Context navigation

source: 3DVCSoftware/branches/HTM-12.1-MV-draft-1/cfg/MV-HEVC/fullCfg.cfg @ 1075

Visit:

Last change on this file since 1075 was 1066, checked in by tech, 10 years ago
Merged 12.0-dev1@1065.
File size: 24.2 KB

Line
1	#======== Legend for comments =====================
2	# (m) specification per layer/dimension/layerset possible
3	# (c) cyclic repetition of values, if not given for all layers/dimensions/layersets. (e.g. 5 layers and 1 2 3 -> 1 2 3 1 2 )
4
5	#======== File I/O =====================
6
7	InputFile_0 : newspapercc_4.yuv
8	InputFile_1 : newspapercc_2.yuv
9	InputFile_2 : newspapercc_6.yuv
10	InputFile_3 :
11	InputFile_4 :
12	InputFile_5 :
13	InputFile_6 :
14	InputFile_7 :
15	InputFile_8 :
16	InputFile_9 :
17	InputFile_10 :
18	InputFile_11 :
19
20	BitstreamFile : stream.bit
21
22	ReconFile_0 : rec_4.yuv
23	ReconFile_1 : rec_2.yuv
24	ReconFile_2 : rec_6.yuv
25	ReconFile_3 :
26	ReconFile_4 :
27	ReconFile_5 :
28	ReconFile_6 :
29	ReconFile_7 :
30	ReconFile_8 :
31	ReconFile_9 :
32	ReconFile_10 :
33	ReconFile_11 :
34
35
36	NumberOfLayers : 3 # Number of layers
37	TargetEncLayerIdList : # Layer Id in Nuh to be encoded, (empty:-> all layers will be encode)
38
39	FramesToBeEncoded : 3 # Number of frames to be coded
40	FrameRate : 30 # Frame Rate per second
41	SourceWidth : 1024 # Input frame width
42	SourceHeight : 768 # Input frame height
43
44	#======== VPS ============================
45	ScalabilityMask : 2 # Scalability Mask ( Scalability Mask: 2: Multiview, 8: Auxiliary, 10: Multiview + Auxiliary )
46	DimensionIdLen : 3 # Number of bits to store Ids, per scalability dimension, (m)
47	ViewOrderIndex : 0 1 2 # ViewOrderIndex, per layer (m)
48	AuxId : # Auxiliary Id, per layer (m)
49	LayerIdInNuh : 0 # Layer Id in NAL unit header, (0: no explicit signalling, otherwise per layer ) (m)
50	SplittingFlag : 0 # Splitting Flag
51	ViewId : 1 0 2 # ViewId, per ViewOrderIndex (m)
52	OutputVpsInfo : 0 # Output VPS information
53
54	#======== VPS/ Layer sets ================
55	VpsNumLayerSets : 4 # Number of layer sets
56	LayerIdsInSet_0 : 0 # Indices in VPS of layers in layer set 0
57	LayerIdsInSet_1 : 0 1 # Indices in VPS of layers in layer set 1
58	LayerIdsInSet_2 : 0 2 # Indices in VPS of layers in layer set 2
59	LayerIdsInSet_3 : 0 1 2 # Indices in VPS of layers in layer set 3
60	LayerIdsInSet_4 :
61	LayerIdsInSet_5 :
62	LayerIdsInSet_6 :
63	LayerIdsInSet_7 :
64	LayerIdsInSet_8 :
65	LayerIdsInSet_9 :
66	LayerIdsInSet_10 :
67
68	NumAddLayerSets : 0 # Specifies the number of additional layer sets
69	HighestLayerIdxPlus1_0 : -1 # Highest layer idx plus 1 for the 0-th additional layer set, per independent layer (m) (first value will be ignored)
70	HighestLayerIdxPlus1_1 : -1 # Highest layer idx plus 1 for the 1-th additional layer set, per independent layer (m) (first value will be ignored)
71	HighestLayerIdxPlus1_2 : -1 # Highest layer idx plus 1 for the 2-th additional layer set, per independent layer (m) (first value will be ignored)
72	HighestLayerIdxPlus1_3 : -1 # Highest layer idx plus 1 for the 4-th additional layer set, per independent layer (m) (first value will be ignored)
73	HighestLayerIdxPlus1_4 : -1 # Highest layer idx plus 1 for the 5-th additional layer set, per independent layer (m) (first value will be ignored)
74	HighestLayerIdxPlus1_5 : -1 # Highest layer idx plus 1 for the 6-th additional layer set, per independent layer (m) (first value will be ignored)
75	HighestLayerIdxPlus1_6 : -1 # Highest layer idx plus 1 for the 7-th additional layer set, per independent layer (m) (first value will be ignored)
76
77	#======== VPS / Output layer sets ================
78
79	DefaultTargetOutputLayerIdc : 0 # Specifies output layers of layer sets, 0: output all layers, 1: output highest layer, 2: specified by LayerIdsInDefOutputLayerSet
80	LayerIdsInDefOutputLayerSet_0 : # Indices in VPS of output layers in layer set 0 (when DefaultTargetOutputLayerIdc is equal to 2)
81	LayerIdsInDefOutputLayerSet_1 : # Indices in VPS of output layers in layer set 1 (when DefaultTargetOutputLayerIdc is equal to 2)
82	LayerIdsInDefOutputLayerSet_2 : # Indices in VPS of output layers in layer set 2 (when DefaultTargetOutputLayerIdc is equal to 2)
83	LayerIdsInDefOutputLayerSet_3 : # Indices in VPS of output layers in layer set 3 (when DefaultTargetOutputLayerIdc is equal to 2)
84	LayerIdsInDefOutputLayerSet_4 : # Indices in VPS of output layers in layer set 4 (when DefaultTargetOutputLayerIdc is equal to 2)
85	LayerIdsInDefOutputLayerSet_5 : # Indices in VPS of output layers in layer set 5 (when DefaultTargetOutputLayerIdc is equal to 2)
86	LayerIdsInDefOutputLayerSet_6 : # Indices in VPS of output layers in layer set 6 (when DefaultTargetOutputLayerIdc is equal to 2)
87	LayerIdsInDefOutputLayerSet_7 : # Indices in VPS of output layers in layer set 7 (when DefaultTargetOutputLayerIdc is equal to 2)
88	LayerIdsInDefOutputLayerSet_8 : # Indices in VPS of output layers in layer set 8 (when DefaultTargetOutputLayerIdc is equal to 2)
89	LayerIdsInDefOutputLayerSet_9 : # Indices in VPS of output layers in layer set 9 (when DefaultTargetOutputLayerIdc is equal to 2)
90
91
92	OutputLayerSetIdx : 1 2 # Indices of layer sets used to derive additional output layer sets
93	LayerIdsInAddOutputLayerSet_0 : 1 # Indices in VPS of output layers in additional output layer set 0
94	LayerIdsInAddOutputLayerSet_1 : 2 # Indices in VPS of output layers in additional output layer set 1
95	LayerIdsInAddOutputLayerSet_2 : # Indices in VPS of output layers in additional output layer set 2
96	LayerIdsInAddOutputLayerSet_3 : # Indices in VPS of output layers in additional output layer set 3
97	LayerIdsInAddOutputLayerSet_4 : # Indices in VPS of output layers in additional output layer set 4
98	LayerIdsInAddOutputLayerSet_5 : # Indices in VPS of output layers in additional output layer set 5
99	LayerIdsInAddOutputLayerSet_6 : # Indices in VPS of output layers in additional output layer set 6
100	LayerIdsInAddOutputLayerSet_7 : # Indices in VPS of output layers in additional output layer set 7
101	LayerIdsInAddOutputLayerSet_8 : # Indices in VPS of output layers in additional output layer set 8
102	LayerIdsInAddOutputLayerSet_9 : # Indices in VPS of output layers in additional output layer set 9
103	LayerIdsInAddOutputLayerSet_10: # Indices in VPS of output layers in additional output layer set 10
104
105	#======== VPS / PTLI ================
106
107	Profile : main main multiview-main # Profile indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
108	Level : none none none # Level indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
109	Tier : main main main # Tier indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
110	InblFlag : 0 0 0 # Inbl indication in VpsProfileTierLevel, per VpsProfileTierLevel syntax structure (m)
111
112	ProfileTierLevelIdx_0 : 1 # VpsProfileTierLevel indices of layers in output layer set 0 (m) (should be -1, when layer is not necessary)
113	ProfileTierLevelIdx_1 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 1 (m) (should be -1, when layer is not necessary)
114	ProfileTierLevelIdx_2 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 2 (m) (should be -1, when layer is not necessary)
115	ProfileTierLevelIdx_3 : 1 2 2 # VpsProfileTierLevel indices of layers in output layer set 3 (m) (should be -1, when layer is not necessary)
116	ProfileTierLevelIdx_4 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 4 (m) (should be -1, when layer is not necessary)
117	ProfileTierLevelIdx_5 : 1 2 # VpsProfileTierLevel indices of layers in output layer set 5 (m) (should be -1, when layer is not necessary)
118	ProfileTierLevelIdx_6 : # VpsProfileTierLevel indices of layers in output layer set 6 (m) (should be -1, when layer is not necessary)
119	ProfileTierLevelIdx_7 : # VpsProfileTierLevel indices of layers in output layer set 7 (m) (should be -1, when layer is not necessary)
120	ProfileTierLevelIdx_8 : # VpsProfileTierLevel indices of layers in output layer set 8 (m) (should be -1, when layer is not necessary)
121	ProfileTierLevelIdx_9 : # VpsProfileTierLevel indices of layers in output layer set 9 (m) (should be -1, when layer is not necessary)
122	ProfileTierLevelIdx_10 : # VpsProfileTierLevel indices of layers in output layer set 10 (m) (should be -1, when layer is not necessary)
123	ProfileTierLevelIdx_11 : # VpsProfileTierLevel indices of layers in output layer set 11 (m) (should be -1, when layer is not necessary)
124	ProfileTierLevelIdx_12 : # VpsProfileTierLevel indices of layers in output layer set 12 (m) (should be -1, when layer is not necessary)
125	ProfileTierLevelIdx_13 : # VpsProfileTierLevel indices of layers in output layer set 13 (m) (should be -1, when layer is not necessary)
126	ProfileTierLevelIdx_14 : # VpsProfileTierLevel indices of layers in output layer set 14 (m) (should be -1, when layer is not necessary)
127
128	#======== VPS / Dependencies ================
129	DirectRefLayers_1 : 0 # Indices in VPS of direct reference layers
130	DirectRefLayers_2 : 0 # Indices in VPS of direct reference layers
131	DirectRefLayers_3 : # Indices in VPS of direct reference layers
132	DirectRefLayers_4 : # Indices in VPS of direct reference layers
133	DirectRefLayers_5 : # Indices in VPS of direct reference layers
134
135	DependencyTypes_1 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
136	DependencyTypes_2 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
137	DependencyTypes_3 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
138	DependencyTypes_4 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
139	DependencyTypes_5 : 2 # Dependency types of direct reference layers, 0: Sample 1: Motion 2: Sample+Motion
140
141
142	#======== Unit definition ================
143	MaxCUWidth : 64 # Maximum coding unit width in pixel
144	MaxCUHeight : 64 # Maximum coding unit height in pixel
145	MaxPartitionDepth : 4 # Maximum coding unit depth
146	QuadtreeTULog2MaxSize : 5 # Log2 of maximum transform size for
147	# quadtree-based TU coding (2...6)
148	QuadtreeTULog2MinSize : 2 # Log2 of minimum transform size for
149	# quadtree-based TU coding (2...6)
150	QuadtreeTUMaxDepthInter : 3
151	QuadtreeTUMaxDepthIntra : 3
152
153	#======== Coding Structure =============
154	IntraPeriod : 24 # Period of I-Frame ( -1 = only first)
155	DecodingRefreshType : 1 # Random Accesss 0:none, 1:CDR, 2:IDR
156	GOPSize : 8 # GOP Size (number of B slice = GOPSize-1)
157
158	# QPfactor betaOffsetDiv2 #ref_pics_active reference pictures deltaRPS reference idcs ilPredLayerIdc refLayerPicPosIl_L1
159	# Type POC QPoffset tcOffsetDiv2 temporal_id #ref_pics predict #ref_idcs #ActiveRefLayerPics refLayerPicPosIl_L0
160
161	Frame1: B 8 1 0.442 0 0 0 4 4 -8 -10 -12 -16 0 0
162	Frame2: B 4 2 0.3536 0 0 0 2 3 -4 -6 4 1 4 5 1 1 0 0 1 0
163	Frame3: B 2 3 0.3536 0 0 0 2 4 -2 -4 2 6 1 2 4 1 1 1 1 0
164	Frame4: B 1 4 0.68 0 0 0 2 4 -1 1 3 7 1 1 5 1 0 1 1 1 0
165	Frame5: B 3 4 0.68 0 0 0 2 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 0
166	Frame6: B 6 3 0.3536 0 0 0 2 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 0
167	Frame7: B 5 4 0.68 0 0 0 2 4 -1 -5 1 3 1 1 5 1 0 1 1 1 0
168	Frame8: B 7 4 0.68 0 0 0 2 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 0
169
170	FrameI_l1: P 0 3 0.442 0 0 0 1 0 0 1 0 0 -1
171	Frame1_l1: B 8 4 0.442 0 0 0 4 4 -8 -10 -12 -16 0 1 0 1 -1
172	Frame2_l1: B 4 5 0.3536 0 0 0 3 3 -4 -6 4 1 4 5 1 1 0 0 1 1 0 1 -1
173	Frame3_l1: B 2 6 0.3536 0 0 0 3 4 -2 -4 2 6 1 2 4 1 1 1 1 1 0 1 -1
174	Frame4_l1: B 1 7 0.68 0 0 0 3 4 -1 1 3 7 1 1 5 1 0 1 1 1 1 0 1 -1
175	Frame5_l1: B 3 7 0.68 0 0 0 3 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 1 0 2 -1
176	Frame6_l1: B 6 6 0.3536 0 0 0 3 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 1 0 2 -1
177	Frame7_l1: B 5 7 0.68 0 0 0 3 4 -1 -5 1 3 1 1 5 1 0 1 1 1 1 0 2 -1
178	Frame8_l1: B 7 7 0.68 0 0 0 3 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 1 0 2 -1
179
180	FrameI_l2: P 0 3 0.442 0 0 0 1 0 0 1 0 0 -1
181	Frame1_l2: B 8 4 0.442 0 0 0 4 4 -8 -10 -12 -16 0 1 0 1 -1
182	Frame2_l2: B 4 5 0.3536 0 0 0 3 3 -4 -6 4 1 4 5 1 1 0 0 1 1 0 1 -1
183	Frame3_l2: B 2 6 0.3536 0 0 0 3 4 -2 -4 2 6 1 2 4 1 1 1 1 1 0 1 -1
184	Frame4_l2: B 1 7 0.68 0 0 0 3 4 -1 1 3 7 1 1 5 1 0 1 1 1 1 0 1 -1
185	Frame5_l2: B 3 7 0.68 0 0 0 3 4 -1 -3 1 5 1 -2 5 1 1 1 1 0 1 0 2 -1
186	Frame6_l2: B 6 6 0.3536 0 0 0 3 4 -2 -4 -6 2 1 -3 5 1 1 1 1 0 1 0 2 -1
187	Frame7_l2: B 5 7 0.68 0 0 0 3 4 -1 -5 1 3 1 1 5 1 0 1 1 1 1 0 2 -1
188	Frame8_l2: B 7 7 0.68 0 0 0 3 4 -1 -3 -7 1 1 -2 5 1 1 1 1 0 1 0 2 -1
189
190	FrameI_l3:
191	Frame1_l3:
192	Frame2_l3:
193	Frame3_l3:
194	Frame4_l3:
195	Frame5_l3:
196	Frame6_l3:
197	Frame7_l3:
198	Frame8_l3:
199
200	FrameI_l4:
201	Frame1_l4:
202	Frame2_l4:
203	Frame3_l4:
204	Frame4_l4:
205	Frame5_l4:
206	Frame6_l4:
207	Frame7_l4:
208	Frame8_l4:
209
210	FrameI_l5:
211	Frame1_l5:
212	Frame2_l5:
213	Frame3_l5:
214	Frame4_l5:
215	Frame5_l5:
216	Frame6_l5:
217	Frame7_l5:
218	Frame8_l5:
219
220
221	#=========== Motion Search =============
222	FastSearch : 1 # 0:Full search 1:TZ search
223	SearchRange : 64 # (0: Search range is a Full frame)
224	BipredSearchRange : 4 # Search range for bi-prediction refinement
225	HadamardME : 1 # Use of hadamard measure for fractional ME
226	FEN : 1 # Fast encoder decision
227	FDM : 1 # Fast Decision for Merge RD cost
228
229	#======== Quantization =============
230	QP : 25 # quantization parameter (mc)
231	MaxDeltaQP : 0 # CU-based multi-QP optimization
232	MaxCuDQPDepth : 0 # Max depth of a minimum CuDQP for sub-LCU-level delta QP
233	DeltaQpRD : 0 # Slice-based multi-QP optimization
234	RDOQ : 1 # RDOQ
235	RDOQTS : 1 # RDOQ for transform skip
236
237	#=========== Deblock Filter ============
238	DeblockingFilterControlPresent: 1 # Dbl control params present (0=not present, 1=present) (mc)
239	LoopFilterOffsetInPPS : 0 # Dbl params: 0=varying params in SliceHeader, param = base_param + GOP_offset_param; 1=constant params in PPS, param = base_param)
240	LoopFilterDisable : 0 # Disable deblocking filter (0=Filter, 1=No Filter) (mc)
241	LoopFilterBetaOffset_div2 : 0 # base_param: -6 ~ 6
242	LoopFilterTcOffset_div2 : 0 # base_param: -6 ~ 6
243	DeblockingFilterMetric : 0 # blockiness metric (automatically configures deblocking parameters in bitstream)
244
245	#=========== Misc. ============
246	InternalBitDepth : 8 # codec operating bit-depth
247
248	#=========== Coding Tools =================
249	SAO : 1 # Sample adaptive offset (0: OFF, 1: ON) (mc)
250	AMP : 1 # Asymmetric motion partitions (0: OFF, 1: ON)
251	TransformSkip : 1 # Transform skipping (0: OFF, 1: ON)
252	TransformSkipFast : 1 # Fast Transform skipping (0: OFF, 1: ON)
253	SAOLcuBoundary : 0 # SAOLcuBoundary using non-deblocked pixels (0: OFF, 1: ON)
254
255	#============ Slices ================
256	SliceMode : 0 # 0: Disable all slice options.
257	# 1: Enforce maximum number of LCU in an slice,
258	# 2: Enforce maximum number of bytes in an 'slice'
259	# 3: Enforce maximum number of tiles in a slice
260	SliceArgument : 1500 # Argument for 'SliceMode'.
261	# If SliceMode==1 it represents max. SliceGranularity-sized blocks per slice.
262	# If SliceMode==2 it represents max. bytes per slice.
263	# If SliceMode==3 it represents max. tiles per slice.
264
265	LFCrossSliceBoundaryFlag : 1 # In-loop filtering, including ALF and DB, is across or not across slice boundary.
266	# 0:not across, 1: across
267
268	#============ PCM ================
269	PCMEnabledFlag : 0 # 0: No PCM mode
270	PCMLog2MaxSize : 5 # Log2 of maximum PCM block size.
271	PCMLog2MinSize : 3 # Log2 of minimum PCM block size.
272	PCMInputBitDepthFlag : 1 # 0: PCM bit-depth is internal bit-depth. 1: PCM bit-depth is input bit-depth.
273	PCMFilterDisableFlag : 0 # 0: Enable loop filtering on I_PCM samples. 1: Disable loop filtering on I_PCM samples.
274
275	#============ Tiles ================
276	UniformSpacingIdc : 0 # 0: the column boundaries are indicated by ColumnWidth array, the row boundaries are indicated by RowHeight array
277	# 1: the column and row boundaries are distributed uniformly
278	NumTileColumnsMinus1 : 0 # Number of columns in a picture minus 1
279	ColumnWidthArray : 2 3 # Array containing ColumnWidth values in units of LCU (from left to right in picture)
280	NumTileRowsMinus1 : 0 # Number of rows in a picture minus 1
281	RowHeightArray : 2 # Array containing RowHeight values in units of LCU (from top to bottom in picture)
282
283	LFCrossTileBoundaryFlag : 1 # In-loop filtering is across or not across tile boundary.
284	# 0:not across, 1: across
285
286	#============ WaveFront ================
287	WaveFrontSynchro : 0 # 0: No WaveFront synchronisation (WaveFrontSubstreams must be 1 in this case).
288	# >0: WaveFront synchronises with the LCU above and to the right by this many LCUs.
289
290	#=========== Quantization Matrix =================
291	ScalingList : 0 # ScalingList 0 : off, 1 : default, 2 : file read
292	ScalingListFile : scaling_list.txt # Scaling List file name. If file is not exist, use Default Matrix.
293
294	#============ Lossless ================
295	TransquantBypassEnableFlag: 0 # Value of PPS flag.
296	CUTransquantBypassFlagForce: 0 # Constant lossless-value signaling per CU, if TransquantBypassEnableFlag is 1.
297
298	#============ Rate Control ======================
299	RateControl : 0 # Rate control: enable rate control
300	TargetBitrate : 1000000 # Rate control: target bitrate, in bps
301	KeepHierarchicalBit : 1 # Rate control: keep hierarchical bit allocation in rate control algorithm
302	LCULevelRateControl : 1 # Rate control: 1: LCU level RC; 0: picture level RC
303	RCLCUSeparateModel : 1 # Rate control: use LCU level separate R-lambda model
304	InitialQP : 0 # Rate control: initial QP
305	RCForceIntraQP : 0 # Rate control: force intra QP to be equal to initial QP
306
307	### DO NOT ADD ANYTHING BELOW THIS LINE ###
308	### DO NOT DELETE THE EMPTY LINE BELOW ###

Note: See TracBrowser for help on using the repository browser.

Download in other formats: