_POC > m_GOPList[i].m_POC)
	1398	{
	1399	numReorder++;
	1400	}
	1401	}
	1402	if(numReorder > m_numReorderPics[m_GOPList[i].m_temporalId])
	1403	{
	1404	m_numReorderPics[m_GOPList[i].m_temporalId] = numReorder;
	1405	}
	1406	}
	1407	for(Int i=0; i<MAX_TLAYER-1; i++)
	1408	{
	1409	// a lower layer can not have higher value of m_numReorderPics than a higher layer
	1410	if(m_numReorderPics[i+1] < m_numReorderPics[i])
	1411	{
	1412	m_numReorderPics[i+1] = m_numReorderPics[i];
	1413	}
	1414	// the value of num_reorder_pics[ i ] shall be in the range of 0 to max_dec_pic_buffering[ i ], inclusive
	1415	if(m_numReorderPics[i] > m_maxDecPicBuffering[i])
	1416	{
	1417	m_maxDecPicBuffering[i] = m_numReorderPics[i];
	1418	}
	1419	// a lower layer can not have higher value of m_uiMaxDecPicBuffering than a higher layer
	1420	if(m_maxDecPicBuffering[i+1] < m_maxDecPicBuffering[i])
	1421	{
	1422	m_maxDecPicBuffering[i+1] = m_maxDecPicBuffering[i];
	1423	}
	1424	}
	1425	// the value of num_reorder_pics[ i ] shall be in the range of 0 to max_dec_pic_buffering[ i ], inclusive
	1426	if(m_numReorderPics[MAX_TLAYER-1] > m_maxDecPicBuffering[MAX_TLAYER-1])
	1427	{
	1428	m_maxDecPicBuffering[MAX_TLAYER-1] = m_numReorderPics[MAX_TLAYER-1];
	1429	}
	1430
[54]	1431	#if SVC_EXTENSION // ToDo: it should be checked for the case when parameters are different for the layers
	1432	for(UInt layer = 0; layer < MAX_LAYERS; layer++)
	1433	{
	1434	Int m_iSourceWidth = m_acLayerCfg[layer].m_iSourceWidth;
	1435	Int m_iSourceHeight = m_acLayerCfg[layer].m_iSourceHeight;
	1436	#endif
[51]	1437	if(m_vuiParametersPresentFlag && m_bitstreamRestrictionFlag)
	1438	{
	1439	Int PicSizeInSamplesY = m_iSourceWidth * m_iSourceHeight;
	1440	if(tileFlag)
	1441	{
	1442	Int maxTileWidth = 0;
	1443	Int maxTileHeight = 0;
	1444	Int widthInCU = (m_iSourceWidth % m_uiMaxCUWidth) ? m_iSourceWidth/m_uiMaxCUWidth + 1: m_iSourceWidth/m_uiMaxCUWidth;
	1445	Int heightInCU = (m_iSourceHeight % m_uiMaxCUHeight) ? m_iSourceHeight/m_uiMaxCUHeight + 1: m_iSourceHeight/m_uiMaxCUHeight;
	1446	if(m_iUniformSpacingIdr)
	1447	{
	1448	maxTileWidth = m_uiMaxCUWidth*((widthInCU+m_iNumColumnsMinus1)/(m_iNumColumnsMinus1+1));
	1449	maxTileHeight = m_uiMaxCUHeight*((heightInCU+m_iNumRowsMinus1)/(m_iNumRowsMinus1+1));
	1450	// if only the last tile-row is one treeblock higher than the others
	1451	// the maxTileHeight becomes smaller if the last row of treeblocks has lower height than the others
	1452	if(!((heightInCU-1)%(m_iNumRowsMinus1+1)))
	1453	{
	1454	maxTileHeight = maxTileHeight - m_uiMaxCUHeight + (m_iSourceHeight % m_uiMaxCUHeight);
	1455	}
	1456	// if only the last tile-column is one treeblock wider than the others
	1457	// the maxTileWidth becomes smaller if the last column of treeblocks has lower width than the others
	1458	if(!((widthInCU-1)%(m_iNumColumnsMinus1+1)))
	1459	{
	1460	maxTileWidth = maxTileWidth - m_uiMaxCUWidth + (m_iSourceWidth % m_uiMaxCUWidth);
	1461	}
	1462	}
	1463	else // not uniform spacing
	1464	{
	1465	if(m_iNumColumnsMinus1<1)
	1466	{
	1467	maxTileWidth = m_iSourceWidth;
	1468	}
	1469	else
	1470	{
	1471	Int accColumnWidth = 0;
	1472	for(Int col=0; col<(m_iNumColumnsMinus1); col++)
	1473	{
	1474	maxTileWidth = m_pColumnWidth[col]>maxTileWidth ? m_pColumnWidth[col]:maxTileWidth;
	1475	accColumnWidth += m_pColumnWidth[col];
	1476	}
	1477	maxTileWidth = (widthInCU-accColumnWidth)>maxTileWidth ? m_uiMaxCUWidth(widthInCU-accColumnWidth):m_uiMaxCUWidthmaxTileWidth;
	1478	}
	1479	if(m_iNumRowsMinus1<1)
	1480	{
	1481	maxTileHeight = m_iSourceHeight;
	1482	}
	1483	else
	1484	{
	1485	Int accRowHeight = 0;
	1486	for(Int row=0; row<(m_iNumRowsMinus1); row++)
	1487	{
	1488	maxTileHeight = m_pRowHeight[row]>maxTileHeight ? m_pRowHeight[row]:maxTileHeight;
	1489	accRowHeight += m_pRowHeight[row];
	1490	}
	1491	maxTileHeight = (heightInCU-accRowHeight)>maxTileHeight ? m_uiMaxCUHeight(heightInCU-accRowHeight):m_uiMaxCUHeightmaxTileHeight;
	1492	}
	1493	}
	1494	Int maxSizeInSamplesY = maxTileWidth*maxTileHeight;
	1495	m_minSpatialSegmentationIdc = 4*PicSizeInSamplesY/maxSizeInSamplesY-4;
	1496	}
	1497	else if(m_iWaveFrontSynchro)
	1498	{
	1499	m_minSpatialSegmentationIdc = 4PicSizeInSamplesY/((2m_iSourceHeight+m_iSourceWidth)*m_uiMaxCUHeight)-4;
	1500	}
	1501	else if(m_sliceMode == 1)
	1502	{
	1503	m_minSpatialSegmentationIdc = 4PicSizeInSamplesY/(m_sliceArgumentm_uiMaxCUWidth*m_uiMaxCUHeight)-4;
	1504	}
	1505	else
	1506	{
	1507	m_minSpatialSegmentationIdc = 0;
	1508	}
	1509	}
[54]	1510	#if SVC_EXTENSION
	1511	}
	1512	#endif
	1513
[51]	1514	xConfirmPara( m_bUseLComb==false && m_numReorderPics[MAX_TLAYER-1]!=0, "ListCombination can only be 0 in low delay coding (more precisely when L0 and L1 are identical)" ); // Note however this is not the full necessary condition as ref_pic_list_combination_flag can only be 0 if L0 == L1.
	1515	xConfirmPara( m_iWaveFrontSynchro < 0, "WaveFrontSynchro cannot be negative" );
[54]	1516	#if !SVC_EXTENSION
[51]	1517	xConfirmPara( m_iWaveFrontSubstreams <= 0, "WaveFrontSubstreams must be positive" );
	1518	xConfirmPara( m_iWaveFrontSubstreams > 1 && !m_iWaveFrontSynchro, "Must have WaveFrontSynchro > 0 in order to have WaveFrontSubstreams > 1" );
[54]	1519	#endif
[51]	1520
	1521	xConfirmPara( m_decodedPictureHashSEIEnabled<0 \|\| m_decodedPictureHashSEIEnabled>3, "this hash type is not correct!\n");
	1522
	1523	#if RATE_CONTROL_LAMBDA_DOMAIN
	1524	if ( m_RCEnableRateControl )
	1525	{
	1526	if ( m_RCForceIntraQP )
	1527	{
	1528	if ( m_RCInitialQP == 0 )
	1529	{
	1530	printf( "\nInitial QP for rate control is not specified. Reset not to use force intra QP!" );
	1531	m_RCForceIntraQP = false;
	1532	}
	1533	}
	1534	xConfirmPara( m_uiDeltaQpRD > 0, "Rate control cannot be used together with slice level multiple-QP optimization!\n" );
	1535	}
	1536	#else
	1537	if(m_enableRateCtrl)
	1538	{
	1539	Int numLCUInWidth = (m_iSourceWidth / m_uiMaxCUWidth) + (( m_iSourceWidth % m_uiMaxCUWidth ) ? 1 : 0);
	1540	Int numLCUInHeight = (m_iSourceHeight / m_uiMaxCUHeight)+ (( m_iSourceHeight % m_uiMaxCUHeight) ? 1 : 0);
	1541	Int numLCUInPic = numLCUInWidth * numLCUInHeight;
	1542
	1543	xConfirmPara( (numLCUInPic % m_numLCUInUnit) != 0, "total number of LCUs in a frame should be completely divided by NumLCUInUnit" );
	1544
	1545	m_iMaxDeltaQP = MAX_DELTA_QP;
	1546	m_iMaxCuDQPDepth = MAX_CUDQP_DEPTH;
	1547	}
	1548	#endif
	1549
	1550	xConfirmPara(!m_TransquantBypassEnableFlag && m_CUTransquantBypassFlagValue, "CUTransquantBypassFlagValue cannot be 1 when TransquantBypassEnableFlag is 0");
	1551
	1552	xConfirmPara(m_log2ParallelMergeLevel < 2, "Log2ParallelMergeLevel should be larger than or equal to 2");
	1553	#if L0444_FPA_TYPE
	1554	if (m_framePackingSEIEnabled)
	1555	{
	1556	xConfirmPara(m_framePackingSEIType < 3 \|\| m_framePackingSEIType > 5 , "SEIFramePackingType must be in rage 3 to 5");
	1557	}
	1558	#endif
[118]	1559	#if VPS_EXTN_DIRECT_REF_LAYERS
	1560	xConfirmPara( (m_acLayerCfg[0].m_numDirectRefLayers != 0) && (m_acLayerCfg[0].m_numDirectRefLayers != -1), "Layer 0 cannot have any reference layers" );
	1561	// NOTE: m_numDirectRefLayers (for any layer) could be -1 (not signalled in cfg), in which case only the "previous layer" would be taken for reference
	1562	for(Int layer = 1; layer < MAX_LAYERS; layer++)
	1563	{
	1564	xConfirmPara(m_acLayerCfg[layer].m_numDirectRefLayers > layer, "Cannot reference more layers than before current layer");
	1565	for(Int i = 0; i < m_acLayerCfg[layer].m_numDirectRefLayers; i++)
	1566	{
	1567	xConfirmPara(m_acLayerCfg[layer].m_refLayerIds[i] > layer, "Cannot reference higher layers");
	1568	xConfirmPara(m_acLayerCfg[layer].m_refLayerIds[i] == layer, "Cannot reference the current layer itself");
	1569	}
	1570	}
	1571	#endif
[51]	1572	#undef xConfirmPara
	1573	if (check_failed)
	1574	{
	1575	exit(EXIT_FAILURE);
	1576	}
	1577	}
	1578
	1579	/** \todo use of global variables should be removed later
	1580	*/
	1581	Void TAppEncCfg::xSetGlobal()
	1582	{
	1583	// set max CU width & height
	1584	g_uiMaxCUWidth = m_uiMaxCUWidth;
	1585	g_uiMaxCUHeight = m_uiMaxCUHeight;
	1586
	1587	// compute actual CU depth with respect to config depth and max transform size
	1588	g_uiAddCUDepth = 0;
	1589	while( (m_uiMaxCUWidth>>m_uiMaxCUDepth) > ( 1 << ( m_uiQuadtreeTULog2MinSize + g_uiAddCUDepth ) ) ) g_uiAddCUDepth++;
	1590
	1591	m_uiMaxCUDepth += g_uiAddCUDepth;
	1592	g_uiAddCUDepth++;
	1593	g_uiMaxCUDepth = m_uiMaxCUDepth;
	1594
	1595	// set internal bit-depth and constants
	1596	g_bitDepthY = m_internalBitDepthY;
	1597	g_bitDepthC = m_internalBitDepthC;
	1598
	1599	g_uiPCMBitDepthLuma = m_bPCMInputBitDepthFlag ? m_inputBitDepthY : m_internalBitDepthY;
	1600	g_uiPCMBitDepthChroma = m_bPCMInputBitDepthFlag ? m_inputBitDepthC : m_internalBitDepthC;
	1601	}
	1602
	1603	Void TAppEncCfg::xPrintParameter()
	1604	{
	1605	printf("\n");
[54]	1606	#if SVC_EXTENSION
	1607	printf("Total number of layers : %d\n", m_numLayers );
	1608	for(UInt layer=0; layer<m_numLayers; layer++)
	1609	{
	1610	printf("=== Layer %d settings === \n", layer);
	1611	m_acLayerCfg[layer].xPrintParameter();
	1612	printf("\n");
	1613	}
	1614	printf("=== Common configuration settings === \n");
	1615	printf("Bitstream File : %s\n", m_pBitstreamFile );
	1616	#else
[51]	1617	printf("Input File : %s\n", m_pchInputFile );
	1618	printf("Bitstream File : %s\n", m_pchBitstreamFile );
	1619	printf("Reconstruction File : %s\n", m_pchReconFile );
	1620	printf("Real Format : %dx%d %dHz\n", m_iSourceWidth - m_confLeft - m_confRight, m_iSourceHeight - m_confTop - m_confBottom, m_iFrameRate );
	1621	printf("Internal Format : %dx%d %dHz\n", m_iSourceWidth, m_iSourceHeight, m_iFrameRate );
[54]	1622	#endif
[51]	1623	printf("Frame index : %u - %d (%d frames)\n", m_FrameSkip, m_FrameSkip+m_framesToBeEncoded-1, m_framesToBeEncoded );
	1624	printf("CU size / depth : %d / %d\n", m_uiMaxCUWidth, m_uiMaxCUDepth );
	1625	printf("RQT trans. size (min / max) : %d / %d\n", 1 << m_uiQuadtreeTULog2MinSize, 1 << m_uiQuadtreeTULog2MaxSize );
	1626	printf("Max RQT depth inter : %d\n", m_uiQuadtreeTUMaxDepthInter);
	1627	printf("Max RQT depth intra : %d\n", m_uiQuadtreeTUMaxDepthIntra);
	1628	printf("Min PCM size : %d\n", 1 << m_uiPCMLog2MinSize);
	1629	printf("Motion search range : %d\n", m_iSearchRange );
[54]	1630	#if !SVC_EXTENSION
[51]	1631	printf("Intra period : %d\n", m_iIntraPeriod );
[54]	1632	#endif
[51]	1633	printf("Decoding refresh type : %d\n", m_iDecodingRefreshType );
[54]	1634	#if !SVC_EXTENSION
[51]	1635	printf("QP : %5.2f\n", m_fQP );
[54]	1636	#endif
[51]	1637	printf("Max dQP signaling depth : %d\n", m_iMaxCuDQPDepth);
	1638
	1639	printf("Cb QP Offset : %d\n", m_cbQpOffset );
	1640	printf("Cr QP Offset : %d\n", m_crQpOffset);
	1641
	1642	printf("QP adaptation : %d (range=%d)\n", m_bUseAdaptiveQP, (m_bUseAdaptiveQP ? m_iQPAdaptationRange : 0) );
	1643	printf("GOP size : %d\n", m_iGOPSize );
	1644	printf("Internal bit depth : (Y:%d, C:%d)\n", m_internalBitDepthY, m_internalBitDepthC );
	1645	printf("PCM sample bit depth : (Y:%d, C:%d)\n", g_uiPCMBitDepthLuma, g_uiPCMBitDepthChroma );
	1646	#if RATE_CONTROL_LAMBDA_DOMAIN
	1647	printf("RateControl : %d\n", m_RCEnableRateControl );
	1648	if(m_RCEnableRateControl)
	1649	{
	1650	printf("TargetBitrate : %d\n", m_RCTargetBitrate );
	1651	printf("KeepHierarchicalBit : %d\n", m_RCKeepHierarchicalBit );
	1652	printf("LCULevelRC : %d\n", m_RCLCULevelRC );
	1653	printf("UseLCUSeparateModel : %d\n", m_RCUseLCUSeparateModel );
	1654	printf("InitialQP : %d\n", m_RCInitialQP );
	1655	printf("ForceIntraQP : %d\n", m_RCForceIntraQP );
	1656	}
	1657	#else
	1658	printf("RateControl : %d\n", m_enableRateCtrl);
	1659	if(m_enableRateCtrl)
	1660	{
	1661	printf("TargetBitrate : %d\n", m_targetBitrate);
	1662	printf("NumLCUInUnit : %d\n", m_numLCUInUnit);
	1663	}
	1664	#endif
	1665	printf("Max Num Merge Candidates : %d\n", m_maxNumMergeCand);
	1666	printf("\n");
	1667
	1668	printf("TOOL CFG: ");
	1669	printf("IBD:%d ", g_bitDepthY > m_inputBitDepthY \|\| g_bitDepthC > m_inputBitDepthC);
	1670	printf("HAD:%d ", m_bUseHADME );
	1671	printf("SRD:%d ", m_bUseSBACRD );
	1672	printf("RDQ:%d ", m_useRDOQ );
	1673	printf("RDQTS:%d ", m_useRDOQTS );
	1674	#if L0232_RD_PENALTY
	1675	printf("RDpenalty:%d ", m_rdPenalty );
	1676	#endif
	1677	printf("SQP:%d ", m_uiDeltaQpRD );
	1678	printf("ASR:%d ", m_bUseASR );
	1679	printf("LComb:%d ", m_bUseLComb );
	1680	printf("FEN:%d ", m_bUseFastEnc );
	1681	printf("ECU:%d ", m_bUseEarlyCU );
	1682	printf("FDM:%d ", m_useFastDecisionForMerge );
	1683	printf("CFM:%d ", m_bUseCbfFastMode );
	1684	printf("ESD:%d ", m_useEarlySkipDetection );
	1685	printf("RQT:%d ", 1 );
	1686	printf("TransformSkip:%d ", m_useTransformSkip );
	1687	printf("TransformSkipFast:%d ", m_useTransformSkipFast );
	1688	printf("Slice: M=%d ", m_sliceMode);
	1689	if (m_sliceMode!=0)
	1690	{
	1691	printf("A=%d ", m_sliceArgument);
	1692	}
	1693	printf("SliceSegment: M=%d ",m_sliceSegmentMode);
	1694	if (m_sliceSegmentMode!=0)
	1695	{
	1696	printf("A=%d ", m_sliceSegmentArgument);
	1697	}
	1698	printf("CIP:%d ", m_bUseConstrainedIntraPred);
	1699	printf("SAO:%d ", (m_bUseSAO)?(1):(0));
	1700	printf("PCM:%d ", (m_usePCM && (1<<m_uiPCMLog2MinSize) <= m_uiMaxCUWidth)? 1 : 0);
	1701	printf("SAOLcuBasedOptimization:%d ", (m_saoLcuBasedOptimization)?(1):(0));
	1702
	1703	printf("LosslessCuEnabled:%d ", (m_useLossless)? 1:0 );
	1704	printf("WPP:%d ", (Int)m_useWeightedPred);
	1705	printf("WPB:%d ", (Int)m_useWeightedBiPred);
	1706	printf("PME:%d ", m_log2ParallelMergeLevel);
[54]	1707	#if !SVC_EXTENSION
[51]	1708	printf(" WaveFrontSynchro:%d WaveFrontSubstreams:%d",
	1709	m_iWaveFrontSynchro, m_iWaveFrontSubstreams);
[54]	1710	#endif
[51]	1711	printf(" ScalingList:%d ", m_useScalingListId );
	1712	printf("TMVPMode:%d ", m_TMVPModeId );
	1713	#if ADAPTIVE_QP_SELECTION
	1714	printf("AQpS:%d", m_bUseAdaptQpSelect );
	1715	#endif
	1716
	1717	printf(" SignBitHidingFlag:%d ", m_signHideFlag);
[54]	1718	#if SVC_EXTENSION
	1719	printf("RecalQP:%d ", m_recalculateQPAccordingToLambda ? 1 : 0 );
	1720	printf("AVC_BASE:%d ", AVC_BASE);
	1721	#if REF_IDX_FRAMEWORK
	1722	printf("REF_IDX_FRAMEWORK:%d ", REF_IDX_FRAMEWORK);
	1723	printf("EL_RAP_SliceType: %d ", m_elRapSliceBEnabled);
	1724	printf("REF_IDX_ME_ZEROMV: %d", REF_IDX_ME_ZEROMV);
	1725	#elif INTRA_BL
	1726	printf("INTRA_BL:%d ", INTRA_BL);
	1727	#if !AVC_BASE
	1728	printf("SVC_MVP:%d ", SVC_MVP );
	1729	printf("SVC_BL_CAND_INTRA:%d", SVC_BL_CAND_INTRA );
	1730	#endif
	1731	#endif
	1732	#else
[51]	1733	printf("RecalQP:%d", m_recalculateQPAccordingToLambda ? 1 : 0 );
[54]	1734	#endif
[51]	1735	printf("\n\n");
	1736
	1737	fflush(stdout);
	1738	}
	1739
	1740	Bool confirmPara(Bool bflag, const Char* message)
	1741	{
	1742	if (!bflag)
	1743	return false;
	1744
	1745	printf("Error: %s\n",message);
	1746	return true;
	1747	}
	1748
	1749	//! \}

Note: See TracBrowser for help on using the repository browser.

JCT-VC SHVC

Context navigation

source: SHVCSoftware/branches/HM-10.0-dev-SHM/source/App/TAppEncoder/TAppEncCfg.cpp @ 1606

Download in other formats: